WF-4630/WF-4640 User's Guide
Contents WF-4630/WF-4640 User's Guide ............................................................................................................... 13 Product Basics .......................................................................................................................................... Using the Control Panel ..................................................................................................................... Control Panel Buttons and Lights ..............................
Selecting Wireless Network Settings From the Control Panel ....................................................... Wi-Fi Direct Mode Setup .................................................................................................................... Enabling Wi-Fi Direct Mode ........................................................................................................... Wi-Fi Protected Setup (WPS)..............................................................................................
Selecting Basic Print Settings - Windows ...................................................................................... 79 Paper Source Options - Windows ............................................................................................. 81 Print Quality Options - Windows ............................................................................................... 82 Multi-Page Printing Options - Windows.....................................................................................
Cancelling Printing Using a Product Button...................................................................................... 115 Scanning .................................................................................................................................................. Starting a Scan................................................................................................................................. Starting a Scan Using the Product Control Panel ..............................
Setting Up Basic Fax Features .................................................................................................... Selecting Your Country or Region........................................................................................... Selecting the Date and Time................................................................................................... Using the Fax Setup Wizard ...................................................................................................
Receiving Faxes............................................................................................................................... Fax Reception ............................................................................................................................. Receiving Faxes Automatically ................................................................................................... Receiving Faxes Manually...........................................................................
Replacing the Maintenance Box....................................................................................................... 238 Adjusting Print Quality............................................................................................................................ Print Head Maintenance................................................................................................................... Print Head Nozzle Check..................................................................
Product Makes Noise When It Sits for a While............................................................................. Solving Paper Problems................................................................................................................... Paper Feeding Problems............................................................................................................. Paper Jam Problems Inside the Product ..................................................................................
Image is Distorted or Blurry ......................................................................................................... 298 Image Colors are Patchy at the Edges ........................................................................................ 299 Image is Too Dark ....................................................................................................................... 299 Back of Original Image Appears in Scanned Image .....................................................
Ink Cartridge Safety Instructions.................................................................................................. 319 LCD Screen Safety Instructions................................................................................................... 320 Wireless Connection Safety Instructions ..................................................................................... 320 Telephone Equipment Safety Instructions ........................................................................
WF-4630/WF-4640 User's Guide Welcome to the WF-4630/WF-4640 User's Guide. For a printable PDF copy of this guide, click here.
Product Basics See these sections to learn about the basic features of your product. Using the Control Panel Product Parts Locations Using Eco Mode and Other Power Saving Settings Epson Connect Solutions for Smartphones, Tablets, and More Using AirPrint Using Google Cloud Print Using the Control Panel See these sections to learn about the control panel and select control panel settings.
Control Panel Buttons and Lights Note: The illustrations in this manual show the WF-4630. The instructions apply to both the WF-4630 and WF-4640 unless otherwise noted.
Status Button Information Parent topic: Using the Control Panel Status Icon Information Your product may display status icons on the LCD screen for certain product status conditions. Press to view or change the current network settings. Icons Description Displays additional information or instructions, such as on loading paper or placing a document. A document is in the Automatic Document Feeder (ADF). One or more of the ink cartridges are running low on ink or the maintenance box is nearly full.
Icons Description No Wi-Fi connection. A Wi-Fi network error has occurred or the product is searching for a connection. A Wi-Fi connection has been established. The number of bars indicates the connection's signal strength. An Ad hoc connection has been established. A Wi-Fi Direct mode connection has been established. A Simple AP mode connection has been established.
Setting a Password and Locking the Control Panel You can set an administrator password to lock the following settings and prevent them from being changed: • System Administration Setup settings • Eco mode settings • Presets • Contacts Note: For more information on administration settings, see the Administrator's Guide. 1. Press the home button, if necessary. 2. Select Setup. You see a screen like this: 3. Scroll down and select Admin Settings. 4. Select Admin Password. 5. Select Register.
You see a screen like this: 6. Use the displayed keyboard to enter a password, and press . 7. Enter your password again to confirm. 8. Select OK. 9. Select Lock Setting and select On. When the control panel is locked, you must enter the password to access any of the locked settings. Note: If you forget your password, contact Epson for assistance.
Entering Characters on the LCD Screen Follow these guidelines to enter characters for passwords and other settings. • To move the cursor, select or . • To change the case of letters, select . • To delete the previous character, select . • To enter numbers or symbols, select • To enter a space, select . . Parent topic: Setting a Password and Locking the Control Panel Using Presets You can save frequently used copy, fax, and scan settings as presets.
You see a screen like this: 3. Select Add New. 4. Select the function for which you want to set up a preset. You see the main screen for that function, such as the Copy screen: 5. Select the settings you want to save, and select Save.
You see a screen like this: 6. Use the displayed keyboard to enter a name for the preset, and press . 7. Select Save. When you copy, fax, or scan, you can use the preset by selecting Presets and selecting your preset from the list. Parent topic: Setting a Password and Locking the Control Panel Related tasks Entering Characters on the LCD Screen Changing LCD Screen Language You can change the language used on the LCD screen. Note: This setting can be locked by an administrator.
You see a screen like this: 3. Scroll down and select System Administration. 4. Select Common Settings. 5. Scroll down and select Language. 6. Select a language. Parent topic: Using the Control Panel Adjusting Control Panel Sounds You can adjust the sound level heard when you press buttons on the control panel. Note: This setting can be locked by an administrator. If you cannot access or change this setting, contact your administrator for assistance. 1. Press the home button, if necessary. 2.
You see a screen like this: 3. Scroll down and select System Administration. 4. Select Common Settings. 5. Select Sound. 6. Select Button Press. 7. Press to decrease or to increase the sound. 8. Select OK to exit. Parent topic: Using the Control Panel Adjusting the Screen Brightness You can adjust the brightness of the LCD screen. 1. Press the home button, if necessary. 2. Select Setup.
You see a screen like this: 3. Scroll down and select System Administration. 4. Select Common Settings. 5. Select LCD Brightness. 6. Adjust the screen brightness by selecting a brightness level or by pressing the left and right arrow buttons. 7. Select OK to exit. Parent topic: Using the Control Panel Turning Off the Operation Time Out Setting The Operation Time Out setting causes the LCD screen to return to the Home screen after a few minutes of inactivity.
You see a screen like this: 3. Scroll down and select System Administration. 4. Select Common Settings. 5. Scroll down and select Operation Time Out. 6. Select Off. Parent topic: Using the Control Panel Product Parts Locations See these sections to identify the parts on your product.
Product Parts - Top 1 ADF cover 2 Automatic Document Feeder (ADF) 3 Edge guide 4 ADF input tray 5 ADF output tray 6 Paper cassette 1 7 Paper cassette cover (WF-4640) 8 Paper cassette 2 (WF-4640) 27
1 Edge guides 2 Paper stopper 3 Output tray extension 4 Output tray 5 Edge guides 6 Rear paper feed slot 7 Feeder guard 28
1 Document cover 2 Scanner glass 3 Control panel 4 USB Type A port for external devices Parent topic: Product Parts Locations Product Parts - Inside 29
1 Ink cartridge slots 2 Front cover 3 Print head Parent topic: Product Parts Locations Product Parts - Back 1 Line port 2 EXT port 3 USB port 4 LAN port 5 Service USB port (do not remove sticker) 6 Maintenance box 7 Rear cover 8 AC inlet Parent topic: Product Parts Locations 30
Using Eco Mode and Other Power Saving Settings Your product enters sleep mode automatically and turns off the LCD screen if it is not used for a period of time. You can make the time period shorter and select other options to save energy and resources. Changing the Eco Settings Changing the Sleep Timer Settings Changing the Power Off Timer Settings Parent topic: Product Basics Changing the Eco Settings You can use the product's control panel to change the Eco settings.
