Specifications

Troubleshooting
4-11
The cut-sheet feeder is
installed incorrectly.
Reinstall it correctly. See “Installing
the cut-sheet feeder” on page 5-5.
Tractor is selected as the
paper source on the control
panel.
Select Manual/CSF as the paper
source on the control panel. (See
“Buttons and Lights” on page 3-1.)
The right and left paper
guides are too close to the
paper stack, preventing the
paper from feeding
smoothly.
Adjust the paper guides to match the
width of your paper.
Paper is jammed inside the
printer.
Clear the paper jam as described in
“Clearing a Paper Jam” on page 4-26.
There are only a few sheets of
paper left in the bin.
Add more paper.
You may have loaded too
many sheets in the bin.
Remove some sheets. See “Paper” on
page A-10 for information on the types
and quantity of paper that can be
loaded with the cut-sheet feeder.
The cut-sheet feeder feeds more than one sheet at a time.
Cause What to do
You may have loaded too
many sheets in the bin.
Remove some sheets. See “Paper” on
page A-10 for information on the types
and quantity of paper that can be
loaded with the cut-sheet feeder.
Sheets of paper are stuck
together.
Remove the paper stack, fan it, and
then reload it.
Paper feeding is crooked.
Cause What to do