User's Manual

Figure 4-1. Buck panel mews
4. Turn the main unit around so the front panel faces you. Hold on to the
two sides of the cover and carefully pull it straight toward you, away
from the back of the computer, as shown in Figure 4-2, until it is about
an inch past the power switch. The cover fits tightly, so if you have
trouble moving it at first, keep pulling it back firmly.
Figure 4-2. Sliding back the cover
5. When the back edge of the cover is a few inches away from the back
panel, you can lift it off. Separate the sides of the cover from the bottom
ledge of the computer by pulling them outward slightly, as shown in
Figure 4-3. Then lift off the cover and set it aside.
4-2