4. Select Configure. 5. Change any settings as necessary. 6. Select OK to exit. Parent topic: Using Eco Mode and Other Power Saving Settings Changing the Sleep Timer Settings You can adjust the time period before your product enters sleep mode and turns off the LCD screen. Note: This setting can be locked by an administrator. If you cannot access or change this setting, contact your administrator for assistance. The Sleep Timer setting in Eco Mode overrides this Sleep Timer setting. 1.
• Press the number of minutes on the LCD screen, select the number of minutes from the on-screen keypad, then press . 7. Select OK. Parent topic: Using Eco Mode and Other Power Saving Settings Changing the Power Off Timer Settings You can have the product turn off automatically if it is not used for a specified period of time. Note: This setting can be locked by an administrator. If you cannot access or change this setting, contact your administrator for assistance. 1. Press the home button, if necessary.
Epson Connect Solutions for Smartphones, Tablets, and More You can print documents, photos, emails, and web pages from your home, office, or even across the globe. You can use your smartphone, tablet, or computer. Epson offers these solutions to print and scan from anywhere: Epson Email Print, Epson iPrint Mobile App, Epson Remote Print, and Epson Scan to Cloud.
2. Visit epson.com/connect to learn more about Epson iPrint and check the compatibility of your mobile device. 3. Download Epson iPrint from the Apple App Store or Google Play. 4. Connect your mobile device to the same wireless network that your product is using. 5. Print from your mobile device to your Epson product.
5. Click Add, then follow the instructions on the screen to create your destination list. 6. When you're ready to scan, select the setting for the Scan to Cloud service on your product control panel. Parent topic: Epson Connect Solutions for Smartphones, Tablets, and More Related topics Wi-Fi or Wired Networking Using AirPrint AirPrint allows you to wirelessly print to your AirPrint-enabled product from iPhone, iPad, and iPod touch running the latest version of iOS. 1.
2. Print a network status sheet. 3. Locate your product's IP address on the network status sheet. 4. Enter the IP address into the address bar of a web browser. 5. Select the Google Cloud Print Services option. Note: If you don't see the Google Cloud Print Services option, turn your product off and back on. If the option still doesn't appear, select the Firmware Update option and follow the on-screen instructions to update your product. 6. Click Register. 7.
Wi-Fi or Wired Networking See these sections to use your product on a Wi-Fi or wired network. Wi-Fi Infrastructure Mode Setup Wi-Fi Direct Mode Setup Wi-Fi Protected Setup (WPS) Printing a Network Status Sheet Changing or Updating Network Connections Wi-Fi Infrastructure Mode Setup You can set up your product to communicate with your computer using a wireless router or access point. The wireless router or access point can be connected to your computer over a wireless or wired network.
3 Computer with a wireless interface 4 Computer 5 Internet 6 Ethernet cable (used only for wired connection to the wireless router or access point) Selecting Wireless Network Settings From the Control Panel Parent topic: Wi-Fi or Wired Networking Selecting Wireless Network Settings From the Control Panel You can select or change wireless network settings using your product control panel.
4. Select Wi-Fi Setup Wizard. Note: If you need to disable the wireless network to set up your product on an Ethernet network, scroll down and select Disable Wi-Fi instead. Then follow the instructions on changing to a wired network connection in this guide. 5. Select the name of your wireless network or enter the name manually. Note: To enter the wireless network name manually, select Other Networks and select the Network (SSID) field. Use the displayed keypad to enter your network name. 6.
7. Press when you finish entering your password and select Proceed. 8. Confirm the displayed network settings and select OK to save them. Note: If you need to change a setting, press the back button. 9. If you want to print a network setup report, press one of the 10. Press the buttons. (Otherwise, select Done.) home button to return to the Home screen. If the network connection is successful, the Wi-Fi icon in the upper-right corner of the LCD screen is lit as shown.
Wi-Fi Direct Mode Setup You can set up your product to communicate directly with your computer or another device without requiring a wireless router or access point.
Parent topic: Wi-Fi or Wired Networking Enabling Wi-Fi Direct Mode You can enable Wi-Fi Direct mode to allow direct communication between your product and computer or other devices without a wireless router or access point. 1. Press the 2. Press home button, if necessary. . 3. Select Wi-Fi Setup. You see a screen like this: 4. Scroll down and select Wi-Fi Direct Setup. 5. Select Connection Setup. 6. Select Change Password and select Yes.
7. Enter your Wi-Fi Direct password. Note: Your password must be at least 8 and no more than 22 characters long. • Press or to move the cursor. • Press to change the case of letters. • Press to delete the previous character. • Press to enter numbers and symbols. • Press 8. Press to enter a space. when you finish entering your password.
You see a screen like this: 9. Scroll down to view the SSID (Wi-Fi network name) and password. 10. Use your computer or wireless device to select the Wi-Fi network name (SSID) displayed on the LCD screen, then enter the password shown. 11. Press the home button to return to the Home screen. You see either an AP or Direct connection symbol on the LCD screen and should be able to print directly to your product from your computer or device.
Using WPS to Connect to a Network Parent topic: Wi-Fi or Wired Networking Using WPS to Connect to a Network If you have a WPS-enabled wireless router or access point, you can use Wi-Fi Protected Setup (WPS) to connect your product to the network. 1. Press the 2. Press home button, if necessary. . 3. Select Wi-Fi Setup. You see a screen like this: 4. Select Push Button Setup (WPS). 5. Follow the instructions on the LCD screen to complete WPS setup. 6. Press the home button to return to the Home screen.
If the network connection is successful, the Wi-Fi icon in the upper-right corner of the LCD screen is lit as shown. Parent topic: Wi-Fi Protected Setup (WPS) Printing a Network Status Sheet You can print a network status sheet to help you determine the causes of any problems you may have using your product on a network. 1. Press the home button, if necessary. 2. Select Setup.
You see a screen like this: 3. Select Network Status. 4. Select Wi-Fi/Network Status. You see a screen like this: Note: If you are connected to a wireless network, the signal strength is also displayed. 5. Select Print. 6. Press one of the buttons to print the network status sheet.
Examine the settings shown on the network status sheet to diagnose any problems you have. Parent topic: Wi-Fi or Wired Networking Changing or Updating Network Connections See these sections to change or update how your product connects to a network.
1. Do one of the following: • If you want to use only a Wi-Fi connection, disconnect the USB cable from your product. With Windows, also uninstall your product software. • If you want to add a Wi-Fi connection in addition to a USB connection, leave the USB cable connected to your product. 2. Download your product software from the Epson website, or install it from the CD that came with your product using the instructions on the Start Here sheet.
2. Download your product software from the Epson website, or install it from the CD that came with your product using the instructions on the Start Here sheet. Parent topic: Changing or Updating Network Connections Related tasks Uninstalling Product Software - Windows Disabling Wi-Fi Features You may need to disable your product's Wi-Fi features if you change your network connection type or need to solve a problem with your network connection.
Loading Paper Before you print, load paper for the type of printing you will do. Loading Paper in the Cassette Loading Paper and Envelopes in the Rear Paper Feed Slot Paper Loading Capacity Available Epson Papers Selecting the Paper Settings for Each Source - Control Panel Selecting Default Paper Settings - Administrator Loading Paper in the Cassette You can load plain paper in these sizes in the paper cassette: • Letter (8.5 × 11 inches [216 × 279 mm]) • A4 (8.3 × 11.7 inches [210 × 297 mm]) • Legal (8.
2. Pull out the paper cassette. If you are loading paper in cassette 2 (WF-4640), remove the paper cassette cover. 3. Slide the edge guides outward. Note: If you are using legal-size paper, squeeze the tab and extend the paper cassette.
4. Set the front edge guide to the paper size you are using. 5. Load a stack of paper, printable side down, against the edge guide as shown. Note: Make sure the paper is loaded against the edge guide and not sticking out from the end of the cassette.
6. Slide the edge guides against the paper, but not too tightly. If you are loading paper in cassette 2 (WF-4640), reattach the paper cassette cover. Note: Make sure the paper fits beneath the top edges of the guide. Caution: To prevent paper feeding problems, make sure you do not load too much paper in the cassette. 7. Keep the cassette flat as you gently insert it. 8. Select the size and type of paper you just loaded on the product LCD screen.
