User's Manual
Note: If a monochrome monitor has the proper type of plug, you can
plug it into the auxiliary outlet next to the power inlet at the back
of the Equity III+ main unit.
5.
Set the monitor switch on the front panel of the main unit for the type of
monitor you are using. (See Figure 1-2.) Slide the switch to the left for a
monochrome monitor or to the right for a color monitor.
Connecting the Keyboard
Follow these steps to connect the keyboard:
1.
Connect the cable to the keyboard as shown in Figure 1-6. If there is a
plastic band around the connector, remove it first.
Figure 1-6. Connecting the cable to the keyboard
2.
Open the cover on the lower left corner on the front panel of the main
unit, as shown in Figure 1-7.
Figure 1-7. Opening the keyboard connector cover
1-9