User manual

Page 56 of 79
11.2 Barcode reading
Select Setup à Barcode Reading. The Barcode Reader Configuration screen will be displayed.
Figure 68: barcode reader configuration
In this window the region, where barcodes are located on the different barcode sheets, can be
configured. To assist in this process a previously scanned barcode sheet can be selected to define
this area. The size of the region will have an influence on the barcode reading performance and
slows down the scanning process.
11.2.1 Scanner configuration
The scanner which is connected to a single PC or on several machines connected to a central
server must be configured.
• Ensure that the ASPI32 drivers have been installed
• Select Setup à Options in the main window
• Select Type of Scanner:
• If scanning with an ISIS
®
driver select ISIS
®
and then select the ISIS
®
Tab
• If scanning with a Kodak Twain driver select Kodak and then select the Kodak Tab.
Use region