Specifications

4-12
Troubleshooting
The right and left paper
guides are too far apart.
Position the paper guides to match the
width of your paper.
The paper is old or creased. Use only new, clean sheets of paper.
You may not be using the
right type of paper for the
cut-sheet feeder. For
example, your paper may be
too heavy or too light.
Make sure your paper meets the
requirements of your printer and
cut-sheet feeder. See
“Paper” on page
A-10 for information on
the paper
specifications.
When the printer ejects the paper, the Paper Out flashes and
the Pause light comes on.
Cause What to do
The printer has not fully
ejected your paper.
Remove the paper by hand; the Paper
Out light goes out. Press the Pause
button to resume printing.
When you try to load single-sheet paper manually, the printer
loads the paper from the cut-sheet feeder.
Cause What to do
The paper was not properly
loaded in the paper guide.
Load the paper in the paper guide as
“Loading single sheets from the front”
on page 1-18.
One page of your document is printed on two pages.
Cause What to do
The paper size setting in
your application software
does not match the size of the
paper loaded in the printer.
Adjust the paper size setting in your
application or the printer driver.