User manual

Page 70 of 79
11.3.5 While scanning
The decision to apply image enhancement during scanning is dependent on several factors such as
• the capacity of scan work station
• the performance of scan work station
• the type of scanner
• the page orientation (rotation) selected
• the type of documents (simplex or duplex).
because all these factors influence and can slow down the scan process.
Select Batch àScanàSetup in the main window and select by clicking on the radio buttons.
Figure 79: image enhancement while scanning
11.3.6 While generating CD
If it is decided to execute Image Enhancement during CD generation (only applicable for Application
Batches) select this option on the General settings window.
Figure 80: image enhancement while generating CD
11.3.7 As a separate process
In the main Window select Image à Batch Image Enhancement àSelect Batch(es) à Select OK.
Image enhancement will now be applied to all images of the selected batches/packages.
11.4 Calibration Manager
The Calibration Manager should be used to calibrate the scanner. In the main window:
• select Setup
• select Calibration Manager.
The wizard will guide the user through the calibration process
If the quality of the image is not satisfactory then changes to the scanner settings, such as
brightness and contrast, can be made.
Changes to the scan area can also be made.