9. Extend the output tray and open the paper stopper. Note: If you are using legal-size or longer paper, do not open the paper stopper. Do not remove or insert the paper cassette during printing. Always follow these paper loading guidelines: • Load only the recommended number of sheets. • Load paper short edge first, no matter which way your document faces. • Load the printable side facedown. • Load letterhead or pre-printed paper top edge first.
1. Extend the output tray and open the paper stopper. Note: If you are using legal-size or longer paper, do not open the paper stopper. 2. Pull up the paper support for the rear paper feed slot.
3. Flip the feeder guard forward, then slide the edge guides outward. 4. If you are inserting a stack of paper, fan the sheets first and tap the stack on a flat surface to even the edges. Note: You can load one sheet of binder paper with holes on one of the long edges as shown. Do not select automatic 2-sided printing for this type of paper.
5. Do one of the following: • Insert paper, glossy or printable side up and short edge first, in the center of the tray. Caution: To prevent paper feeding problems, make sure you do not load too much paper in the slot. • Load envelopes short edge first, with the flap facing down and the flap edge to the left, in the center of the slot.
6. Slide the edge guides against the paper, but not too tightly. 7. Select the size and type of paper you just loaded in the Paper Setup menu. Always follow these paper loading guidelines: • Load only the recommended number of sheets. • Load paper short edge first, no matter which way your document faces. • Load the printable side faceup. • Load letterhead or pre-printed paper top edge first. • Do not load paper above the arrow mark inside the edge guides.
Paper Loading Capacity Paper type Loading capacity - paper cassette Loading capacity - rear paper feed slot Plain paper 250 sheets 80 sheets Letter (8.5 × 11 inches [216 × 279 mm]) and A4 (8.3 × 11.7 inches [210 × 297 mm]) 250 sheets 1 sheet Legal (8.5 × 14 inches [216 × 357 mm]) Epson Bright White Paper 200 sheets 50 sheets 20 sheets for manual two-sided printing Epson Presentation Paper Matte — 80 sheets Thick paper (cardstock up to 68 lb [256 g/m2]) — 10 sheets Letter (8.
Paper type Loading capacity - paper cassette Epson Premium Presentation Paper — Matte Loading capacity - rear paper feed slot 20 sheets Epson Premium Presentation Paper Matte Double-sided Epson Ultra Premium Presentation Paper Matte Epson Brochure & Flyer Paper Matte Double-sided Epson Photo Paper Glossy Epson Premium Photo Paper Glossy Epson Ultra Premium Photo Paper Glossy Epson Premium Photo Paper Semigloss Envelopes — 10 envelopes Parent topic: Loading Paper Available Epson Papers You can purcha
Paper Type Size Part number Sheet count Epson Presentation Paper Matte Letter (8.5 × 11 inches [216 × 279 mm]) S041062 100 Legal (8.5 × 14 inches [216 × 357 mm]) S041067 100 8 × 10 inches (203 × 254 mm) S041467 50 Letter (8.5 × 11 inches [216 × 279 mm]) S041257 50 S042180 100 Letter (8.5 × 11 inches [216 × 279 mm]) S041568 50 Epson Ultra Premium Presentation Letter (8.
Paper Type Size Part number Sheet count Epson Premium Photo Paper Semi-gloss 4 × 6 inches (102 × 152 mm) S041982 40 Letter (8.5 × 11 inches [216 × 279 mm]) S041331 20 Parent topic: Loading Paper Selecting the Paper Settings for Each Source - Control Panel You can change the default paper size and paper type for each source using the control panel on the product. 1. Press the home button, if necessary. 2. Select Setup. You see a screen like this: 3. Select Paper Setup. 4.
You see a screen like this: 5. Select Paper Size. 6. Select the paper size you loaded. 7. Select Paper Type. 8. Select the paper type you loaded. 9. Select OK. 10. Select another paper source to change or press home to return to the Home screen.
For this paper Select this Paper Type or Media Type setting Letterhead paper Letterhead Recycled paper Recycled Color paper Color Preprinted paper Preprinted Envelopes Envelope Epson Ultra Premium Photo Paper Glossy Ultra Glossy Epson Premium Photo Paper Glossy Prem. Glossy Epson Photo Paper Glossy Glossy Epson Premium Photo Paper Semi-gloss Prem. Semi-Gloss Epson Premium Presentation Paper Matte Prem.
Note: These settings can be locked by an administrator. If you can't access these settings, contact your administrator for assistance. 1. Press the home button, if necessary. 2. Select Setup. You see a screen like this: 3. Scroll down and select System Administration. Enter the administrator password, if necessary.
4. Select Printer Settings. 5. Select the Paper Source Settings options you want to use. 6. Select one of these Auto Error Resolver options: • Turn on this setting to display a warning and print on one side of paper only when a 2-sided printing error occurs, or to print the data that the printer could process when a memory full error occurs. • Turn off this setting to display an error message and stop printing if an error occurs. 7. When you are finished, press the home button to return to the Home screen.
Note: These settings can be locked by an administrator. If you can't access these settings, contact your administrator for assistance. 1. Press the home button, if necessary. 2. Select Setup. You see this screen: 3. Scroll down and select System Administration. Enter the administrator password, if necessary.
4. Select Universal Print Settings. 5. Adjust the settings as necessary. 6. When you are finished, press the home button to return to the Home screen. Universal Print Settings Options Parent topic: Selecting Default Paper Settings - Administrator Universal Print Settings Options Select the Universal Print Settings you want to use. Universal Print Settings option Available settings Description Top Offset — Adjusts the top or left margin.
Placing Originals on the Product Follow the instructions here to place your original documents or photos on the product. Caution: Do not place anything on top of your product or use its cover as a writing surface to avoid damaging it. Placing Originals on the Scanner Glass Placing Originals in the Automatic Document Feeder Placing Originals on the Scanner Glass You can place originals up to this size on the scanner glass: Letter (8.5 × 11 inches [216 × 279 mm]) or A4 (8.3 × 11.7 inches [210 × 297 mm]). 1.
Related topics Copying Scanning Faxing Placing Originals in the Automatic Document Feeder You can place multi-page original documents in the Automatic Document Feeder (ADF).You can also use the ADF to scan both sides of a 2-sided document. Make sure the originals meet the Automatic Document Feeder specifications before loading them. Caution: Make sure your originals are not creased or folded, and do not contain holes, staples, tape, or other materials that could obstruct the feeder. 1.
3. Insert the originals into the ADF faceup and top-edge first. The ADF icon on the control panel lights up. 4. Slide the ADF edge guide against the originals, but not too tightly.
Note: If you are copying two originals onto one sheet, make sure the originals are loaded as shown: Parent topic: Placing Originals on the Product Related references Automatic Document Feeder (ADF) Specifications Related topics Copying Scanning Faxing 74
Copying See the information here to copy documents or photos using your product. Note: Copies may not be exactly the same size as your originals. Copying Documents or Photos Copying Options Copying Documents or Photos You can copy documents or photos onto various sizes and types of paper, including Epson special papers. 1. Place your original document or photo on the scanner glass, or place multi-page documents in the ADF. 2. Load the paper you want to print on. 3. Press the home button, if necessary. 4.
6. Change any of the displayed settings as necessary. 7. Select Settings to view and change additional copy settings, if necessary. Then press the button back 8. Select Preview to preview your copy on the LCD screen. 9. Select Preset to save your copy settings. Note: Presets can be locked by an administrator. If you can't access or change this setting, contact your administrator for assistance. 10. When you are ready to copy, press one of the Note: To cancel printing, press the buttons.
Copying option Available settings Description Layout With Border Leaves a small margin around the image or document 2-up Copy Copies multiple page documents onto one sheet. Also, select Settings and change the Document Orientation and Layout Order settings as necessary. 4-up ID Card Copies both sides of an ID card onto one side of a sheet of paper Document Size Various sizes Select the document size of your original Paper Source Various sources Select the paper source that you want to use.
