Specifications

A-12
Product Information
Continuous paper
See also “Multipart forms” on page A-14 for detailed information
on the specifications for continuous multipart forms.
❏
The sprocket hole must be a circle or notched circle.
❏
The holes must be cleanly cut.
❏
If the horizontal and vertical perforations are crossed, the
shaded area below should not be printed on. Uncrossed
perforations do not have this restricted area.
1. vertical perforation
2. horizontal perforation
1. crossed perforation
2. uncrossed perforation
A
B
28 mm (1.1 inches)
3 mm (0.12 inch)
A
B
B
A
1
2
12