User manual

Page 53 of 79
11.1.4.2 Firebird database
Note
It is recommended to rename the database to, for example, 200603_app.gdb because it is a
requirement to start with an empty database at regular intervals, suggested as once per
month.
The database templates (.gdb) must be copied to the server before proceeding with the
configuration.
Figure 64: configuration options: databases: Firebird
Firebird is normally installed on a (scan) server, where the name of the scan server is entered
during installation of epoScan.
Enter the path in which databases are stored on the server. The drive on the server must be
entered here. Once completed Test connection can be used to see if the server is available.
Make sure that the Report Database points to the same path as the Applications Database.
Click on OK.