User's Guide

LCD screen message Condition/solution
Cannot print because Press either of the Start buttons to cancel the current job and print the next
memory is full job.
Memory is full. Data was If the quality of the printout is not acceptable, try simplifying the print job by
printed with low reducing the number of graphics or the number and type of fonts.
resolution.
Memory is full. Only one To print multiple copies of a document, try simplifying the print job by
copy of documents was reducing the number of graphics or the number and type of fonts.
printed.
Parent topic: Solving Problems
Related references
Paper Jam Problems Inside the Product
Paper Jam Problems in the Cassette
Paper Jam Problems in the Duplexer
Document Jams in the Automatic Document Feeder
Where to Get Help
Related tasks
Connecting a USB Thumb Drive or External Device
Related topics
Loading Paper
Placing Originals on the Product
Solving Network Problems
Setting Up Fax Features
Running a Product Check
Running a product check helps you determine if your product is operating properly.
1. Disconnect any interface cables connected to your product.
2. Load plain paper in the product.
3. Press the Setup button.
4. Press the arrow buttons to select Maintenance and press the OK button.
You see this screen:
256