WF-2630 User's Guide
Contents WF-2630 User's Guide............................................................................................................................... 13 Product Basics .......................................................................................................................................... Using the Control Panel ..................................................................................................................... Control Panel Buttons and Lights .......................
Using WPS to Connect to a Network ............................................................................................. Printing a Network Status Sheet......................................................................................................... Changing or Updating Network Connections ..................................................................................... Accessing the Web Config Utility .......................................................................................
Header/Footer Settings - Windows ........................................................................................... Selecting a Printing Preset - Windows........................................................................................... Selecting Extended Settings - Windows ........................................................................................ Extended Settings - Windows ...................................................................................................
Selecting a Scan Area - Office Mode ........................................................................................ 95 Available Image Adjustments - Office Mode ............................................................................. 98 Scanning in Professional Mode ..................................................................................................... 99 Available Document Source Settings - Professional Mode .....................................................
Creating a Contact .................................................................................................................. Editing or Deleting a Contact .................................................................................................. Creating a Contact Group ....................................................................................................... Editing or Deleting a Group ............................................................................................
Print Head Nozzle Check............................................................................................................. Checking the Nozzles Using the Product Control Panel ......................................................... Checking the Nozzles Using a Computer Utility ...................................................................... Print Head Cleaning ....................................................................................................................
Document Jams in the Automatic Document Feeder .................................................................. Paper Ejection Problems ............................................................................................................. Solving Problems Printing from a Computer..................................................................................... Nothing Prints ..........................................................................................................................
Ripple Patterns Appear in an Image ............................................................................................ 229 Scanned Image Colors Do Not Match Original Colors................................................................. 229 Scan Area is Not Adjustable in Thumbnail Preview ..................................................................... 230 Scanned Image Edges are Cropped ...........................................................................................
Software Notice................................................................................................................................ 251 Trademarks ...................................................................................................................................... 254 Copyright Notice............................................................................................................................... 254 libTIFF Software Acknowledgment...................................
WF-2630 User's Guide Welcome to the WF-2630 User's Guide. For a printable PDF copy of this guide, click here.
Product Basics See these sections to learn about the basic features of your product. Using the Control Panel Product Parts Locations Using Eco Mode and Other Power Saving Settings Epson Connect Solutions for Smartphones, Tablets, and More Using AirPrint Using Google Cloud Print Using the Control Panel See these sections to learn about the control panel and select control panel settings.
1 The 2 The 3 The 4 The 5 The LCD screen 6 The arrow buttons and the OK button 7 The 8 The numeric keypad 9 The Contacts button 10 The B&W button 11 The Color button power button and light home button Redial/Pause button Stop/Reset button back button Status Icons Parent topic: Using the Control Panel Status Icons Status icons may be displayed on the LCD screen depending on the product's status.
Icons Description Simple AP and Wi-Fi Direct modes are disabled An Eco Mode setting is enabled Parent topic: Control Panel Buttons and Lights Entering Characters on the LCD Screen Follow these guidelines to enter characters for passwords and other settings. • To enter letters or symbols, press the buttons on the numeric keypad repeatedly to scroll through characters. • To enter numbers or change the case of letters, press the up or down arrow button.
You see a screen like this: 2. Press the down arrow button, select Common Settings, and press the OK button. 3. Press the down arrow button, select Language, and press the OK button. 4. Select a language and press the OK button. Parent topic: Using the Control Panel Turning Off Control Panel Sounds You can turn off the sound heard when you press buttons on the control panel. 1. Press the home button, if necessary. 2. Press the up or down arrow button, select Setup, and press the OK button. 3.
You see a screen like this: 2. Press the down arrow button, select Common Settings, and press the OK button. 3. Select LCD Contrast and press the OK button. 4. Press the up or down arrow button to adjust the screen contrast. 5. Press the OK button to exit. Parent topic: Using the Control Panel Product Parts Locations See these sections to identify the parts on your product.
Product Parts - Top and Front 1 Edge guide 2 Sheet feeder 3 Paper support 4 Feeder guard 5 Output tray 19
1 ADF cover 2 Automatic Document Feeder (ADF) 3 ADF edge guide 4 ADF output tray 20
1 Document cover 2 Scanner glass 3 Control panel Parent topic: Product Parts Locations Product Parts - Inside 1 Scanner unit 2 Ink cartridge holder Parent topic: Product Parts Locations 21
Product Parts - Back 1 AC inlet 2 USB port 3 LINE port 4 EXT port Parent topic: Product Parts Locations Using Eco Mode and Other Power Saving Settings Your product enters sleep mode automatically and turns off the LCD screen if it is not used for a period of time. You can make the time period shorter and select other options to save energy and resources.
Note: The Sleep Timer setting in Eco Mode overrides the Sleep Timer setting in Common Settings. This setting can be locked by an administrator. If you cannot access or change this setting, contact your administrator for assistance. 1. Press the up or down arrow button, select Eco Mode, and press the OK button. You see a screen like this: 2. Select On and press the OK button. 3. Press the up arrow button. 4. Change settings as necessary. 5. Press the OK button to exit.
You see a screen like this: 4. Use the numeric keypad to enter the number of minutes. 5. Press the left or right arrow buttons to move the cursor as necessary. 6. Press the OK button. Parent topic: Using Eco Mode and Other Power Saving Settings Changing the Power Off Timer Settings You can have the product turn off automatically if it is not used for a specified period of time. Note: This setting can be locked by an administrator.
3. Press the down arrow button, select Power Off Timer, and press the OK button. 4. Select a time period between 30minutes and 12h (12 hours), and press the OK button. Parent topic: Using Eco Mode and Other Power Saving Settings Epson Connect Solutions for Smartphones, Tablets, and More You can print documents, photos, emails, and web pages from your home, office, or even across the globe. You can use your smartphone, tablet, or computer.
Using the Epson iPrint Mobile App Use this free Apple and Android app to print to nearby Epson networked products. The Epson iPrint Mobile App lets you print PDFs, Microsoft Office documents, photos, and web pages over a wireless network. You can even scan and save a file on your device, send it as an email, or upload it to an online service such as Box, Dropbox, Evernote, or Google Drive. 1. Set up your product on a network as described in this manual. See the link below. 2. Visit epson.
1. Set up your product for network scanning as described in this manual. See the link below. 2. Visit epson.com/connect for instructions on registering an account and your product with Epson Connect. 3. After registering, sign in to the Epson Connect web page with the email address and password you selected. 4. Select Destination List for Scan to Cloud. 5. Click Add, then follow the instructions on the screen to create your destination list. 6.
Using Google Cloud Print With a Google Account, you can print from your Apple or Android device to your Epson product. You can also print from Chromebooks and the Google Chrome browser without drivers or cables. Set up your Epson product for network printing as described in this manual. See the link below. Note: Make sure your Epson printer and computer are connected to the same network before starting the Google Cloud Print setup. 1. Connect your device to the same network that your Epson product is using.
Wi-Fi Networking See these sections to use your product on a Wi-Fi network. Wi-Fi Infrastructure Mode Setup Wi-Fi Direct Mode Setup Wi-Fi Protected Setup (WPS) Printing a Network Status Sheet Changing or Updating Network Connections Wi-Fi Infrastructure Mode Setup You can set up your product to communicate with your computer using a wireless router or access point. The wireless router or access point can be connected to your computer over a wireless or wired network.
3 Computer with a wireless interface 4 Computer 5 Internet 6 Ethernet cable (used only for wired connection to the wireless router or access point) Selecting Wireless Network Settings From the Control Panel Parent topic: Wi-Fi Networking Selecting Wireless Network Settings From the Control Panel You can select or change wireless network settings using your product control panel.
4. Enter your wireless password using the numeric keypad. Note: The network name and password are case sensitive. Be sure to correctly enter uppercase and lowercase letters, and numeric or special characters. • To enter letters or symbols, press the buttons on the numeric keypad to scroll through characters. • To enter numbers or change the case of letters, press the up or down arrow button. • To delete the previous character, press the left arrow button. • To enter a space, press the right arrow button.
Wi-Fi Direct Mode Setup You can set up your product to communicate directly with your computer or another device without requiring a wireless router or access point. 1 Epson product 2 Computer with a wireless interface 3 Other wireless device You can select one of these modes to communicate with your computer or device: Access point mode The product itself acts as the network access point for up to 4 devices.
Enabling Wi-Fi Direct Mode You can enable Wi-Fi Direct mode to allow direct communication between your product and a computer or other devices without a wireless router or access point. 1. Press the up or down arrow button, select Wi-Fi Setup, and press the OK button. You see this screen: 2. Press the down arrow button, select Wi-Fi Direct Setup, and press the OK button. 3. Press the down arrow button, select Connection Setup, and press the OK button. 4.
6. Enter a Wi-Fi Direct password using the numeric keypad. Note: Your password must be at least 8 and no more than 22 characters long. • To enter letters or symbols, press the buttons on the numeric keypad repeatedly to scroll through characters. • To enter numbers or change the case of letters, press the up or down arrow button. • To delete the previous character, press the left arrow button. • To enter a space, press the right arrow button. 7.
You see the connection symbol on the LCD screen and should be able to print directly to your product from your computer or device. Note: If the connection symbol is not displayed on the LCD screen, Wi-Fi Direct mode is not enabled. Repeat these steps to try again.
2. Press the down arrow button, select Push Button Setup (WPS), and press the OK button. 3. Follow the instructions on the LCD screen to complete WPS setup. 4. Press the back button to return to the Home screen. If the network connection is successful, the LCD screen.
You see a screen like this: 5. Press the up arrow button to print the network status sheet. Examine the settings shown on the network status sheet to diagnose any problems you have. Parent topic: Wi-Fi Networking Changing or Updating Network Connections See these sections to change or update how your product connects to a network.
