Specifications

Troubleshooting
4-3
n = on, o = off, f = flashing
••• = short series of beeps (three beeps), ••••• = long series of beeps (five beeps)
Note:
The printer beeps once if you press a control panel button when the
corresponding function is not available.
Problems and Solutions
Most problems you may encounter while operating your printer
have simple solutions. Use the information in this section to find
the source of and solution to printer problems that occur.
Determine the type of problem that occurred, and see the
appropriate section below:
f Paper Out
f Pause
ff Tear Off/
Special Paper
fff Font
fff Pitch
••••• An unknown printer error has occurred.
Turn off the printer and leave it off for several
minutes; then turn it on again. If the error
recurs, contact your dealer.
o Paper Out
f Pause
– The print head is overheated.
Wait for a few minutes; the printer resumes
printing automatically once the print head
cools.
“Power supply problems” on page 4-4
“Paper loading or feeding problems” on page
4-5
“Printing position problems” on page 4-13
“Printing or printout quality problems” on page
4-16