Administrator's Guide

Group Policy Settings
Setting Options/Description
Access Control Permit Access to permit IP packets to pass
through
Refuse Access to prevent IP packets from
passing through
IPsec to permit IPsec packes to pass through
Local Address(Printer) Select an IPv4 or IPv6 address that matches your
network environment; if the IP address is assigned
automatically, select Use auto-obtained IPv4
address
Remote Address(Host) Enter the device's IP address (between 0 and 43
characters long) to control access, or leave blank
to control all addresses; if the IP address is
assigned automatically, such as by DHCP, the
connection may be unavailable, so configure a
static address instead
Method of Choosing Port Select the method you want to used for specifiying
ports
Service Name If you selected Service Name as the Method of
Choosing Port option, select a service name
option here; see the next table for more
information
Transport Protocol If you selected Port Number as the Method of
Choosing Port option, select one of these
encapsulation modes:
Any Protocol
TCP
UDP
ICMPv4
See the Group Policy Guidelines table for more
information
19