Copying option Available settings Remove Shadow Off On Remove Punch Holes Off Collate Copy Off Select On to erase the shadows that appear in the center of a document when copying a book or that appear around a document when copying thick paper Select On to erase the binding holes on a document On On Dry Time Description Standard Long Select On to print multiple copies of a multi-page document both in order and sorted into sets Select to adjust the drying time for 2-sided copies, if smudges or mar
Printing From a Computer Before printing from your computer, make sure you have set up your product and installed its software as described on the Start Here sheet. Note: If you have an Internet connection, it is a good idea to check for updates to your product software on Epson's support website. If you see a Software Update screen, select Enable automatic checking and click OK. The update scans your system to see if you have the latest product software. Follow the on-screen instructions.
3. If necessary, select your product name as the printer you want to use. Note: You may also need to select Properties or Preferences to view your print settings. You see the Main tab of your printer settings window: 4. For the Paper Source setting, select where you loaded the paper you want to print on. 5. Select the size of the paper you loaded as the Document Size setting. 6. Select the orientation of your document. Note: If you are printing an envelope, select Landscape.
7. Select the type of paper you loaded as the Paper Type setting. Note: The setting may not exactly match the name of your paper. Check the paper type settings list for details. 8. Select the Quality setting that matches the print quality you want to use. 9. Select a Color option: • To print a color document or photo, select the Color setting. • To print text and graphics in black or shades of gray, select the Black/Grayscale setting. 10.
Cassette Selects the paper in the cassette as the paper source. Rear Paper Feed Slot Selects the paper in the rear feed slot as the paper source. WF-4640 Auto Select Automatically selects the paper source based on the selected paper size. Paper Cassette 1 Selects the paper in cassette 1 as the paper source. Paper Cassette 2 Selects the paper in cassette 2 as the paper source. Rear Paper Feed Slot Selects the paper in the rear feed slot as the paper source.
2-Up and 4-Up Prints 2 or 4 pages on one sheet of paper. Click the Page Order button to select page layout and border options. 2×1 Poster, 2×2 Poster, 3×3 Poster, 4×4 Poster Prints one image on multiple sheets of paper to create a larger poster. Click the Settings button to select image layout and guideline options.
You see this window: 4. Select the double-sided printing options you want to use. 5. Click OK to return to the Main tab. 6. Click the Print Density button.
You see this window: 7. Select the type of document you are printing as the Document Type setting. The software automatically sets the Adjustments options for that document type. 8. If necessary, select the Adjustments options you want to use. 9. Click OK to return to the Main tab. 10. Print a test copy of your double-sided document to test the selected settings. 11. Follow any instructions displayed on the screen during printing.
Binding Margin Options Select options that define a wider margin to allow for binding. Start Page Selects whether printing starts on the front or back page. Create Folded Booklet Options Select the Booklet checkbox and a binding option to print double-sided pages as a booklet.
Selecting Additional Layout and Print Options - Windows You can select a variety of additional layout and printing options for your document or photo on the More Options tab. 1. To change the size of your printed document or photo, select the Reduce/Enlarge Document checkbox and select one of these sizing options: • Select the Fit to Page option to size your image to fit the paper you loaded.
• Select Custom and click the Advanced button to manually adjust the color correction settings or turn off color management in your printer software. • Select Image Options to access additional settings for improving printed images. 3. To add the following features, click the Watermark Features button: • Anti-Copy Pattern: adds a watermark that only appears when your printout is copied. • Watermark: adds a visible watermark to your printout.
Custom Color Correction Options - Windows You can select any of the available options in the Color Correction window to customize the image colors for your print job. Color Controls Lets you select a Color Mode setting, individual settings for Brightness, Contrast, Saturation, and Density, and individual color tones. Depending on the selected color mode, you can also adjust the midtone density using the Gamma setting. Fix Photo Improves the color, contrast, and sharpness of flawed photos.
ICM Lets you manage color using installed color printing profiles. No Color Adjustment Turns off color management in your printer software so you can manage color using only your application software. Parent topic: Selecting Additional Layout and Print Options - Windows Image Options and Additional Settings - Windows You can select any of the Image Options and Additional Settings to customize your print. Some options may be pre-selected or unavailable, depending on other settings you have chosen.
Note: These settings are not saved with your document. You can select to print the following information, which comes from the Windows Control Panel on your computer: • User Name • Computer Name • Date • Date/Time Parent topic: Selecting Additional Layout and Print Options - Windows Selecting a Printing Preset - Windows For quick access to common groups of print settings, you can select a printing preset on the Main or More Options tab.
You see the available Printing Presets on the left: 2. Place your cursor over one of the Printing Presets to view its list of settings. 3. Use any of the available options on the screen to control your printing presets. 4. To choose an option for printing, select it. 5. Click OK.
Selecting Extended Settings - Windows You can select additional settings that apply to all the print jobs you send to your product. 1. Access the Windows Desktop and right-click the product icon in the Windows taskbar. 2. Select Printer Settings. 3. Click the Maintenance tab. You see the maintenance options: 4. Click the Extended Settings button.
You see this window: 5. Select any of the extended settings to customize your print. 6. Click OK to close the Extended Settings window. 7. Click OK to close the printer software window. Extended Settings - Windows Parent topic: Printing with Windows Extended Settings - Windows You can select from these settings on the Extended Settings window. Enable EPSON Status Monitor 3 Enables product monitoring for ink and paper supplies and other issues.
Page Rendering Mode Increases print speed when printing is extremely slow or the print head stops during printing. Print as Bitmap Increases print speed when printing is extremely slow or the print head stops during printing, and other settings do not help. Skip Blank Page Ensures that your product does not print pages that contain no text or images. Change Standard Resolution Reduces the resolution of print data to correct printing problems.
You see your application's Print window, such as this one: 2. Click OK or Print to start printing. Parent topic: Printing with Windows Selecting Default Print Settings - Windows When you change your print settings in a program, the changes apply only while you are printing in that program session. If you want to change the print settings you use in all your Windows programs, you can select new default print settings. 1. Access the Windows Desktop and right-click the product icon in the Windows taskbar. 2.
You see the printer settings window: 3. Select the print settings you want to use as defaults in all your Windows programs. 4. Click OK. These settings are now the defaults selected for printing. You can still change them as needed for printing in any program session. Changing the Language of the Printer Software Screens Parent topic: Printing with Windows Changing the Language of the Printer Software Screens You can change the language used on the Windows printer software screens. 1.
3. Click the Maintenance tab. You see the maintenance options: 4. Select the language you want to use as the Language setting. 5. Click OK to close the printer software window. The printer software screens appear in the language you selected the next time you access them. Parent topic: Selecting Default Print Settings - Windows Changing Automatic Update Options Your printer software for Windows automatically checks for updates to the product software.
You see this window: 3. Do one of the following: • To change how often the software checks for updates, select a setting in the Check every menu. • To disable the automatic update feature, select the Never option. 4. Click OK to exit. Note: If you choose to disable the automatic update feature, you can check for updates manually.
Selecting Double-sided Printing Settings - OS X Managing Color - OS X Selecting Printing Preferences - OS X Printing Your Document or Photo - OS X Parent topic: Printing From a Computer Selecting Basic Print Settings - OS X Select the basic settings for the document or photo you want to print. 1. Open a photo or document for printing. 2. Select the print command in your application. Note: You may need to select a print icon on your screen, the Print option in the File menu, or another command.
You see the expanded printer settings window for your product: Note: The print window may look different, depending on the version of OS X and the application you are using. 5. Select the Copies and Pages settings as necessary. Note: If you do not see these settings in the print window, check for them in your application before printing.
6. Select the page setup options: Paper Size and Orientation. Note: If you do not see these settings in the print window, check for them in your application before printing. They may be accessible by selecting Page Setup from the File menu. 7. Select any application-specific settings that appear on the screen, such as those shown in the image above for the Preview application. 8. Select Print Settings from the pop-up menu.
