Specifications

1-28
Paper Handling
3. Follow the instructions in “Loading continuous paper with
the tractor” on page 1-9.
c
Caution:
❏
Printing on the edge of continuous forms with labels can
damage the print head.
❏
When loading continuous forms with labels, make sure the
left edge of the form is no further than 3 cm to the left of the
arrow mark (when facing the back of the printer).
To tear off and eject continuous forms with labels
Always tear off and eject continuous forms with labels by
following the procedure below.
Note:
When Overlapping Forms is turned on in the default-setting mode,
the Tear Off/Special Paper button is disabled and the Load/Eject
button only feeds forms forward.