Parent topic: Changing or Updating Network Connections Related tasks Printing a Network Status Sheet Changing a USB Connection to a Wi-Fi Connection If you have already connected your product to your computer using a USB connection, you can change to a Wi-Fi connection or add a Wi-Fi connection to print wirelessly. 1. Do one of the following: • If you want to use only a Wi-Fi connection, disconnect the USB cable from your product. With Windows, also uninstall your product software.
Disabling Wi-Fi Features You may need to disable your product's Wi-Fi features if you change your network connection type or need to solve a problem with your network connection. Note: Before disabling Wi-Fi features, make a note of your product's SSID (network name) and password, and any network settings selected for the Epson Connect services you may use. 1. Press the up or down arrow button, select Wi-Fi Setup, and press the OK button. You see this screen: 2.
Loading Paper Before you print, load paper for the type of printing you will do. Loading Paper for Documents Paper Loading Capacity Available Epson Papers Borderless Paper Type Compatibility Paper or Media Type Settings Selecting the Paper Settings - Control Panel Loading Paper for Documents You can print documents on a variety of paper types and sizes. 1. Flip the feeder guard forward. 2. Raise the paper support and its extension, pull out the output tray, then raise the paper stopper.
3. Slide the edge guide to the left. 4. Insert paper, glossy or printable side up and short edge first, against the right side. If you are inserting a stack of paper, fan the sheets first and tap the stack on a flat surface to even the edges.
5. Slide the edge guide against the paper, but not too tightly. 6. Flip the feeder guard back. Always follow these paper loading guidelines: • Load only the recommended number of sheets. • Load paper short edge first, no matter which way your document faces. • Load letterhead or pre-printed paper top edge first. • Do not load paper above the arrow mark inside the edge guide. • Check the paper package for any additional loading instructions.
Paper type Loading capacity Epson Bright White Paper ** 80 sheets Epson Presentation Paper Matte - Letter (8.5 × 11 inches [216 × 279 mm]) Epson Photo Paper Glossy 20 sheets Epson Premium Photo Paper Glossy Epson Premium Photo Paper Semi-gloss Plain paper - Legal (8.5 × 14 inches [216 × 356 mm]) Epson Presentation Paper Matte - Legal (8.
Paper Type Size Part number Sheet count Epson Bright White Paper Letter (8.5 × 11 inches [216 × 279 mm]) S041586 500 Epson Brochure & Flyer Paper Matte Double-sided Letter (8.5 × 11 inches [216 × 279 mm]) S042384 150 Epson Ultra Premium Presentation Letter (8.5 × 11 inches Paper Matte [216 × 279 mm]) S041341 50 Epson Premium Presentation Paper Matte 8 × 10 inches (203 × 254 mm) S041467 50 Letter (8.
Paper Type Size Part number Sheet count Epson Premium Photo Paper Glossy 4 × 6 inches (102 × 152 mm) S041808 40 S041727 100 5 × 7 inches (127 × 178 mm) S041464 20 8 × 10 inches (203 × 254 mm) S041465 20 Letter (8.5 × 11 inches [216 × 279 mm]) S042183 25 S041667 50 S041809 50 S042038 100 S041141 20 S041649 50 S041271 100 Epson Photo Paper Glossy 4 × 6 inches (102 × 152 mm) Letter (8.
• 5 × 7 inches (127 × 178 mm) • 8 × 10 inches (203 × 254 mm) • Letter (8.5 × 11 inches [216 × 279 mm]) • A4 (8.3 × 11.
Selecting the Paper Settings - Control Panel You can change the default paper size and paper type using the control panel on the product. 1. Press the up or down arrow button, select Setup, and press the OK button. 2. Select Paper Setup and press the OK button. 3. Press the OK button again. 4. Select the paper size you loaded and press the OK button. 5. Select the paper type you loaded and press the OK button. 6. Press the back button. 7.
Selecting Universal Print Settings You can change the default universal print settings using the product control panel. 1. Press the up or down arrow buttons, select Setup, and press the OK button. You see this screen: 2. Press the down arrow button, select Universal Print Settings, and press the OK button. You see this screen: 3. Adjust the settings as necessary. 4. When you are finished, press the back button to return to the Home screen.
Universal Print Settings option Available settings Description Top Offset — Adjusts the top or left margin. On Select On to skip blank pages automatically.
Placing Originals on the Product Follow the instructions here to place your original documents or photos on the product. Caution: Do not place anything on top of your product or use its cover as a writing surface to avoid damaging it. Placing Originals on the Scanner Glass Placing Originals in the Automatic Document Feeder Placing Originals on the Scanner Glass You can place originals up to this size on the scanner glass: Letter (8.5 × 11 inches [216 × 279 mm]) or A4 (8.3 × 11.7 inches [210 × 297 mm]). 1.
Related topics Copying Scanning Faxing Placing Originals in the Automatic Document Feeder You can place multi-page original documents in the Automatic Document Feeder (ADF).You can also use the ADF to scan both sides of a 2-sided document. Make sure the originals meet the Automatic Document Feeder specifications before loading them. Caution: Make sure your originals are not creased or folded, and do not contain holes, staples, tape, or other materials that could obstruct the feeder. 1.
2. Fan your stack of originals and tap them gently on a flat surface to even the edges. 3. Insert the originals into the ADF faceup and top-edge first. The ADF icon on the LCD screen appears.
4. Slide the ADF edge guide against the originals, but not too tightly.
Copying See the information here to copy documents or photos using your product. Note: Copies may not be exactly the same size as your originals. Copying Documents or Photos Paper Size Settings - Copying Copying Options Copying Documents or Photos You can copy documents or photos onto various sizes and types of paper, including Epson special papers. 1. Place your original document or photo on the scanner glass, or place multi-page documents in the ADF. 2. Load the paper you want to print on. 3.
7. When you are ready to copy, press one of the Start buttons. Note: To cancel printing, press the Stop/Reset button or select Cancel. Parent topic: Copying Related references Paper Loading Capacity Available Epson Papers Paper Size Settings - Copying Copying Options Related topics Loading Paper Placing Originals on the Product Paper Size Settings - Copying Select the Paper Size setting that matches the paper you loaded.
Copying option Available settings Description Layout With Border Leaves a small margin around the image or document Borderless Expands the image to the edge of the paper (slight cropping may occur) 2-up Copies multiple page documents onto one sheet. After selecting either one of these options, select Settings and change the Document Orientation setting if necessary.
Printing from a Computer Before printing from your computer, make sure you have set up your product and installed its software as described on the Start Here sheet. Note: If you have an Internet connection, it is a good idea to check for updates to your product software on Epson's support website. If you see a Software Update screen, select Enable automatic checking and click OK. The update scans your system to see if you have the latest product software. Follow the on-screen instructions.
3. If necessary, select your product name as the printer you want to use. Note: You may also need to select Properties or Preferences to view your print settings. You see the Main tab of your printer settings window: 4. Select the size of the paper you loaded as the Document Size setting. 5. If you are printing a borderless photo, select Borderless. You can click Settings to access additional options for borderless printing.
7. Select the type of paper you loaded as the Paper Type setting. Note: The setting may not exactly match the name of your paper. Check the paper type settings list for details. 8. Select the Quality setting that matches the print quality you want to use. 9. Select a Color option: • To print a color document or photo, select the Color setting. • To print text and graphics in black or shades of gray, select the Black/Grayscale setting. 10.
Standard For everyday text and image printing. High For photos and graphics with high print quality. More Settings Opens a window that lets you choose among levels of speed and quality. Parent topic: Selecting Basic Print Settings - Windows Multi-Page Printing Options - Windows You can select any of the available options in the Multi-Page menu to set up your multi-page print job. 2-Up and 4-Up Prints 2 or 4 pages on one sheet of paper. Click the Page Order button to select page layout and border options.
Selecting Additional Layout and Print Options - Windows You can select a variety of additional layout and printing options for your document or photo on the More Options tab. 1. To change the size of your printed document or photo, select the Reduce/Enlarge Document checkbox and select one of these sizing options: • Select the Fit to Page option to size your image to fit the paper you loaded.
• Select Custom and click the Advanced button to manually adjust the color correction settings or turn off color management in your printer software. • Select Image Options to access additional settings for improving printed images. Note: You can also select Color Universal Print settings. 3. To add the following features, click the Watermark Features button: • Watermark: adds a visible watermark to your printout.
Custom Color Correction Options - Windows You can select any of the available options in the Color Correction window to customize the image colors for your print job. Color Controls Lets you select a Color Mode setting, individual settings for Brightness, Contrast, Saturation, and Density, and individual color tones. Depending on the selected color mode, you can also adjust the midtone density using the Gamma setting. Fix Photo Improves the color, contrast, and sharpness of flawed photos.
ICM Lets you manage color using installed color printing profiles. No Color Adjustment Turns off color management in your printer software so you can manage color using only your application software. Parent topic: Selecting Additional Layout and Print Options - Windows Image Options and Additional Settings - Windows You can select any of the Image Options and Additional Settings to customize your print. Some options may be pre-selected or unavailable, depending on other settings you have chosen.
Mirror Image Flips the printed image left to right. Parent topic: Selecting Additional Layout and Print Options - Windows Header/Footer Settings - Windows You can select any of the Header/Footer Settings options to add headers or footers when you print. The items are available to print at the top or bottom of your pages, in either the left, right, or center of the page. Note: These settings are not saved with your document.
Selecting a Printing Preset - Windows For quick access to common groups of print settings, you can select a printing preset on the Main or More Options tab. Note: You can create your own preset by clicking the Add/Remove Presets button. 1. Click the Main or More Options tab.
2. Place your cursor over one of the Printing Presets to view its list of settings. 3. Click on a preset to change its settings, or use any of the available options on the screen to control your printing presets. 4. To choose a preset for printing, select it. 5. Click OK. Parent topic: Printing with Windows Selecting Extended Settings - Windows You can select additional settings that apply to all the print jobs you send to your product. 1.
