Specifications

1-18
Paper Handling
Loading Single Sheets
Your printer can print on single sheets of paper from 90 to 420
mm (3.5 to 16.5 inches) wide. See “Single sheets” on page A-11 for
detailed single-sheet paper specifications.
You can load one sheet of paper at a time using the paper guide
or optional automatic sheet alignment unit. See “Automatic Sheet
Alignment Unit” on page 5-14 for more information on the
optional automatic sheet alignment unit. Also you can load a stack
of paper in the optional cut-sheet feeder. See “Cut-Sheet Feeder”
on page 5-5 for more information on the optional cut-sheet feeder.
Note:
If you load long paper (for example, legal size paper), leave enough space
at the back of the printer so that the paper is not obstructed.
Loading single sheets from the front
Follow these steps to load single sheets from the paper guide.
1. Make sure the paper guide is attached as described in the
Setup Guide. Then close the tractor unit sprocket covers
located on the back of your printer and push down the
sprocket lock levers to lock the sprockets in place.
2. Turn on the printer.