Specifications

4-22
Troubleshooting
The paper size setting in
your application or the
printer driver may not match
the size of the paper you are
using.
Check the paper size setting in your
application or the printer driver.
The printer’s page length
setting for the tractor may
not match the size of the
continuous paper you are
using.
Check Page length for tractor of the
printer’s default settings. See
“Changing default settings” on page
3-12.
Printing starts lower on the page than you expect, or the bottom
of a page is printed at the top of the next page.
Cause What to do
The lines-per-page, top and
bottom margin, or form
length setting is incorrect.
Adjust these settings in your
application software, as follows:
If your application software has a
lines-per-page setting, set it to 66 for
letter size paper or 70 for A4 size paper.
If your software does not have a
lines-per-page setting, try decreasing
the top margin or increasing the
bottom margin, or both, until you get
the results you want. Adjust the form
length setting if your software has this
option.
Vertical printed lines are not aligned.
Cause What to do
Bidirectional printing, which
is the printer’s standard
printing mode, may be out of
alignment.
Use the printer’s bidirectional
adjustment mode to correct this
problem. See “Aligning Vertical Lines
in Your Printout” on page 4-27.