4. Click the Extended Settings button. You see this window: 5. Select any of the extended settings to customize your print. 6. Click OK to close the Extended Settings window. 7. Click OK to close the printer software window. Extended Settings - Windows Parent topic: Printing with Windows Extended Settings - Windows You can select from these settings on the Extended Settings window. Enable EPSON Status Monitor 3 Enables product monitoring for ink and paper supplies and other issues.
Print as Bitmap Increases print speed when printing is extremely slow or the print head stops during printing, and other settings do not help. Skip Blank Page Ensures that your product does not print pages that contain no text or images. Change Standard Resolution Reduces the resolution of print data to correct printing problems. Refine screening pattern Prints graphics with a finer screening pattern. Allow Applications to Perform ICM Color Matching Allows applications to perform ICM color matching.
You see your application's Print window, such as this one: 2. Click OK or Print to start printing. Checking Print Status - Windows Parent topic: Printing with Windows Checking Print Status - Windows During printing, you see this window showing the progress of your print job. It allows you to control printing and check ink cartridge status. • To cancel printing, click Cancel. • To see print jobs lined up for printing, click Print Queue. • To check ink status, click Show Ink Levels.
Selecting Default Print Settings - Windows When you change your print settings in a program, the changes apply only while you are printing in that program session. If you want to change the print settings you use in all your Windows programs, you can select new default print settings. 1. Access the Windows Desktop and right-click the product icon in the Windows taskbar. 2. Select Printer Settings. You see the printer settings window: 3.
Parent topic: Printing with Windows Changing the Language of the Printer Software Screens You can change the language used on the Windows printer software screens. 1. Access the Windows Desktop and right-click the product icon in the Windows taskbar. 2. Select Printer Settings. You see the printer settings window. 3. Click the Maintenance tab. You see the maintenance options: 4. Select the language you want to use as the Language setting. 5. Click OK to close the printer software window.
Parent topic: Selecting Default Print Settings - Windows Changing Automatic Update Options Your printer software for Windows automatically checks for updates to the product software. You can change how often the software checks for updates or disable this feature. 1. Access the Windows Desktop and right-click the product icon in the Windows taskbar. 2. Select Software Update Settings. You see this window: 3.
Printing with OS X You can print with your product using any OS X printing program, as described in these sections. Note: If you have an Internet connection, it is a good idea to check for updates to your product software on Epson's support website.
You see the expanded printer settings window for your product: Note: The print window may look different, depending on the version of OS X and the application you are using. 5. Select the Copies and Pages settings as necessary. Note: If you do not see these settings in the print window, check for them in your application before printing.
6. Select the page setup options: Paper Size and Orientation. Note: If you do not see these settings in the print window, check for them in your application before printing. They may be accessible by selecting Page Setup from the File menu. 7. Select any application-specific settings that appear on the screen, such as those shown in the image above for the Preview application. 8. Select Print Settings from the pop-up menu.
9. Select the type of paper you loaded as the Media Type setting. Note: The setting may not exactly match the name of your paper. Check the paper type settings list for details. 10. Select the Print Quality setting you want to use. 11. Select any of the available print options.
Grayscale Prints text and graphics in black or shades of gray. Mirror Image Lets you flip the printed image horizontally. Note: If you select the Min option for the Expansion setting, you may see white borders on your printed photo. Parent topic: Selecting Basic Print Settings - OS X Selecting Page Setup Settings - OS X Depending on your application, you may be able to select the paper size and orientation settings from the print window.
Parent topic: Printing with OS X Selecting Print Layout Options - OS X You can select a variety of layout options for your document or photo by selecting Layout from the popup menu on the print window. • To print multiple pages on one sheet of paper, select the number of pages in the Pages per Sheet pop-up menu. To arrange the print order of the pages, select a Layout Direction setting. • To print borders around each page on the sheet, select a line setting from the Border pop-up menu.
1. Select Color Matching from the pop-up menu in the print window. 2. Select one of the available options. 3. Select Color Options from the pop-up menu in the print window. Note: The available settings on the Color Options menu depend on the option you selected on the Color Matching menu. 4. Select one of the available options.
Color Matching Settings EPSON Color Controls Lets you manage color using controls in your printer software or turn off color management. ColorSync Prints using standard color profiles for your product and paper to help match image colors. You can customize the conversion method and filter settings on the ColorSync pop-up menu in the print window. Color Options Settings Manual Settings Lets you select manual color adjustments.
You see a screen like this: 4. Select any of the available printing preferences. 5. Click OK. Printing Preferences - OS X Parent topic: Printing with OS X Printing Preferences - OS X You can select from these settings on the Options or Driver tab. Skip Blank Page Ensures that your product does not print pages that contain no text or images. Quiet Mode Lessens noise during printing but may decrease print speed. Permit temporary black printing Allows you to print using black ink when color ink is expended.
Warning Notifications Lets you choose whether or not to receive warning notifications from the printer software for various operating conditions. Establish bidirectional communication Allows the product to communicate with the computer. Do not change the default setting unless you experience issues when using a shared printing pool. Parent topic: Selecting Printing Preferences - OS X Printing Your Document or Photo - OS X Once you have selected your print settings, you are ready to print.
You see the print status window: 2. Select the following options as necessary: OS X 10.6/10.7: • To cancel printing, click the print job and click the Delete icon. • To pause a print job, click the print job and click the Hold icon. To resume a print job, click the print job marked "Hold" and click the Resume icon. • To pause printing for all queued print jobs, click the Pause Printer icon. • To check ink status, click the Supply Levels icon. OS X 10.8/10.
Scanning You can scan original documents or photos and save them as digital files. Starting a Scan Selecting Epson Scan Settings Scanning with OS X Using Image Capture Starting a Scan After placing your original documents or photos on your product for scanning, start scanning using one of these methods.
The scan options are displayed: 3. Press the up or down arrow buttons to select a scan option and press the OK button. • Cloud sends your scanned files to a destination that you have registered with Epson Connect. • Computer saves your scan as a JPEG file to your computer or as an image capture in OS X. • Computer (WSD) lets you manage network scanning in Windows 7 or Windows Vista (English only).
Changing Default Scan Button Settings You can view or change the default scan settings your product uses when you scan to your computer using the product buttons. You do this using the Event Manager program. 1. Do one of the following to open Event Manager: • Windows 8.x: Navigate to the Apps screen and select Event Manager. • Windows (other versions): Click > Event Manager.
scanning software. To download Epson Scan, visit Epson's driver download site (U.S. downloads or Canadian downloads).
Related tasks Scanning with OS X Using Image Capture Related topics Selecting Epson Scan Settings Placing Originals on the Product Starting a Scan from a Scanning Program You can start Epson Scan from a scanning program to select scan settings, scan, and open the scanned image in the program. Note: With OS X, in addition to scanning with Image Capture, you can download and install Epson Scan scanning software.
You see an Epson Scan window like this: Note: Epson Scan may start in a different mode when you first access it.
Related topics Placing Originals on the Product Selecting Epson Scan Settings After starting Epson Scan, you can select settings in various modes to customize your scan. Scan Modes Selecting the Scan Mode Scanning in Office Mode Scanning in Professional Mode Image Preview Guidelines Scan Resolution Guidelines Selecting Scan File Settings Parent topic: Scanning Scan Modes Epson Scan provides a choice of scan modes with different levels of control over your settings.
Parent topic: Selecting Epson Scan Settings Scanning in Office Mode When you scan in Office Mode, Epson Scan automatically saves your scanned file in PDF format in your operating system's Documents or My Documents folder, or opens it in your scanning program. You can select settings, preview, and change the scanned file settings as necessary. 1. Start Epson Scan and select Office Mode as the Mode setting.
You see this window: 2. Select the Document Source setting indicating where you placed your original. 3. Select the Size and Orientation settings that match your original.
4. To allow Epson Scan to detect and correct any skew in your original, select Correct Document Skew. 5. To rotate your original in your scan, select a Rotate setting. 6. Select the Image Type setting that matches your original. 7. Select the Resolution setting you want to use for your scan. 8. Click the Preview button. Epson Scan previews your original and displays the result in a separate Preview window. 9. If you are using the ADF, reinsert your original into the ADF. 10.
ADF Selects the Automatic Document Feeder as the location where the originals are placed on your product for scanning. Auto Detect Automatically detects where the originals are placed on your product for scanning. Parent topic: Scanning in Office Mode Selecting a Scan Area - Office Mode You can select a specific area in your preview image to include in your scanned image. You can select the entire image area or a portion of it.
1. In the Preview window, click the preview image. Auto Locate icon to create a marquee (dotted line) on the 2. Do the following, as necessary, to work with the selected scan area: • If the marquee is correct, continue with the next step. • To move the marquee, click inside the scan area and drag the marquee where you want it.
• To resize the scan area, place your cursor over the edge or corner of the marquee, then click and drag the edges where you want them. (Hold down the Shift key as you resize the marquee to retain the same width/height proportions.) • To create additional marquees (up to 50, if available), click the existing marquee and paste it on the preview image. Copy Marquee icon to copy the Note: If you draw multiple marquees, make sure you select the All button in the Preview window before you scan.
Available Image Adjustments - Office Mode You can select these Image Adjustments options in Epson Scan Office Mode. Not all adjustment settings may be available, depending on other settings you have chosen. Note: Select the Image Option checkbox if you need to set any of the grayed-out image adjustments beneath the checkbox. Not all adjustment settings may be available, depending on the Image Type setting. Unsharp Mask Makes the edges of certain image areas clearer.
Skip Blank Pages Ensures that your product does not scan pages that contain no text or images. Edge Fill Corrects shadowing around the edges of the image by filling the shadows with the color you select. Brightness Adjusts the overall lightness and darkness of the scanned image. Contrast Adjusts the difference between the light and dark areas of the overall scanned image.