9. Select the Paper Source you wish to print from. 10. Select the type of paper you loaded as the Media Type setting. Note: The setting may not exactly match the name of your paper. Check the paper type settings list for details. 11. Select the Print Quality setting you want to use. 12. Select any of the available print options.
Rear Paper Feed Slot Selects the paper in the rear feed slot as the paper source. Parent topic: Selecting Basic Print Settings - OS X Print Quality Options - OS X You can select any of the available Print Quality options to fine-tune the quality of your print. Some settings may be unavailable, depending on the paper type setting you have chosen. Draft For draft printing on plain paper. Normal For everyday text and image printing.
Selecting Page Setup Settings - OS X Depending on your application, you may be able to select the paper size and orientation settings from the print window. Note: If you do not see these settings in the print window, check for them in your application before printing. They may be accessible by selecting Page Setup from the File menu. 1. Select the size of the paper you loaded as the Paper Size setting. 2. Select the orientation of your document or photo as shown in the print window.
Selecting Print Layout Options - OS X You can select a variety of layout options for your document or photo by selecting Layout from the popup menu on the print window. • To print multiple pages on one sheet of paper, select the number of pages in the Pages per Sheet pop-up menu. To arrange the print order of the pages, select a Layout Direction setting. • To print borders around each page on the sheet, select a line setting from the Border pop-up menu.
Selecting Double-sided Printing Settings - OS X You can print on both sides of the paper by selecting Two-sided Printing Settings from the pop-up menu on the print window. Note: Some options may be pre-selected or unavailable, depending on other settings you have chosen or if you are accessing the product over a network. This screen may be different, depending on the version of OS X you are using. 1. Select one of the Two-sided Printing options.
2. Select the type of document you are printing as the Document Type setting. The software automatically sets the Adjustments options for that document type. 3. If necessary, customize the Adjustments settings as instructed on the screen. 4. Print a test copy of your double-sided document to test the selected settings. 5. Follow any instructions displayed on the screen during printing.
Two-sided Printing Options Long-Edge binding Orients double-sided printed pages to be bound on the long edge of the paper. Short-Edge binding Orients double-sided printed pages to be bound on the short edge of the paper. Adjustments Print Density Sets the level of ink coverage for double-sided printing. Increased Ink Drying Time Sets the amount of time required for drying ink after printing on one side of the paper before printing the other side in double-sided printing.
3. Select Color Options from the pop-up menu in the print window. Note: The available settings on the Color Options menu depend on the option you selected on the Color Matching menu. 4. Select one of the available options. Color Matching and Color Options - OS X Parent topic: Printing with OS X Color Matching and Color Options - OS X You can select from these settings on the Color Matching and Color Options menus.
Color Options Settings Manual Settings Lets you select manual color adjustments. Click the arrow next to Advanced Settings and select settings for Brightness, Contrast, Saturation, and individual color tones. You can also select a color Mode setting for printing photos and graphics and the Fix Red-Eye setting to reduce or remove redeye in photos. Depending on the selected color mode, you can also adjust the midtone density using the Gamma setting.
You see a screen like this: 4. Select any of the available printing preferences. 5. Click OK. Printing Preferences - OS X Parent topic: Printing with OS X Printing Preferences - OS X You can select from these settings on the Options or Driver tab. Note: Automatic Cassette Switching is available only if your product has two cassettes. Thick paper and envelopes Prevents ink from smearing when you print on envelopes or other thick paper.
Permit temporary black printing Allows you to print using black ink when a color ink cartridge is expended. Automatic Cassette Switching Automatically switches to the other cassette when one of the cassettes runs out of paper. High Speed Printing Speeds up printing, but may reduce print quality. Warning Notifications Lets you choose whether or not to receive warning notifications from the printer software for various operating conditions.
Parent topic: Printing with OS X Checking Print Status - OS X During printing, you can view the progress of your print job, control printing, and check ink cartridge status. 1. Click the printer icon when it appears in the Dock. You see the print status window: 2. Select the following options as necessary: OS X 10.5/10.6/10.7: • To cancel printing, click the print job and click the Delete icon. • To pause a print job, click the print job and click the Hold icon.
Cancelling Printing Using a Product Button If you need to cancel printing, press the Stop button on your product.
Scanning You can scan original documents or photos and save them as digital files. Starting a Scan Selecting Epson Scan Settings Scanning with OS X Using Image Capture Scanning Special Projects Starting a Scan After placing your original documents or photos on your product for scanning, start scanning using one of these methods.
4. Select Scan. You see a screen like this: 5. Select one of the following Scan to options: • Memory Device saves your scan file on a memory or USB device and lets you select the file format, quality, and other settings. • Cloud sends your scanned files to a destination that you have registered with Epson Connect. • Document Capture Pro allows you to scan over a network using your saved job settings in Document Capture Pro or Document Capture.
Parent topic: Starting a Scan Related tasks Using Epson Scan to Cloud Using Presets Related topics Placing Originals on the Product Adding and Assigning Scan Jobs You can view, change, or add available default scan settings when you scan using the Document Capture Pro option on the product control panel. You do this by accessing the scan jobs in the Document Capture Pro (Windows) or Document Capture (OS X) program. 1. Start Document Capture Pro or Document Capture on a computer connected to the product. 2.
5. Select the jobs that you want to assign to any of the pull-down menus, click OK, then click OK again. You can now use the added scan jobs when you scan from the product control panel. Parent topic: Starting a Scan Using the Product Control Panel Starting a Scan with Document Capture Pro or Document Capture When you scan with Document Capture Pro (Windows) or Document Capture (OS X), the program automatically saves your scanned file on your computer in the folder you specify.
You see a window like this: 2. Click the Scan icon.
You see a window like this: Note: With OS X 10.6, 10.7, 10.8, or 10.9, you can download and install Epson Scan scanning software, which will provide additional image adjustment features within Document Capture. To download Epson Scan, visit Epson's driver download site (U.S. downloads or Canadian downloads).
• OS X: If you installed Epson Scan, close the Scan Settings window, open the Scan menu at the top of the screen and select Displays the EPSON Scan Setup Screen. Click the Scan icon. Select any displayed scan settings you want to use and click OK. 5. Click Scan. You see a preview of your scan in the Document Capture Pro or Document Capture window. 6. Check the scanned images and edit them as necessary. 7. Click one of the Destination icons to choose where to save your scanned file.
You see an Epson Scan window like this: Parent topic: Starting a Scan Related tasks Scanning with OS X Using Image Capture 123
Related topics Placing Originals on the Product Selecting Epson Scan Settings Starting a Scan from a Scanning Program You can start Epson Scan from a scanning program to select scan settings, scan, and open the scanned image in the program. Note: With OS X 10.6, 10.7, 10.8, or 10.9, in addition to scanning with Image Capture, you can download and install Epson Scan scanning software.
You see an Epson Scan window like this: Note: Epson Scan may start in a different mode when you first access it.
Related topics Placing Originals on the Product Selecting Epson Scan Settings After starting Epson Scan, you can select settings in various modes to customize your scan. Scan Modes Selecting the Scan Mode Scanning in Office Mode Scanning in Professional Mode Image Preview Guidelines Scan Resolution Guidelines Selecting Scan File Settings Parent topic: Scanning Scan Modes Epson Scan provides a choice of scan modes with different levels of control over your settings.
Parent topic: Selecting Epson Scan Settings Scanning in Office Mode When you scan in Office Mode, Epson Scan automatically saves your scanned file in PDF format in your operating system's Documents or My Documents folder, or opens it in your scanning program. You can select settings, preview, and change the scanned file settings as necessary. 1. Start Epson Scan and select Office Mode as the Mode setting.
You see this window: 2. Select the Document Source setting indicating where you placed your original. To scan a 2-sided document in the ADF, select ADF-Double-sided. Note: If you are using the ADF, remove any documents from the scanner glass.
