Specifications

Control Panel
3-11
Auto CR (carriage return)
This setting is available only in IBM PPDS emulation mode. When
auto carriage return is on, each line feed (LF) code or ESC J code
is accompanied by a carriage return (CR) code so the printer
moves the next printing position to the left margin. When this
setting is off, you must send a CR code after the line feed code to
move the printing position to the left margin.
A.G.M. (IBM)
Turn on the alternate graphic mode (A.G.M.) to make the ESC 3,
ESC A, ESC J, ESC K, ESC L, ESC Y, ESC Z, and ESC * commands
in IBM PPDS emulation mode work the same way as in ESC/P 2
mode.
The A.G.M. feature is available only in IBM PPDS emulation
mode.
Character table
You can select from among 13 to 36 standard character tables,
depending on the country of purchase. See “Default-setting
mode” on page 3-7 for more information.
International character set for italic table
You can select among several international character sets for the
italic character table. Each character set contains eight characters
that vary depending on the country or language, so you can
customize the italic table to suit your printing needs.
Font
One of these fonts selected in the default setting is corresponding
to Others on the control panel. You can select the following fonts
directly on the control panel: Draft, Roman, Sans Serif, Courier,
Prestige and Script.