You see this window: 100
2. Select the Document Type setting that matches your original, such as Reflective for documents or photos. 3. Select the Document Source setting indicating where you placed your original. Note: If you are using the ADF, remove any documents from the scanner glass. 4. Select the specific type of original you are scanning as the Auto Exposure Type setting: Document or Photo. 5. Select the details of your original and how you want it scanned as the Image Type setting. 6.
Scan Resolution Guidelines Related tasks Selecting Scan File Settings Scanning in Office Mode Available Document Source Settings - Professional Mode You can select these Document Source options in Epson Scan Professional Mode. Scanner Glass Selects the scanner glass as the location where the originals are placed on your product for scanning. ADF Selects the Automatic Document Feeder as the location where the originals are placed on your product for scanning.
1. Do one of the following to select your scan area in the Preview image: • Normal preview: Click the image.
• Thumbnail preview: Your scan area is selected automatically, but you can change it. Place your cursor in one corner of the desired scan area, then click and drag the cursor to the opposite corner to create a marquee (dotted line) on the preview image. 2. Do the following, as necessary, to work with the selected scan area: • If the marquee is correct, continue with the next step. • To move the marquee, click inside the scan area and drag the marquee where you want it.
• To resize the scan area, place your cursor over the edge or corner of the marquee, then click and drag the edges where you want them. (Hold down the Shift key as you resize the marquee to retain the same width/height proportions.) • Normal preview: To create additional marquees (up to 50, if available), click the Marquee icon to copy the existing marquee and paste it on the preview image. • To delete a marquee, click the marquee, then click the Copy Delete Marquee icon.
Click the image adjustment icon to access additional settings. Click the + (Windows) or (OS X) icon next to a setting to change the level of adjustment. Unsharp Mask Makes the edges of certain image areas clearer. Turn off this option to leave softer edges. Descreening Removes the ripple pattern that might appear in subtly shaded image areas, such as skin tones. This option improves results when scanning magazines or newspapers.
Saturation Adjusts the density of colors in the overall image. Color Balance Adjusts the balance of colors in the overall image. Color Palette Provides a graphical interface for adjusting mid-tone levels, such as skin tones, without affecting the highlight and shadow areas of the image. (For advanced users only.) Click the to access the settings.
A marquee (dotted line) appears on your preview image proportioned for the size you selected. 3. Do the following, as necessary, to work with the selected scan area: • To move the marquee, click inside the scan area and drag the marquee where you want it. • To resize the scan area, place your cursor over the edge or corner of the marquee, then click and drag the edge where you want it. Note: Manually adjusting the marquee will not change the target size of the scanned file.
4. To create a scanned image size that is not available in the Target Size list, click the Customize option. You see this window: 5. Name the custom size, enter the size, click Save, and click OK. Then adjust the marquee on the preview image. The marquee is automatically proportioned for your custom scan size.
6. To use additional sizing tools, click the + (Windows) or and select options as desired. (OS X) icon next to the Target Size setting • Scale: Reduces or enlarges your image by the percentage you enter. • Trimming: Turns automatic image cropping on or off. • Unlock icon: Unlocks the width/height proportions of the scanned image size so you can adjust it without constraint.
• You will scan the image at its original size but enlarge it later in an image-editing program. Increase Epson Scan's Resolution setting in your scan. Increase the resolution by the same amount you will increase the image size to retain a high image quality. For example, if the resolution is 300 dpi (dots per inch) and you will double the image size later, change the Resolution setting to 600 dpi. • You will scan the image at 100% or smaller size.
Selecting Scan File Settings You can select the location, name, and format of your scan file on the File Save Settings window. You can also select various optional settings that control how Epson Scan behaves when you scan and save files. The File Save Settings window may appear after you click Scan on the Epson Scan window. You may also be able to access the window by clicking the icon on the Epson Scan window. 1.
• Click the Other button, click the Browse or Choose button, and select a folder. 2. If you want to change the default name for your scanned image, click Edit and select the options you want. 3. Select the file format you want to use in the Image Format Type menu. 4. If your file format provides optional settings, click the Options button to select them. 5. Choose any of the optional settings you want to use by selecting their checkboxes. 6. Click OK.
• If you need to delete or reorder the scanned pages, click Edit page. Delete or reorder the pages using the icons that appear on the bottom of the editing window. When you are finished, click OK. Note: If you installed an OCR (Optical Character Recognition) program, you may see a screen indicating the program is converting your page to text. Wait until the program re-scans the page and close the program, if necessary.
Show this dialog box before next scan Select to have the File Save Settings window appear automatically before you scan (in certain Epson Scan modes). Open image folder after scanning Select to have Windows Explorer or OS X Finder automatically open to the folder where your scanned image is saved after scanning.
4. Select the Scan Mode setting indicating where you placed your original (if available). Select any other available scan settings as necessary. 5. Select the folder in which you want to save your scanned file in the Scan To pop-up menu. 6. Click Scan.
Your scanned file is saved in the folder you selected. Available Scan Settings - OS X Image Capture Parent topic: Scanning Related topics Placing Originals on the Product Available Scan Settings - OS X Image Capture You can select these scan settings in your imaging editing application for OS X, if available. Image Correction Provides a graphical interface for adjusting brightness, tint, temperature, and saturation. Unsharp Mask Makes the edges of certain image areas clearer.
Faxing See these sections to fax using your product. Note: This product allows you to store names, telephone numbers, and fax data in its memory even when the power is turned off. Make sure you restore all of the default settings if you give away or dispose of the product. This will erase all of your network settings and fax data.
1. Connect a phone cable to your telephone wall jack and to the LINE port on your product. Note: If you have a DSL or ISDN connection, you must connect the appropriate DSL filter, or ISDN terminal adapter or router to the wall jack to be able to use the line for faxing or voice calls using your product. Contact your DSL or ISDN provider for the necessary equipment.
ISDN connection 1 ISDN wall jack 2 Terminal adapter or ISDN router 120
2. If you are connecting a telephone or answering machine to your product using a second phone cable, remove the cap from the EXT port on your product.
3. Connect a second phone cable to your telephone or answering machine and to the EXT port on your product. Note: If you connect an answering machine and Receive Mode is set to Auto, set the number of rings before your product answers a call to a number that is higher than your answering machine's setting for the number of rings. Any phone or answering machine must be connected to the EXT port for your product to detect an incoming fax call when the phone is picked up.
Setting Up Fax Features Before faxing with your product, set up your fax header and select the fax features you want to use. Note: If you leave your product unplugged for a long period of time, you may need to reset the date and time settings for faxes.
Note: If you change the country or region, your fax settings return to their defaults and you must select them again. This setting can be locked by an administrator. If you cannot access or change this setting, contact your administrator for assistance. 1. Press the home button, if necessary. 2. Press the up or down arrow button, select Setup, and press the OK button. 3. Select Common Settings and press the OK button. You see this screen: 4. Select Country/Region and press the OK button. 5.
You see a screen like this: 5. Select the date format you want to use. 6. Use the numeric keypad to enter the current date and press the OK button . 7. Select the time format you want to use and press the OK button. 8. Use the numeric keypad to enter the current time and press the OK button. 9. Select Date/Time Settings and press the down arrow button. 10. Select Daylight Saving Time and press the OK button. 11.
2. Press the up or down arrow button, select Setup, and press the OK button. 3. Select Fax Settings and press the OK button. You see this screen: 4. Select Fax Setting Wizard and press the OK button. 5. Press the up arrow button to start setting up your fax settings. 6. Use the numeric keypad to enter the sender name for your fax source, such as your name or a business name. You can enter up to 40 characters. Press the OK button when you are done. 7.
• If you did not connect an external telephone or answering machine, press the down arrow button and go to step 11. 10. Do one of the following: • If you connected an external telephone or answering machine to the product's EXT port, press the up arrow button to receive faxes manually or press the down arrow to receive them automatically. Note: If you have connected an external answering machine and selected to receive faxes automatically, make sure the Rings to Answer setting is correct.
Selecting the Line Type If you connect the product to a PBX (Private Branch Exchange) phone system or terminal adapter, you must change the product's line type. PBX is used in office environments where an external access code such as “9” must be dialed to call an outside line. The default Line Type setting is PSTN (Public Switched Telephone Network), which is a standard phone line, similar to the one in your home. Note: This setting can be locked by an administrator.
You see this screen: 7. Select Use and press the OK button. 8. To select an access code number (9 for example), use the numeric keypad to enter the code number and press the OK button. Parent topic: Setting Up Fax Features Using the Product Control Panel Setting the Number of Rings to Answer If you connect an external answering machine and select to receive faxes automatically, make sure the Rings to Answer setting is correct.
6. Select the number of rings and press the OK button. Make sure to select a number higher than the number of rings your answering machine is set to for answering a call. Note: The answering machine picks up every call faster than the product, but the product can detect fax tones and start receiving faxes. If you answer the phone and hear a fax tone, check that the product has started receiving the fax, then hang up.
Setting Options Description Fax Speed Fast(33,600bps) Sets the speed at which you transmit and receive faxes. Medium(14,400bps) Slow(9,600bps) ECM Dial Tone Detection Line Type Header On Turns on Error Correction Mode (ECM) to automatically correct errors in sent or received fax data. Off Turns off Error Correction Mode (ECM)—color faxes cannot be sent or received. On Automatically dials the number you enter for faxing when the product detects a dial tone.
Setting Options Description Distinctive Ring All If you are using a Distinctive Ring Service on your phone line, your telephone company can assign two or more phone numbers to the same line and assign different ring patterns to each. If you use this service, select the number of rings for your fax number so your product can receive faxes on the correct number of rings. All works for phone lines that do not use this service.
Printing Fax Reports You can select from several fax reports to print whenever necessary. You can also have the fax log printed automatically by selecting Setup > Fax Settings > Output Settings > Fax Log Auto Print. 1. Press the home button, if necessary. 2. Press the up or down arrow button, select Fax, and press the OK button. 3. Press the OK button. You see a screen like this: 4. Select Fax Report, select the report you want to print, and press one of the Start buttons.
