Specifications

Troubleshooting
4-21
Top margin and loading
position settings made in
your Windows applications
override settings you make
in the SelecType mode.
Use your application software to make
these settings.
Note:
If you want to eliminate the top
margin and print at the very top of
the page, adjust the top margin in
your Windows application little by
little until text is printed at the very
top of the page.
All the text is printed on the same line.
Cause What to do
No line feed command is
sent at the end of each line of
text.
Turn on the auto line feed option in the
default-settings mode, so that the
printer automatically adds a line feed
code to each carriage return. See
“Changing default settings” on page
3-12.
The printout has extra blank lines between lines of text.
Cause What to do
Two line feed commands are
being sent at the end of each
line of text.
Turn off the auto line feed option in the
default-settings mode. See “Changing
default settings” on page 3-12.
The line space setting in your
application software is
incorrect.
Adjust the line space setting in your
application software.
The length of the printing on the page does not match your
paper length.
Cause What to do