3. Select the Size and Orientation settings that match your original. 4. To scan both sides of a 2-sided original into one image, select a Stitch Images setting. Note: To use the Stitch Images setting, you must select ADF-Double-sided as the Document Source setting. 5. To allow Epson Scan to detect and correct any skew in your original, select Correct Document Skew. 6. To rotate your original in your scan, select a Rotate setting. 7. Select the Image Type setting that matches your original. 8.
Scan Resolution Guidelines Related tasks Selecting Scan File Settings Scanning in Professional Mode Available Document Source Settings - Office Mode You can select these Document Source options in Epson Scan Office Mode. Scanner Glass Selects the scanner glass as the location where the originals are placed on your product for scanning. ADF - Single-sided Selects the Automatic Document Feeder as the location where the originals are placed on your product for single-sided scanning.
1. In the Preview window, click the preview image. Auto Locate icon to create a marquee (dotted line) on the 2. Do the following, as necessary, to work with the selected scan area: • If the marquee is correct, continue with the next step. • To move the marquee, click inside the scan area and drag the marquee where you want it.
• To resize the scan area, place your cursor over the edge or corner of the marquee, then click and drag the edges where you want them. (Hold down the Shift key as you resize the marquee to retain the same width/height proportions.) • To create additional marquees (up to 50, if available), click the existing marquee and paste it on the preview image. Copy Marquee icon to copy the Note: If you draw multiple marquees, make sure you select the All button in the Preview window before you scan.
Available Image Adjustments - Office Mode You can select these Image Adjustments options in Epson Scan Office Mode. Not all adjustment settings may be available, depending on other settings you have chosen. Note: Select the Image Option checkbox if you need to set any of the grayed-out image adjustments beneath the checkbox. Unsharp Mask Makes the edges of certain image areas clearer. Turn off this option to leave softer edges.
Skip Blank Pages Ensures that your product does not scan pages that contain no text or images. Edge Fill Corrects shadowing around the edges of the image by filling the shadows with the color you select. Brightness Adjusts the overall lightness and darkness of the scanned image. Contrast Adjusts the difference between the light and dark areas of the overall scanned image.
2. Select the Document Type setting that matches your original, such as Reflective for documents or photos. 3. Select the Document Source setting indicating where you placed your original. To scan a 2-sided document in the ADF, select ADF - Double-sided. Note: If you are using the ADF, remove any documents from the scanner glass. 4. Select the specific type of original you are scanning as the Auto Exposure Type setting: Document or Photo. 5.
Related concepts Image Preview Guidelines Scan Resolution Guidelines Related tasks Selecting Scan File Settings Scanning in Office Mode Available Document Source Settings - Professional Mode You can select these Document Source options in Epson Scan Professional Mode. Scanner Glass Selects the scanner glass as the location where the originals are placed on your product for scanning.
You can also use the scan area to select specific Image Adjustments settings for a scanned image. Just be sure to click inside the scan area before selecting the settings. Note: In Professional Mode, the default Preview mode is Normal mode. To use Thumbnail Preview mode instead, click the Thumbnail tab. 1. Do one of the following to select your scan area in the Preview image: • Normal preview: Click the image.
• Thumbnail preview: Your scan area is selected automatically, but you can change it. Place your cursor in one corner of the desired scan area, then click and drag the cursor to the opposite corner to create a marquee (dotted line) on the preview image. 2. Do the following, as necessary, to work with the selected scan area: • If the marquee is correct, continue with the next step. • To move the marquee, click inside the scan area and drag the marquee where you want it.
• To resize the scan area, place your cursor over the edge or corner of the marquee, then click and drag the edges where you want them. (Hold down the Shift key as you resize the marquee to retain the same width/height proportions.) • Normal preview: To create additional marquees (up to 50, if available), click the Marquee icon to copy the existing marquee and paste it on the preview image. • To delete a marquee, click the marquee, then click the Copy Delete Marquee icon.
Click the image adjustment icon to access additional settings. Click the + (Windows) or (OS X) icon next to a setting to change the level of adjustment. Unsharp Mask Makes the edges of certain image areas clearer. Turn off this option to leave softer edges. Descreening Removes the ripple pattern that might appear in subtly shaded image areas, such as skin tones. This option improves results when scanning magazines or newspapers.
Saturation Adjusts the density of colors in the overall image. Color Balance Adjusts the balance of colors in the overall image. Color Palette Provides a graphical interface for adjusting mid-tone levels, such as skin tones, without affecting the highlight and shadow areas of the image. (For advanced users only.) Click the to access the settings.
A marquee (dotted line) appears on your preview image proportioned for the size you selected. 3. Do the following, as necessary, to work with the selected scan area: • To move the marquee, click inside the scan area and drag the marquee where you want it. • To resize the scan area, place your cursor over the edge or corner of the marquee, then click and drag the edge where you want it. Note: Manually adjusting the marquee will not change the target size of the scanned file.
4. To create a scanned image size that is not available in the Target Size list, click the Customize option. 5. Name the custom size, enter the size, click Save, and click OK. Then create a scan area on the preview image. The marquee is automatically proportioned for your custom scan size. 6. To use additional sizing tools, click the + (Windows) or and select options as desired. (OS X) icon next to the Target Size setting • Scale: Reduces or enlarges your image by the percentage you enter.
• Trimming: Turns automatic image cropping on or off. • Unlock icon: Unlocks the width/height proportions of the scanned image size so you can adjust it without constraint. Parent topic: Scanning in Professional Mode Image Preview Guidelines You can preview your scanned image so you can adjust the scan settings using the preview as a guide.
• Fax: 200 dpi Parent topic: Selecting Epson Scan Settings Selecting Scan File Settings You can select the location, name, and format of your scan file on the File Save Settings window. You can also select various optional settings that control how Epson Scan behaves when you scan and save files.
The File Save Settings window may appear after you click Scan on the Epson Scan window. You may also be able to access the window by clicking the icon on the Epson Scan window. 1. Do one of the following to select the folder in which you want to save your scanned image: • Click the button for one of the displayed folders. • Click the Other button, click the Browse or Choose button, and select a folder. 2.
• If you need to delete or reorder the scanned pages, click Edit page. Delete or reorder the pages using the icons that appear on the bottom of the editing window. When you are finished, click OK. Note: If you installed an OCR (Optical Character Recognition) program, you may see a screen indicating the program is converting your page to text. Wait until the program re-scans the page and close the program, if necessary.
Show this dialog box before next scan Select to have the File Save Settings window appear automatically before you scan. Open image folder after scanning Select to have Windows Explorer or OS X Finder automatically open to the folder where your scanned image is saved after scanning. Show Add Page dialog after scanning If you are scanning a multi-page document using the PDF or Multi-Tiff format, select to display a prompt for scanning additional pages after the first page is scanned.
4. Select the Scan Mode setting indicating where you placed your original (if available). Select any other scan settings as necessary.
Note: If you are scanning a multi-page document in the ADF, you can have Image Capture combine all the pages into a single document. After all pages have been scanned, you see the message No document loaded. . . . 5. Select the folder in which you want to save your scanned file in the Scan To pop-up menu. 6. Click Scan. Your scanned file is saved in the folder you selected.
Scanning Special Projects Your product's scanning software offers various options to help you quickly complete special scan projects. Scanning to a SharePoint Server or Cloud Service Scanning Multi-Page Originals as Separate Files Parent topic: Scanning Scanning to a SharePoint Server or Cloud Service You can use Document Capture Pro to upload scanned images to a SharePoint server or a cloud service. 1. Do one of the following to start Document Capture Pro: • Windows 8.
2. Click the Scan icon. 3. Select any displayed scan settings you want to use. Note: See the Help information in Document Capture Pro or Document Capture for details. 4. Click Scan. You see a preview of your scan in the Document Capture Pro or Document Capture window. 5. Click one of the cloud service Destination icons to choose where to save your scanned file.