Setting Up Fax Features Using the Fax Utility - Windows You can set up your fax header and select your fax settings using the FAX Utility for Windows. 1. Do one of the following: • Windows 8.x: Navigate to the Apps screen. • Windows (other versions): Click or Start > Programs or All Programs > EPSON Software. 2. Select FAX Utility. You see this window: 3. Select Fax Settings for Printer. (Select your product, if prompted.
You see this window: 4. Select Fax Settings. 5. Follow the prompts that appear on the screen to enter your fax header information and select your fax settings. Note: For detailed information, select the FAX Utility Help option. Parent topic: Setting Up Fax Features Related topics Setting Up Fax Features Using the Product Control Panel Setting Up Fax Features Using the Fax Utility - OS X You can set up your fax header and select your fax settings using the FAX Utility for OS X. 1.
2. Double-click FAX Utility, if necessary. You see this window: 3. Select your FAX product in the Printer list. 4. Select Fax Settings. 5. Follow the prompts that appear on the screen to enter your fax header information and select your fax settings. Note: For detailed information, select the FAX Utility ? icon.
Parent topic: Faxing Setting Up Contacts Using the Product Control Panel You can set up your contacts and contact groups using the control panel on your product.
You see a screen like this: 4. Press the # button on the numeric keypad. You see a screen like this: Note: You can print your list of contacts and groups if necessary. 5. Select Add Entry and press the OK button. 6. Use the buttons on the numeric keypad to enter the number you want to use for the contact, such as 1. Then press the OK button.
You see a screen like this: 7. Use the buttons on the numeric keypad to enter the contact name (up to 30 characters), and press the OK button. 8. Use the buttons on the numeric keypad to enter the fax number (up to 64 characters). Note: If necessary, enter an outside line access code (such as 9) at the beginning of the fax number. If the access code has been set up in the Line Type setting, enter the # pound sign instead of the code. 9. Set the Fax Speed if necessary. 10. Press the OK button.
You see a screen like this: 3. Press the Contacts button. 4. Select the contact you want to edit or delete, and press the left arrow button. You see a screen like this: 5. Do one of the following: • To delete the contact, select Delete and press the up arrow button on the confirmation screen. • To edit the contact, select Edit, follow the on-screen instructions.
2. Press the up or down arrow button, select Fax, and press the OK button. You see a screen like this: 3. Press the Contacts button. 4. Press the # button on the numeric keypad. You see a screen like this: Note: You can print your list of contacts and groups if necessary. 5. Select Add Group and press the OK button.
You see a screen like this: 6. Select the number you want to use for the group, such as 1. Then press the OK button. 7. Use the numeric keypad to enter the group name (up to 30 characters), and press the OK button. You see your contacts list. 8. Press the * button on the numeric keypad for each contact you want to include in your group. A * symbol appears next to each selected contact. 9. Press the OK button to save the group.
3. Press the Contacts button. You see a screen like this: 4. Select the group you want to edit and press the right arrow button. You see a screen like this: 5. Do one of the following: • To delete the group, press the down arrow button, select Delete, and press the OK button. • To edit the group, select Edit and press the OK button. Edit the group as necessary and press the OK button. You see a list of the contacts in your group. 6. To add or delete a contact, press the * button on the numeric keypad.
Setting Up Speed/Group Dial Lists Using the Fax Utility - Windows You can set up your speed dial and group dial lists using the FAX Utility for Windows. The utility also lets you import fax numbers from the Windows Address Book and back up fax numbers stored in your product's memory. Note: You can create up to 60 speed dial and group dial entries combined. 1. Do one of the following: • Windows 8.x: Navigate to the Apps screen.
You see this window: 4. Select Speed Dial/Group Dial List.
You see this window: 5. Select an empty entry and click the icon. Note: To edit an entry, select it and click the icon. icon. To delete an entry, select it and click the 6. Do one of the following: • To create a speed dial entry, select Speed Dial, enter a name and fax number, and click OK. • To create a group dial entry, select Group, enter a name, select your desired fax numbers, and click OK. 7. Repeat the previous steps as necessary to add all your speed dial or group dial entries. 8.
Setting Up Speed/Group Dial Lists Using the Fax Utility - OS X You can set up your speed dial and group dial lists using the FAX Utility. The utility also lets you import fax numbers from the MacAddress Book and back up fax numbers to your product's memory. Note: You can create up to 60 speed dial and group dial entries combined. 1. In the Apple menu or the Dock, select System Preferences.
You see this window: 5. To add an entry, double-click an empty entry. Note: To edit an entry, select it and change the information. To delete an entry, select it and press the Delete key on your keyboard. 6. Do one of the following: • To create a speed dial entry, select Speed Dial, enter a name and fax number, and click OK. • To create a group dial entry, select Group Dial, enter a name, select your desired fax numbers, and click OK. 7.
Sending Faxes See these sections to send faxes using your product. Sending Faxes from the Product Control Panel Sending Faxes Using the Fax Utility - Windows Sending Faxes Using the Fax Utility - OS X Parent topic: Faxing Sending Faxes from the Product Control Panel See these sections to send faxes using the product's control panel.
4. Do one of the following: • Enter the fax number using the buttons on the numeric keypad. Note: If necessary, enter an outside line access code (such as 9) at the beginning of the fax number. If the access code has been set up in the Line Type setting, enter the # pound sign instead of the code. • Press the Contacts button, select one or more recipients from the list, and press the OK button. • Press the Redial/Pause button to redial the last dialed fax number. 5.
Setting Options Description Resolution Standard Adjusts the scan resolution and print quality for outgoing faxes. Fine Photo Density Direct Send Auto Automatically adjusts the darkness of outgoing faxes. Manual Lets you select from various density levels. Off Sends monochrome faxes to a single recipient as soon as the connection is made, without saving the scanned image to memory. You cannot use this feature when sending a color fax or sending to multiple recipients.
Setting Options Description Fax Report Fax Settings List Prints the current fax settings. Fax Log Prints a transmission report automatically after you send a fax. Last Transmission Prints a report for the previous fax that was sent or received through polling. Protocol Trace Prints a list of fax documents stored in the printer’s memory, such as unfinished jobs.
Related topics Placing Originals on the Product Sending a Fax at a Specified Time You can send a fax at a time of your choice. Note: You can send faxes only in black-and-white when you use this option. 1. Place your original on the product for faxing. 2. Press the home button, if necessary. 3. Press the up or down arrow button, select Fax, and press the OK button. You see a screen like this: 4. Enter a fax number or select a number from the Contacts list and press the OK button.
After scanning your originals, your product dials the number and sends the fax at the specified time. Note: If the product is turned off at the specified time, the fax is sent when you turn it back on. Parent topic: Sending Faxes from the Product Control Panel Related references Fax Send Settings Related topics Placing Originals on the Product Setting Up Contacts and Contact Groups Sending Faxes Using the Fax Utility - Windows You can send a fax from a printing program in Windows.
2. Select your product with the FAX option as the printer. 3. To change the Paper Size, Orientation, Color, Image Quality, or Character Density settings, click the Preferences or Properties button. Note: If you see a Setup, Printer, or Options button, click it. Then click Preferences or Properties on the next screen. For more information about selecting fax print settings, click Help. 4. Select the Page Range as necessary. (Leave the Number of copies set to 1.) 5. Click Print or OK.
You see a window like this: 7. Enter the recipient's name and fax number or select a recipient from the phonebook, then click Next. Note: For detailed instructions on using the Epson FAX Utility, click Help. 8. Select a cover sheet and enter a subject and message, then click Next. 9. Click Send to transmit your fax. Parent topic: Sending Faxes Sending Faxes Using the Fax Utility - OS X You can send a fax from a OS X printing program using the FAX Utility.
2. Select the print command in your application. Note: You may need to select a print icon on your screen, the Print option in the File menu, or another command. See your application's help utility for details. 3. Select your product FAX option as the Printer setting. 4. If necessary, click the arrow next to the Printer setting or the Show Details button to expand the print window. 5. Select the number of pages you are faxing as the Pages setting. Note: Leave the Copies setting set to 1. 6.
You see this window: 7. Do one of the following to choose your recipient: • Select a name or group from the Recipient List. • Enter a name, company, and fax number and click the + button. • Click the icon and select a recipient from your address book. 8. Select Fax Settings from the pop-up menu.
You see this window: 9. Select the Color and Image Quality settings you want to use for your fax. 10. Click Fax. Parent topic: Sending Faxes Receiving Faxes See these sections to receive faxes with your product. Fax Reception Receiving Faxes Automatically Receiving Faxes Manually Receiving a Fax by Polling Parent topic: Faxing Fax Reception Your product will automatically receive and print faxes when you set the Receive Mode to Auto.
Parent topic: Receiving Faxes Receiving Faxes Automatically To receive faxes automatically, make sure Receive Mode is set to Auto (the default setting for the product). To change the Receive Mode setting if necessary, select Setup > Fax Settings > Receive Settings > Receive Mode. If an answering machine is connected, make sure the product's Rings to Answer setting is set higher than the number of rings your answering machine is set to answer a call.
You see a screen like this: 3. Press the OK button. 4. Select Polling Receive and select On. 5. Press the back button. 6. Enter the fax number. 7. Press one of the Start buttons to start receiving the fax.
Replacing Ink Cartridges When an ink cartridge is expended, you need to replace it. You may also need to replace a cartridge that is more than six months old, or if your printouts do not look their best, even after cleaning and aligning the print head. Note: Please dispose of your used Epson branded ink cartridges responsibly and in accordance with local requirements. If you would like to return your used ink cartridges to Epson for proper disposal, please go to epson.com/recycle for more information.
You see a screen like this: Note: The display is different depending on which ink cartridges are low or expended, if any. Displayed ink levels are approximate. Parent topic: Check Cartridge Status Related tasks Removing and Installing Ink Cartridges Checking Cartridge Status with Windows A low ink reminder appears if you try to print when ink is low, and you can check your cartridge status at any time using a utility on your Windows computer. 1.
