User's Manual

Post-installation Setup
After you install an option card (and replace the main unit’s cover and
reconnect the power cord and peripherals), you may need to run the Setup
program on the diagnostics diskette to update the configuration informa-
tion. For example, if you add a hard disk, you need to tell the computer that
it has the additional drive. See your Diagnostics manual for instructions.
You may also need to add some commands in the configuration files on
your system disk. See your MS-DOS manual for instructions.
When you finish installing an option and reconfiguring the system, you
should test the option if possible. Some options come with their own diag-
nostic test programs, and you can test others with your diagnostics diskette
that came with the Equity III+. These include:
l Expansion memory
l 80287 numeric coprocessor
l Serial and parallel ports
l Monitors and display adapters
l Disk drives.
See your Diagnostics manual for instructions.
4-8