Scanning Multi-Page Originals as Separate Files You can use Document Capture Pro (Windows only) to scan multi-page originals as separate scanned files. You indicate where you want the new scanned files to start by inserting a blank page or barcode between the pages of your original. Note: The settings may vary, depending on the software version you are using. See the Help information in Document Capture Pro for details. 1.
4. Select any displayed scan settings you want to use. Note: See the Help information in Document Capture Pro for details. 5. Click Scan. You see a preview of your scan in the Document Capture Pro window. 6. Open the File menu and select Batch Save. 7. Click File Name Settings. 8. Select Apply Job Separation and click Separation Settings. 9. Select the method you used to separate the originals, select a folder name specification and click OK. 10.
Faxing See these sections to fax using your product. Note: This product allows you to store names, telephone numbers, and fax data in its memory even when the power is turned off. Make sure you restore all of the default settings if you give away or dispose of the product. This will erase all of your network settings and fax data.
1. Connect a phone cable to your telephone wall jack and to the LINE port on your product. Note: If you have a DSL or ISDN connection, you must connect the appropriate DSL filter, or ISDN terminal adapter or router to the wall jack to be able to use the line for faxing or voice calls using your product. Contact your DSL or ISDN provider for the necessary equipment.
2 DSL filter 3 DSL modem ISDN connection (one phone number) 1 ISDN wall jack 2 Terminal adapter or ISDN router 158
ISDN connection (two phone numbers) 1 ISDN wall jack 2 Terminal adapter or ISDN router 2. If you are connecting a telephone or answering machine to your product using a second phone cable, remove the cap from the EXT port on your product.
3. Connect a second phone cable to your telephone or answering machine and to the EXT port on your product. Note: If you connect an answering machine and Receive Mode is set to Auto, set the number of rings before your product answers a call to a number that is higher than your answering machine's setting for the number of rings. Any phone or answering machine must be connected to the EXT port for your product to detect an incoming fax call when the phone is picked up.
Setting Up Fax Features Using the Fax Utility - OS X Parent topic: Faxing Setting Up Basic Fax Features See these sections to select the basic settings you need to use the product's fax features. Selecting Your Country or Region Selecting the Date and Time Using the Fax Setup Wizard Selecting the Line Type Setting the Number of Rings to Answer Parent topic: Setting Up Fax Features Selecting Your Country or Region Before faxing, select the country or region in which you are using your product.
3. Scroll down and select System Administration. Enter the administrator password, if necessary. 4. Select Common Settings. 5. Scroll down and select Country/Region. 6. Scroll up or down, if necessary, then select your country or region. You see a confirmation screen. 7. If the setting is correct, select Yes. (If not, select No and retry.) Note: Changing the country or region restores the fax settings to the default settings.
2. Select Setup. 3. Scroll down and select System Administration. Enter the administrator password, if necessary.
4. Select Common Settings. 5. Select Date/Time Settings. You see a screen like this: 6. Select Daylight Saving Time. 7.
• Summer: it is spring or summer and your region uses Daylight Saving Time (DST) Note: If your region uses Daylight Saving Time (DST), you must change this setting to match the season. When you change from Winter to Summer, your product automatically sets its clock ahead one hour. When you change from Summer to Winter, it sets its clock back one hour. 8. Select Date/Time. 9. Select the date format you want to use. 10. Use the numeric keypad to enter the current date. 11.
3. Scroll down and select System Administration. Enter the administrator password, if necessary. 4. Scroll down and select Fax Settings. 5. Scroll down and select Fax Setting Wizard. The Fax Setting Wizard screen appears. 6. Select Start. 7. On the Fax Header screen, use the displayed keypad to enter the sender name for your fax source, such as your name or a business name. You can enter up to 40 characters. 8.
10. On the Receive Mode Setting screen, do one of the following: • If you have connected an external telephone or answering machine to the product, select Yes and go to the next step. • If you did not connect an external telephone or answering machine, select No and go to step 12. (Receive Mode is automatically set to Auto; otherwise you cannot receive faxes.) 11. On the next Receive Mode Setting screen, select Yes to receive faxes automatically or select No to receive faxes manually.
1. Press the home button, if necessary. 2. Select Setup. 3. Scroll down and select System Administration. Enter the administrator password, if necessary. 4. Scroll down and select Fax Settings. 5. Select Basic Settings. 6. Select Line Type. 7. Select PBX.
You see a screen like this: 8. Select Use. 9. Select Access Code. 10. Use the displayed keypad to enter the access code such as 9, and select OK. Parent topic: Setting Up Basic Fax Features Setting the Number of Rings to Answer If you connect an external answering machine and select to receive faxes automatically, make sure the Rings to Answer setting is correct. The number of rings should be higher than the number of rings your answering machine is set to for answering a call.
2. Select Setup. 3. Scroll down and select System Administration. Enter the administrator password, if necessary. 4. Scroll down and select Fax Settings. 5. Select Receive Settings.
6. Select Rings to Answer. 7. Select the number of rings, and select OK. Make sure to select a number higher than the number of rings your answering machine is set to for answering a call. Note: An answering machine picks up every call faster than the product, but the product can detect fax tones and start receiving faxes. If you answer the phone and hear a fax tone, check that the product has started receiving the fax, then hang up the phone.
2. Select Setup. 3. Scroll down and select System Administration. Enter the administrator password, if necessary. 4. Scroll down and select Fax Settings.
You see a screen like this: 5. Select the group of settings you want to change. User Default Settings - Fax Send Settings - Fax Receive Settings - Fax Output Settings - Fax Basic Settings - Fax Security Settings - Fax Parent topic: Setting Up Fax Features User Default Settings - Fax Set the default settings you want to use for faxing. Setting Options Description Resolution Standard Adjusts the scan resolution and print quality of outgoing faxes.
Setting Options Description Density Auto Automatically adjusts the darkness of outgoing faxes. Select this option when sending black-andwhite text documents. Manual Lets you select from various density levels. Half Letter Sets the size for a document placed on the scanner glass. Document Size (Glass) A5 Letter A4 ADF 2-Sided Off Select On to enable 2-sided faxing from the ADF. The Direct Send option and color faxing are disabled when you turn on this setting.
Setting Options Description Save Failure Data Off Saves faxes that failed to be sent in the product’s memory. You can resend the faxes from the product's Status Menu. On Parent topic: Selecting Advanced Fax Settings Receive Settings - Fax Set the receive options you want to use for incoming faxes. Setting Options Description Receive Mode Manual Lets you confirm whether an incoming fax should be printed; a telephone must be connected to the product Auto Automatically receives and prints faxes.
Output Settings - Fax Set the output options you want to use for incoming faxes. Note: If you select Save to Inbox, faxes are saved in the product's memory. Delete faxes after viewing or printing to prevent the memory from filling up. Even if you select other options for saving faxes, they may be saved temporarily in the product's memory. Setting Options Description Fax Output Other Settings Lets you create a folder for saving faxes on a memory device and select settings for forwarding faxes.
Setting Options Description Collation Stack On Select On to print incoming faxes so that the pages are stacked in the correct page order. (When the product is low on memory, this option may not be available.) Off Print Suspend Time Off Select On to set a time period to stop automatic printing of faxes or reports and save received faxes in the product’s memory. (Make sure there is enough free memory before using this function.
Setting Options Description Fax Speed Fast(33,600bps) Sets the speed at which you send and receive faxes. Medium(14,400bps ) Slow(9,600bps) ECM Dial Tone Detection Line Type Header On Turns on Error Correction Mode (ECM) to automatically correct errors in sent or received fax data. Off Turns off Error Correction Mode (ECM); color faxes cannot be sent or received. On Automatically dials the number you enter for faxing when the product detects a dial tone.
Setting Options Description Direct Dialing Restrictions Off Does not restrict dialed fax numbers. On Allows faxing only to numbers stored in the contacts list or history. Enter Twice Requires you to enter fax numbers twice to prevent errors. Off Selects whether or not to display a recipient confirmation screen before a fax is sent. Confirm Address List On Inbox Password Settings Register Select to set a password for viewing incoming faxes.