You see this window: 2. Replace or reinstall any ink cartridge indicated on the screen. Note: Depending on the color of the expended cartridge and how you are printing, you may be able to continue printing temporarily. Note: If any of the cartridges installed in the product are broken, incompatible with the product model, or improperly installed, Epson Status Monitor will not display an accurate cartridge status. 3.
You see this window: 4. Deselect the See Low Ink Reminder alerts checkbox at the bottom of the screen. 5. To disable promotional offers, deselect the Display Epson Offers checkbox.
Checking Cartridge Status with OS X You can check your cartridge status using a utility on your Mac. 1. In the Apple menu or the Dock, select System Preferences. Select Print & Fax, Print & Scan, or Printers & Scanners, select your product, and select Options & Supplies. Select Utility and select Open Printer Utility. 2. Select EPSON Status Monitor. You see a window like this: 3. Do the following as necessary: • To update the ink cartridge status, click Update.
• Replace or reinstall any ink cartridge indicated on the screen. Note: Depending on the color of the expended cartridge and how you are printing, you may be able to continue printing temporarily. Note: If any of the cartridges installed in the product is broken, incompatible with the product model, or improperly installed, Epson Status Monitor will not display an accurate cartridge status.
Ink color Part number Standard-capacity High-capacity Cyan 220 220XL Magenta 220 220XL Yellow 220 220XL Parent topic: Purchase Epson Ink Cartridges Removing and Installing Ink Cartridges Make sure you have your replacement cartridges handy before you begin. You must install new cartridges immediately after removing the old ones. Caution: Leave your old cartridges in the printer until you are ready to replace them to prevent the print head nozzles from drying out.
2. Lift up the scanner unit. Caution: Do not move the print head by hand; otherwise, you may damage your product. Do not touch the flat white cable inside the printer. 3. Squeeze the tab on the cartridge and lift the cartridge straight up to remove it.
Note: Dispose of used cartridges carefully. Do not take the used cartridge apart or try to refill it. Warning: If ink gets on your skin, wash it thoroughly with soap and water. If ink gets into your eyes, flush them immediately with water. If ink gets into your mouth, spit it out and see a doctor right away. Keep ink cartridges out of the reach of children. 4. Before opening the new cartridge package, shake it gently four or five times.
5. Remove the cartridge from the package. Caution: Do not touch the green chip or the small window on the cartridge. Install the new cartridge immediately after removing the old one; if you do not, the print head may dry out and be unable to print. 6. Remove the yellow tape from the side of the cartridge. Caution: Do not remove any other labels or seals, or ink will leak.
7. Insert the new cartridge into the holder and push it down until it clicks into place. 8. Lower the scanner unit. 9. Press one of the Start buttons. The print head moves to its home position and the printer starts charging the ink. When you see a confirmation message on the screen, ink charging is finished. Caution: Never turn off the product while the power light is flashing or you will waste ink. If you remove a low or expended ink cartridge, you cannot re-install and use the cartridge.
Caution: If you remove an ink cartridge for later use, protect the ink supply area from dirt and dust and store it in the same environment as the printer. The valve in the ink supply port is designed to contain any excess ink, but do not touch the ink supply port or surrounding area. Always store ink cartridges with the label facing up; do not store cartridges upside-down.
3. Access the print settings in your print application. 4. Click the Main tab. 5. Select Plain Paper/Bright White Paper or Envelope as the paper type setting. 6. Select the Black/Grayscale checkbox. 7. Click OK. 8. Print your document. Epson Status Monitor 3 displays a print message. 9. Click Print in Black to print your document.
You see a screen like this: 6. Select On as the Permit temporary black printing setting. 7. Click OK. 8. Close the utility window. 9. Load plain paper or an envelope in your product. 10. Access the print settings in your print application. 11. Select Print Settings from the pop-up menu. 12. Select Plain Paper/Bright White Paper or Envelope as the paper type setting. 13. Select the Grayscale option. 14. Click Print to print your document.
Conserving Low Black Ink with Windows The following window appears when black ink runs low and there is more color ink. Note: The window appears only when you have selected Plain Paper/Bright White Paper as the paper type setting, and depends on other selected print settings. To use this feature, Epson Status Monitor must be enabled. • Click Yes to use a mixture of color inks to create black, or No to continue using the remaining black ink for the document you are printing.
Adjusting Print Quality If your print quality declines, you may need to run a utility to clean or align the print head. If running these utilities does not solve the problem, you may need to replace the ink cartridges. Print Head Maintenance Print Head Alignment Cleaning the Paper Path Print Head Maintenance If your printouts become too light, or you see dark or light bands across them, you may need to clean the print head nozzles. Cleaning uses ink, so clean the nozzles only if print quality declines.
You see this screen: 3. Select Maintenance and press the OK button. 4. Select Print Head Nozzle Check and press the OK button. 5. Press one of the Start buttons to begin printing.
6. Check the printed pattern to see if there are gaps in the lines. Print head is clean Print head needs cleaning 7. Do one of the following: • If there are no gaps, select Finish and press the OK button. • If there are gaps or the pattern is faint, select Clean the print head and press the OK button to continue.
8. Follow the instructions on the screen to clean the print head, check the nozzles, and repeat the process as necessary. If you don’t see any improvement after cleaning the print head up to 4 times, leave the product turned on and wait at least 6 hours. Then try cleaning the print head again. If quality still does not improve, one of the ink cartridges may be old or damaged and needs to be replaced.
You see a window like this: 4. Click Print.
5. Check the printed pattern to see if there are gaps in the lines. Print head is clean Print head needs cleaning 6. If there are no gaps, click Finish. If there are gaps or the pattern is faint, clean the print head.
Related concepts Print Head Cleaning Related tasks Removing and Installing Ink Cartridges Related topics Loading Paper Print Head Cleaning If print quality has declined and the nozzle check pattern indicates clogged nozzles, you can clean the print head. Note: You cannot clean the print head if an ink cartridge is expended, and may not be able to clean it when a cartridge is low. You must replace the cartridge first.
3. Select Maintenance and press the OK button. 4. Press the up or down arrow buttons, select Print Head Cleaning, and press the OK button. 5. Press one of the Start buttons to start the cleaning cycle. The power light flashes throughout the cleaning cycle and stays on when the cleaning cycle is finished. Caution: Never turn off the product during a cleaning cycle or you may damage it. 6. Press the OK button to run a nozzle check to confirm that the print head is clean.
You see a window like this: 5. Click Start to begin the cleaning cycle. Caution: Never turn off the product during a cleaning cycle or you may damage it. 6. When the cleaning cycle is finished, you can check to see if the nozzles are clean; click Print Nozzle Check Pattern and click Print.
7. Check the printed pattern to see if there are gaps in the lines. Print head is clean Print head needs cleaning • If there are no gaps, click Finish. • If there are gaps or the pattern is faint, click Clean to clean the print head again. If you don’t see any improvement after cleaning the print head up to 4 times, turn off the product and wait at least 6 hours. Then try cleaning the print head again.
print head again. If quality still does not improve, one of the ink cartridges may be old or damaged and needs to be replaced. Parent topic: Print Head Cleaning Related tasks Cleaning the Print Head Using the Product Control Panel Checking the Nozzles Using the Product Control Panel Removing and Installing Ink Cartridges Print Head Alignment If your printouts become grainy or blurry, you notice misalignment of vertical lines, or you see dark or light horizontal bands, you may need to align the print head.
4. Select Print Head Alignment and press the Color button to print an alignment sheet. Note: Do not cancel printing while you are printing a head alignment pattern. 5. Check the printed pattern and press the up or down arrow buttons to choose the number representing the best printed pattern for each set. Press the OK button after each selection. Parent topic: Print Head Alignment Aligning the Print Head Using a Computer Utility You can align the print head using a utility on your Windows or Mac computer.
You see a window like this: 5. Check the printed pattern and follow the instructions on the screen to choose the number representing the best printed pattern for each set.
Horizontal alignment • After choosing each pattern number, click Next. • If no patterns are aligned in one or more of the sets, choose the closest one in each set and click Realignment. Then print another alignment sheet and check it. Note: Click Skip (where available) if you want to skip a particular alignment sheet. 6. When you are done, click Finish.
Cleaning and Transporting Your Product See these sections if you need to clean or transport your product. Cleaning Your Product Transporting Your Product Cleaning Your Product To keep your product working at its best, you should clean it several times a year. Close the output tray and paper support when you are not using the product to protect it from dust. Caution: Do not use a hard brush, alcohol, or paint thinner to clean the product or you may damage it.
5. Clean the scanner glass with a soft, lint-free cloth (microfiber is recommended), moistened with a little glass cleaner. If you see lines in your scans or copies, clean the left side of the glass carefully. Caution: Do not spray glass cleaner directly on the glass and do not press the glass surface with any force. 6. Open the ADF cover and use a soft, dry, lint-free cloth (microfiber is recommended) to clean the rollers and the interior of the ADF.
7. Clean the outer case and control panel with a soft, dry, lint-free cloth. Do not use liquid or chemical cleansers. Parent topic: Cleaning and Transporting Your Product Transporting Your Product If you need to store your product or transport it a long distance, prepare it for transportation as described here. Caution: During transportation and storage, follow these guidelines: • Avoid tilting the product, placing it vertically, or turning it upside down; otherwise ink may leak.
4. Lower the scanner unit. 5. Remove all the paper from the product. 6. Unplug the power cable. 7. Disconnect any connected cables. 8. Close the output tray and paper support. 9. Place the product in its original packing materials, if possible, or use equivalent materials with cushioning around the product. Keep the product level during transportation. Be sure to remove the tape from the ink cartridge holder before turning on your product.
Solving Problems Check these sections for solutions to problems you may have using your product.
