User manual

Page 45 of 79
10.1 Scanning mode
Options
Option Result
Stop Index file is used during scanning. Scanning will stop if a mismatch
between pages indexed and pages scanned is found. Scan operator is
able to correct scan/index errors immediately.
Non stop Index file is used during scanning but scanning doesn’t stop. When
scanning is complete an automatic index process will run. During this
process the comparison between pages indexed and pages scanned is
made. If errors are found they are displayed in a list and the operator can
correct the errors using the Document Correction functionality.
Post controls No index file required.
Used for scanning other- and patent documents.
If patent document are scanned in this mode, images can be used for
manual indexing afterwards.
10.2 Scanning configuration
10.2.1 Page orientation
Dependent on the paper quality (for example; position of staple holes, position of perforated date)
specific page orientation can be selected.
Scanning in landscape mode gives a 25% performance increase.
10.2.2 Software rotation
Most scanners can cope with pages fed in widthways and will rotate the image accordingly.
However, some devices may have difficulties in which case this setting will allow the epoScan
software to do the rotation (this is slower).
Checking this box will solve a known problem with Kodak 1500D.
10.3 Image
This setting determines the quality of the image scanned. Use binary for plain black text on white
paper and for documents with shades of grey use the appropriate level of grey. The more shades of
grey the larger the image file becomes.
Figure 53: image tabs
Click on Adjust. The Color detection settings screen is displayed