Specifications

Troubleshooting
4-5
Paper loading or feeding problems
Single sheets
The power cord is not
properly plugged into the
electrical outlet; or if your
power cord is not
permanently attached to
your printer, the power cord
is not properly plugged into
the printer.
Turn off the printer and make sure the
power cord is firmly plugged into the
electrical outlet and the printer, if
necessary. Then turn on the power
switch.
The electrical outlet is
controlled by an outside
switch or automatic timer.
Use a different outlet.
The electrical outlet does not
work.
Plug another electrical device, such as
a lamp, into the outlet to check if the
outlet is working properly. If it is not,
use a different outlet.
The printer does not load single-sheet paper or does not feed
it properly.
Cause What to do
Continuous paper is in the
paper path.
Press the Load/Eject button to
remove the continuous paper. Select
Manual/CSF as the paper source on
the control panel and insert a new
sheet. (See “Switching to single sheets”
on page 1-34 for more information.)