Parent topic: Solving Problems Product Status Messages You can often diagnose problems with your product by checking the messages on its LCD screen. LCD screen message Condition/solution Paper jam Paper is jammed in the product. Remove the jammed paper and press the OK button to clear the error. Paper jam in the ADF Paper is jammed in the ADF or an object is blocking the hole in the front left corner of the product next to the scanner glass.
Paper Feeding Problems Paper Jam Problems Inside the Product Document Jams in the Automatic Document Feeder Related tasks Checking for Software Updates Removing and Installing Ink Cartridges Connecting a Telephone or Answering Machine Selecting Advanced Fax Settings Related topics Wi-Fi Networking Loading Paper Running a Product Check Running a product check helps you determine if your product is operating properly. 1. Disconnect any interface cables connected to your product. 2.
7. Do the following, depending on the results of the product check: • If the page prints and the nozzle check pattern is complete, the product is operating properly. Any operation problem you may have could be caused by your computer, cable, software, or selected settings. Check the other solutions in this book or try uninstalling and reinstalling your printer software. • If the page prints but the nozzle check pattern has gaps, clean or align the print head.
3. Press the up or down arrow buttons to select one of these options and press the OK button. • Network Settings: Restores all of the default network settings. • Fax Settings: Restores all of the fax settings. • Clear All Data and Settings: Restores all of the default settings and resets contact and network data on the control panel. You see a confirmation screen. 4. Press the up arrow button to reset the selected settings. Press the down arrow button if you want to cancel the operation.
• Close any other programs, including screen savers and virus protection software, and install your product software again. • In Windows, make sure your product is selected as the default printer and the correct port is shown in the printer properties. • If you see any error message or your software does not install correctly in Windows, you may not have software installation privileges. Contact your System Administrator.
• Make sure to place your product within contact range of your 2.4 GHz router or access point. Avoid placing your product near a microwave oven, 2.4 GHz cordless phone, or large metal object, such as a filing cabinet. Note: If you are using a 5 GHz wireless router, set the router to operate in dual band (2.4 GHz and 5 GHz) mode. See your router documentation for instructions. • Verify that your router or access point is operating correctly by connecting to it from your computer or another device.
Related topics Wi-Fi Networking Network Software Cannot Find Product on a Network If EpsonNet Setup cannot find your product on a network, try these solutions: • Make sure your product is turned on and connected to your network. Verify connection using your product control panel. • Check if your network name (SSID) contains non-ASCII characters. Your product cannot display nonASCII characters. • Make sure your product is not connected to a guest network.
Product Does Not Appear in OS X Printer Window If your product does not appear in the OS X printer window, try these solutions: • Turn your product off, wait 30 seconds, then turn it back on again. • If you are connecting the product via Wi-Fi Protected Setup (WPS) and the Wi-Fi icon does not appear on your product's LCD, make sure you select one of the WPS options from the product control panel within 2 minutes of pressing the WPS button on your router.
• Check to see if your wireless router or access point has an enabled Privacy Separator function that is preventing printing from a device over the network. See your router or access point documentation for instructions on disabling the Privacy Separator function.
• Make sure the option selected as the Timeout Setting in the Epson Scan Settings program is long enough to complete scanning over a network. • You may need to disable the firewall and any anti-virus software on your wireless router or access point. Note: With OS X, in addition to scanning with Image Capture, you can download and install Epson Scan scanning software.
Product Makes Noise When It Sits for a While Your product is performing routine maintenance. This is normal. Parent topic: Solving Copying Problems Solving Paper Problems Check these sections if you have problems using paper with your product.
Related topics Loading Paper Paper Jam Problems Inside the Product If paper has jammed inside the product, follow the steps below to clear the jam. 1. Cancel the print job, if necessary. 2. Remove any jammed paper from the rear paper feed slot. 3. Lift the scanner unit.
Caution: Do not touch the flat white cable inside the printer. Do not lift the scanner unit while the document cover is open. 4. Remove any paper inside, including torn pieces. 5. Close the scanner unit. 6. Follow the prompts on the LCD screen to clear any error messages. If you still see a paper jam message, check the other paper jam solutions.
2. Open the ADF cover.
3. Remove any jammed paper. Caution: Do not remove paper jammed inside the ADF without opening the cover or you could damage the ADF.
4. Leave the ADF cover open, then lift the paper feeder. 5. Remove any jammed paper or torn pieces. 6. Lower the paper feeder (but don't close the ADF cover). 7. Raise the ADF input tray. 8. Carefully remove any jammed paper. 9. Lower the ADF input tray and reload your originals. Caution: Make sure you do not load the ADF beyond its capacity for your paper size.
• If paper is wrinkled when it ejects, it may be damp or too thin. Load new paper and be sure to select the correct paper type setting when you reprint.
• In Windows, make sure your product is selected as the default printer. • In Windows, clear any stalled print jobs from the Windows Spooler: • Windows 8.x: Navigate to the Apps screen and select Control Panel > Hardware and Sound > Devices and Printers. Right-click your product name, select See what's printing, and select your product name again if necessary. Right-click the stalled print job, click Cancel, and click Yes. • Windows 7: Click and select Devices and Printers.
4. Click the Monitoring Preferences button. 5. Click the checkbox for the option that adds the shortcut icon to the taskbar. 6. Click OK to close the open program windows. Parent topic: Solving Problems Printing from a Computer Error After Cartridge Replacement If you see an error light or error message after you replace an ink cartridge, follow these steps: 1. Make sure the print head is in the ink cartridge replacement position. (The ink cartridge holder should be beneath the cutout in the product case.
For the fastest printing, select the following settings in your product software: • Make sure the paper type setting matches the type of paper you loaded. • Turn on any high speed settings in your product software. • Select a lower print quality setting.
Slanted Printout Parent topic: Solving Problems Inverted Image If your printed image is inverted unexpectedly, try these solutions: • Turn off any mirror or inversion settings in your printing application. • Turn off the Mirror Image, Flip horizontally, or Reverse page orientation settings in your printer software. (This option has different names, depending on your operating system version.
Parent topic: Solving Page Layout and Content Problems Related concepts Print Head Nozzle Check Print Head Cleaning Related tasks Selecting Basic Print Settings - Windows Selecting Basic Print Settings - OS X Selecting Printing Preferences - OS X Selecting Extended Settings - Windows Incorrect Margins on Printout If your printed page has incorrect margins, try these solutions: • Make sure you selected the correct paper size settings in your printing program and printer software.
• Adjust the Expansion setting to adjust the amount of image expansion on the edges of borderless prints. • Make sure the image size and the paper size are set correctly; if the image is small, the enlargement may not be enough to cover the paper.
• If incorrect characters still appear in your prints, try connecting your product using a different cable. Parent topic: Solving Page Layout and Content Problems Incorrect Image Size or Position If your printed image is the wrong size or in the wrong position, try these solutions: • Make sure you selected the correct paper size and layout settings in your printing program and printer software. • Make sure your paper is positioned correctly for feeding into the printer.
Solving Print Quality Problems Check these sections if your printouts have problems with print quality, but your image looks fine on your computer screen. Note: When printing using AirPrint, the available print settings are different from those covered in this manual. See the Apple website for details.
Selecting Printing Preferences - OS X Related topics Loading Paper Replacing Ink Cartridges Blurry or Smeared Printout If your printouts are blurry or smeared, try these solutions: • Make sure your paper is not damp, curled, old, or loaded incorrectly in your product. • Use a support sheet with special paper, or load special paper one sheet at a time. • Make sure your paper meets the specifications for your product. • Use Epson papers to ensure proper saturation and absorption of genuine Epson inks.
Related references Available Epson Papers Paper Specifications Related tasks Selecting Basic Print Settings - Windows Selecting Additional Layout and Print Options - Windows Selecting Basic Print Settings - OS X Selecting Printing Preferences - OS X Cleaning the Paper Path Related topics Loading Paper Faint Printout or Printout Has Gaps If your printouts are faint or have gaps, try these solutions: • Run a nozzle check to see if any of the print head nozzles are clogged.
Cleaning the Paper Path Related topics Loading Paper Grainy Printout If your printouts are grainy, try these solutions: • Make sure you loaded the printable side of the paper correctly for your product. • Select a higher print quality setting and turn off any high speed settings in your product software. • Run a nozzle check to see if any of the print head nozzles are clogged. Then clean the print head, if necessary. • Align the print head.
Selecting Printing Preferences - OS X Related topics Loading Paper Incorrect Colors If your printouts have incorrect colors, try these solutions: • Make sure the Black/Grayscale or Grayscale setting is not selected in your printer software. • Run a nozzle check to see if any of the print head nozzles are clogged. Then clean the print head, if necessary. • The ink cartridges may be old or low on ink, and you may need to replace them. • Your printed colors can never exactly match your on-screen colors.
Cannot Start Epson Scan Parent topic: Solving Problems Scanning Software Does Not Operate Correctly If your scanning software does not operate correctly, try these solutions: • Make sure your computer has adequate memory and meets the system requirements for your operating system. • Make sure your computer is not running in a power-saving mode, such as sleep or standby. If so, wake your system and restart your scanning software.
Windows 8.x: Navigate to the Apps screen and select EPSON Scan Settings. Make sure the correct Connection setting is selected, then click the Test button. Windows (other versions): Click or Start > All Programs or Programs > EPSON > EPSON Scan > EPSON Scan Settings. Make sure the correct Connection setting is selected, then click the Test button. OS X: Open the Applications folder, click Epson Software, and click EPSON Scan Settings.
Parent topic: Solving Problems Image Consists of a Few Dots Only If your scanned image consists only of a few dots, try these solutions: • Make sure you placed your original for scanning facing the correct way. • If you are scanning using the Epson Scan Black & White setting, adjust the Threshold setting and scan again.
Image is Distorted or Blurry If a scanned image appears distorted or blurry, try these solutions: • Make sure your original is not wrinkled or warped. This may prevent the original from laying flat on the scanner glass. • Do not move your original or your product during scanning. • Your product will not operate properly while tilted at an angle. Place it on a flat, stable surface that extends beyond the base of the product in all directions.
