Specifications

A-2
Product Information
❏
Place the printer on a flat surface. The printer will not operate
properly if it is tilted or placed at an angle.
❏
Do not block or cover the slots and openings in the printer’s
cabinet, and do not insert objects through the slots.
❏
Use only the type of power source indicated on the printer’s
label.
❏
Connect all equipment to properly grounded power outlets.
Avoid using outlets on the same circuit as photocopiers or air
control systems that regularly switch on and off.
❏
Do not use a damaged or frayed power cord.
❏
If you use an extension cord with the printer, make sure the
total ampere rating of all devices plugged into the extension
cord does not exceed the cord’s ampere rating. Also, make
sure the total ampere of all devices plugged into the wall
outlet does not exceed the wall outlet’s ampere rating.
❏
Unplug the printer before cleaning it, and always clean it with
a piece of damp cloth only.
❏
Replace fuses only with a fuse of the correct size and rating.
❏
Do not spill liquid onto the printer.
❏
Except as specifically explained in this guide, do not attempt
to service the printer yourself.
❏
Unplug the printer and refer servicing to qualified service
personnel under the following conditions:
i. If the power cord or plug is damaged.
ii. If liquid has entered the printer.
iii. If the printer has been dropped or the cabinet damaged.