User's Manual

Connecting the Keyboard

After you connect your monitor to the main unit, you can connect

the keyboard. The keyboard cable is attached to the keyboard at one

end. Insert the other end into the socket marked KEYBOARD on the rear

panel of the main unit, as shown in Figure 1-6. Do not force the connec-

tor, but make sure you insert it all the way.

Figure 1-6. Connecting the keyboard

You can use the keyboard in various positions-including flat on a

desk or on your lap. You can also tilt the angle of the keyboard by adjust-

ing the legs on the bottom. To adjust the legs, turn the keyboard over and

lift each leg upward until it locks into place, as Figure 1-7 shows.