Back of Original Image Appears in Scanned Image If an image from the back of a thin original appears in your scanned image, place a piece of black paper on the back of the original and scan it again. Parent topic: Solving Scanned Image Quality Problems Ripple Patterns Appear in an Image You may see a ripple pattern (called a moiré) in scanned images of printed documents. This is caused by interference from differing pitches in the scanner's screen and your original's halftone screen.
Scan Area is Not Adjustable in Thumbnail Preview If you cannot adjust the scan area while viewing a Thumbnail preview in Epson Scan, try these solutions: • Create a scan area by drawing a marquee on your preview image and adjusting it as necessary. • Switch to Normal preview mode, if available, and preview your image again.
• Make sure Auto Answer mode is turned on to receive faxes automatically. Check your product control panel to see if this mode is turned on. • Make sure Receive Mode is set to Auto so you can receive faxes automatically. • Check that the cable connecting your telephone wall jack to your product's LINE port is secure. • Print a fax connection report using your product control panel or fax software to help diagnose the problem.
Selecting Advanced Fax Settings Receiving Faxes Automatically Printing Fax Reports Related topics Loading Paper Cannot Receive Faxes with a Telephone Connected to Your Product If you cannot receive faxes when a telephone is connected to your product, try these solutions: • Make sure your telephone is connected to your product's EXT port. • Make sure the Receive Mode is set to Manual.
3. Do one of the following: • Windows 8.x: Navigate to the Apps screen and select Control Panel > Programs > Programs and Features. Select the uninstall option for your Epson product, then select Uninstall/Change. Note: If you see a User Account Control window, click Yes or Continue. Select your product again, if necessary, then select OK, and click Yes to confirm the uninstallation. • Windows (other versions): Click or Start, and select All Programs or Programs.
Note: If you find that re-installing your product software does not solve a problem, contact Epson. 1. To download the Uninstaller utility, visit the Epson download site (U.S. downloads or Canadian downloads). 2. Follow the instructions on the screen to install the Uninstaller utility. 3. Quit all applications currently running on your Mac. 4. Double-click the Uninstaller icon. 5. Select the checkbox for each software program you want to uninstall. 6. Click Uninstall. 7.
Then call: • U.S.: (562) 276-4382, 6 AM to 8 PM, Pacific Time, Monday through Friday, and 7 AM to 4 PM, Pacific Time, Saturday • Canada: (905) 709-3839, 6 AM to 8 PM, Pacific Time, Monday through Friday, and 7 AM to 4 PM, Pacific Time, Saturday Days and hours of support are subject to change without notice. Toll or long distance charges may apply. Purchase Supplies and Accessories You can purchase genuine Epson ink and paper at Epson Supplies Central at epson.com/ink3 (U.S. sales) or epson.
Technical Specifications These sections list the technical specifications for your product. Note: Epson offers a recycling program for end of life products. Please go to this site for information on how to return your products for proper disposal.
Parent topic: Technical Specifications OS X System Requirements To use your product and its software, your Mac should use one of these operating systems: • OS X 10.9.x • OS X 10.8.x • OS X 10.7.x • OS X 10.6.x Note: Visit Epson's support website at epson.com/support (U.S.) or epson.ca/support (Canada) for the latest in compatibility and drivers for your product.
Color depth Color: 48 bits per pixel internal (16 bits per pixel per color internal) 24 bits per pixel external (8 bits per pixel per color external) Grayscale: 16 bits per pixel per color internal 8 bits per pixel per color external Black and white: 16 bits per pixel per color internal 1 bit per pixel per color external Light source LED Parent topic: Technical Specifications Fax Specifications Fax type Black-and-white and color fax capability (ITU-T Super Group 3) Support line Household phone lines
Redial 2 times with 1 minute intervals (specification may differ by country or region) Interface RJ-11 Phone Line RJ-11 Telephone set connection Parent topic: Technical Specifications Paper Specifications Note: Since the quality of any particular brand or type of paper may be changed by the manufacturer at any time, Epson cannot guarantee the quality of any non-Epson brand or type of paper. Always test a sample of paper stock before purchasing large quantities or printing large jobs.
Single sheets - normal printing 1 Margin: 0.12 inch (3 mm) minimum 2 Quality border/top: 1.57 inch (40 mm) minimum 3 Quality border/bottom: 1.26 inch (32 mm) minimum Single sheets - borderless printing 1 Quality border/top: 1.69 inch (43 mm) minimum 2 Quality border/bottom: 1.
Envelopes 1 Left/right margins: 0.12 inch (3 mm) minimum 2 Top/bottom margins: 0.20 inch (5 mm) minimum 3 Quality border/right: 0.71 inch (18 mm) minimum 4 Quality border/left: 1.57 inch (40 mm) minimum Parent topic: Technical Specifications Ink Cartridge Specifications Note: This product uses only genuine Epson-brand cartridges. Other brands of ink cartridges and ink supplies are not compatible and, even if described as compatible, may not function properly.
Temperature Storage: –22 to 104 °F (–30 to 40 °C) 1 month at 104 °F (40 °C) Ink freezes at 3.2 °F (–16 °C) Ink thaws and is usable after 3 hours at 77 °F (25 °C) Note: For best printing results, use up a cartridge within 6 months of opening the package. Parent topic: Technical Specifications Related references Ink Cartridge Part Numbers Dimension Specifications Height Stored: 8.7 inches (221 mm) Printing: 11.5 inches (291 mm) Width Stored: 15.4 inches (392 mm) Printing: 15.
Power consumption Standalone copying: Approximately 11 W (ISO/IEC24712) Ready mode: Approximately 4 W Sleep mode: Approximately 1.7 W Power off mode: Approximately 0.
Coordination modes Infrastructure mode; simple AP mode compatible Ad hoc mode; not supported for IEEE 802.11n WiFi Direct mode; not supported for IEEE 802.11b Security Protocol SSL/TLS: HTTPS Server/Client and IPPS Parent topic: Technical Specifications Safety and Approvals Specifications United States Safety: UL60950-1 EMC: FCC part 15 Subpart B class B Canada Safety: CAN/CSA C22.2 No.
Notices Check these sections for important notices about your product. Note: Epson offers a recycling program for end of life products. Please go to this site for information on how to return your products for proper disposal. Important Safety Instructions FCC Compliance Statement Software Notice Trademarks Copyright Notice Important Safety Instructions Before using your Epson product, read and follow these safety instructions.
• If you use an extension cord with the product, make sure the total ampere rating of the devices plugged into the extension cord does not exceed the cord's ampere rating. Also, make sure the total ampere rating of all devices plugged into the wall outlet does not exceed the wall outlet's ampere rating. • Always turn off the product using the power button, and wait until the power light stops flashing before unplugging the product or cutting off power to the electrical outlet.
• Unplug the product and refer servicing to qualified service personnel under the following conditions: if the power cord or plug is damaged; if liquid has entered the product; if the product has been dropped or the case damaged; if the product does not operate normally or exhibits a distinct change in performance. Adjust only those controls that are covered by the operating instructions. • Leave the ink cartridges installed.
• After bringing an ink cartridge inside from a cold storage site, allow it to warm up at room temperature for at least three hours before using it. • Store ink cartridges with their labels facing upward. Do not store cartridges upside down. Parent topic: Important Safety Instructions Wireless Connection Safety Instructions Radio waves from this product may adversely affect the operation of medical equipment or automatically controlled devices, such as pacemakers, automatic doors or fire alarms.
FCC Compliance Statement For United States Users This equipment complies with Part 68 of the FCC rules and the requirements adopted by the Administrative Council for Terminal Attachments ("ACTA") . On the surface of this equipment is a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. If requested, this number must be provided to the telephone company. Applicable certification jack Universal Service Order Codes ("USOC") for the equipment: RJ11C.
This equipment may not be used on coin service provided by the telephone company. Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission or corporation commission for information. If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm equipment.
equipment interface cable with this device. If this equipment has more than one interface connector, do not leave cables connected to unused interfaces. Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment. For Canadian Users 1. This product meets the applicable Industry Canada technical specifications. 2. The Ringer Equivalence Number is an indication of the maximum number of devices allowed to be connected to a telephone interface.
This printer product includes software developed by the OpenSSL project for use in the OpenSSL Toolkit (http://www.openssl.org/). This product includes cryptographic software written by Eric Young (eay@cryptsoft.com). 5. The license terms of each open source software program are described in OSS.pdf on the Epson support site. 6. The list of open source software programs which this printer product includes are as follows.
Net-SNMP license This printer product includes the open source software program "Net-SNMP" which applies the terms and conditions provided by owner of the copyright to the "Net-SNMP". OpenSSL License/Original SSLeay License This printer product includes t he open source software program "OpenSSL toolkit" which applies the license terms of OpenSSL License and Original SSLeay License.
This printer product includes the open source software program "OpenLDAP 2.4.30" which applies the terms and conditions provided by owner of the copyright to the "OpenLDAP". IPsec-Tools license This printer product includes the open source software program "IPsec-Tools 0.8.0" which applies the terms and conditions provided by owner of the copyright to the "IPsec-Tools".
Seiko Epson Corporation shall not be liable for any damages or problems arising from the use of any options or any consumable products other than those designated as Original Epson Products or Epson Approved Products by Seiko Epson Corporation. Seiko Epson Corporation shall not be held liable for any damage resulting from electromagnetic interference that occurs from the use of any interface cables other than those designated as Epson approved Products by Seiko Epson Corporation.
certain circumstances, those circumstances may not be as broad as some people assume. Contact your legal advisor for any questions regarding copyright law. Parent topic: Copyright Notice Default Delay Times for Power Management for Epson Products This product will enter sleep mode after a period of nonuse. This is to ensure that the product meets Energy Star standards of energy efficiency. More energy savings can be achieved by setting the time to sleep to a shorter interval.