You see this window: 3. Select Fax Settings for Printer. (Select your product, if prompted.
You see this window: 4. Select Fax Settings. 5. Follow the prompts that appear on the screen to enter your fax header information and select your fax settings. Note: For detailed information, select the FAX Utility Help option. Parent topic: Setting Up Fax Features Setting Up Fax Features Using the Fax Utility - OS X You can set up your fax header and select your fax settings using the FAX Utility for OS X. 1. Do one of the following: • OS X 10.6/10.7/10.8/10.
• OS X 10.5: In the Apple menu or the Dock, select System Preferences. Select Print & Fax, select the FAX option for your product, and select Open Print Queue. Select Utility. 2. Double-click FAX Utility, if necessary. You see this window: 3. Select your FAX product in the Printer list. 4. Select Fax Settings. 5. Follow the prompts that appear on the screen to enter your fax header information and select your fax settings. Note: For detailed information, select the FAX Utility ? icon.
Setting Up Contacts Using the Product Control Panel You can set up your contacts and contact groups using the control panel on your product. Note: Contacts can be locked by an administrator. If you cannot access or change contacts, contact your administrator for assistance.
3. Select Contacts. Enter the administrator password, if necessary. You see a screen like this: 4. Select Menu. You see a screen like this: Note: You can print your list of contacts and groups if necessary. 5. Select Add Entry. 6. Select the number you want to use for the contact you are adding.
You see a screen like this: 7. Select the Name field, use the displayed keyboard to enter the contact name (up to 30 characters), and press . 8. Select the Index Word field, use the displayed keyboard to enter a word to use when searching for an entry (up to 30 characters), and press . (This field is optional.) 9. Select the Fax Number field, and use the numeric keypad on the LCD screen or the buttons on the product to enter the fax number. You can enter up to 64 characters.
You see a screen like this: 3. Select Contacts. Enter the administrator password, if necessary. 4. Select the contact you want to edit or delete. You see a screen like this: 5. Do one of the following: • To delete the contact, select Delete and select Yes on the confirmation screen.
• To edit the contact, select Edit, select the item you want to change, enter the correct information, and select . When you are finished editing, select Save. Parent topic: Setting Up Contacts Using the Product Control Panel Creating a Contact Group You can create a group of contacts so that you can easily send faxes to multiple recipients. Note: You can create up to 100 contacts and contact groups combined. 1. Press the home button, if necessary. 2. Select Fax. You see a screen like this: 3.
You see a screen like this: Note: You can print your list of contacts and groups if necessary. 5. Select Add Group. 6. Select the number you want to use for the group you are adding. You see a screen like this: 7. Select the Name field, use the displayed keyboard to enter the group name (up to 30 characters), and press .
8. Select the Index Word field, use the displayed keyboard to enter a word to use when searching for a group (up to 30 characters), and press . (This field is optional.) 9. Select Proceed. You see your contacts list. 10. Select the number next to each contact you want to include in your group. A check mark appears next to each selected contact. 11. Select Save.
You see a screen like this, showing both individual contacts and contact groups: 4. Select the group you want to edit. You see a screen like this: Note: If you want to delete the entire group, select Delete. 5. To edit the group, select Edit. 6. Select Proceed. You see a list of the contacts in your group.
7. To add or delete a contact, select the number next to it. 8. Select Save. Parent topic: Setting Up Contacts Using the Product Control Panel Setting Up Speed/Group Dial Lists Using the Fax Utility - Windows You can set up your speed dial and group dial lists using the FAX Utility for Windows. The utility also lets you import fax numbers from the Windows Address Book and back up fax numbers stored in your product's memory. Note: You can create up to 60 speed dial and group dial entries combined. 1.
3. Select Fax Settings for Printer. (Select your product, if prompted.) You see this window: 4. Select Speed Dial/Group Dial List.
You see this window: 5. Select an empty entry and click the icon. Note: To edit an entry, select it and click the icon. icon. To delete an entry, select it and click the 6. Do one of the following: • To create a speed dial entry, select Speed Dial, enter a name and fax number, and click OK. • To create a group dial entry, select Group, enter a name, select your desired fax numbers, and click OK. 7. Repeat the previous steps as necessary to add all your speed dial or group dial entries. 8.
Setting Up Speed/Group Dial Lists Using the Fax Utility - OS X You can set up your speed dial and group dial lists using the FAX Utility. The utility also lets you import fax numbers from the MacAddress Book and back up fax numbers to your product's memory. Note: You can create up to 60 speed dial and group dial entries combined. 1. Do one of the following: • OS X 10.6/10.7/10.8/10.9: In the Apple menu or the Dock, select System Preferences.
You see this window: 5. To add an entry, double-click an empty entry. Note: To edit an entry, select it and change the information. To delete an entry, select it and press the Delete key on your keyboard. 6. Do one of the following: • To create a speed dial entry, select Speed Dial, enter a name and fax number, and click OK. • To create a group dial entry, select Group Dial, enter a name, select your desired fax numbers, and click OK. 7.
Sending Faxes See these sections to send faxes using your product. Sending Faxes from the Product Control Panel Sending Faxes Using the Fax Utility - Windows Sending Faxes Using the Fax Utility - OS X Parent topic: Faxing Sending Faxes from the Product Control Panel See these sections to send faxes using the product's control panel.
3. Select Fax. Note: To fax a double-sided document, place your document in the ADF and turn on the ADF 2Sided setting. (You cannot fax double-sided documents in color.) 4. Do one of the following to select fax recipients: • Manually enter a fax number: Press the Enter a Fax Number field and enter a fax number. Press when done. To add another fax number, repeat the same steps. You can also use the numeric keypad on the control panel to enter a fax number.
5. If you need to change any fax settings, select Menu, select Fax Send Settings, and select your settings. 6. If you want to preview your fax in black-and-white on the LCD, select Preview. (If the preview looks incorrect, select Retry, reposition the document or change the fax settings, and repeat this step.) Note: If you do not touch the preview screen for 20 seconds, your product sends the fax automatically. You cannot preview images when the Direct Send setting is turned on. 7.
Note: You can also select these options in the User Default Settings menu. Setting Options Description Resolution Standard Adjusts the scan resolution and print quality of outgoing faxes. Fine Super Fine Ultra Fine Photo Density Document Size (Glass) Auto Automatically adjusts the darkness of outgoing faxes. Select this option when sending black-and-white text documents. Manual Lets you select from various density levels. Half Letter Sets the size for a document placed on the scanner glass.
Setting Options Description Transmission Report Print on Error Lets you select when to print transmission reports. Print Do Not Print Parent topic: Sending Faxes from the Product Control Panel Sending a Fax at a Specified Time You can send a fax at a time of your choice. Note: Make sure the product's date and time settings are correct. You can only send faxes in black-andwhite when you use this option. 1. Place your original on the product for faxing. 2. Press the home button, if necessary. 3.
6. Select Send Fax Later. 7. Select On. 8. Select Time, use the displayed keypad on the LCD screen to enter your desired time, and select OK. 9. Press one of the buttons. Note: To cancel faxing, press the Stop button. After scanning your originals, your product dials the number and sends the fax at the specified time. Note: If the product is turned off at the specified time, the fax is sent when it is powered on.
3. Select Fax. 4. Select Menu. 5. Select Polling Send and select On. 6. If you need to change any fax settings, select Menu, select Fax Send Settings, and select your settings. 7. Press the B&W button. Your document is scanned and stored until you overwrite or delete it. You can store only one document at a time. Subsequent documents overwrite the existing document. You can also delete a stored document from the Status Menu.
1. Place your original on the product for faxing. 2. Press the home button, if necessary. 3. Select Fax. 4. Select Menu. 5. Select Store Fax Data and select On. 6. If you need to change any fax settings, select Menu, select Fax Send Settings, and select your settings. 7. Press the B&W button. Your document is scanned, stored, and briefly previewed. 8. When you are ready to send the document, press the Status button.
You see a screen like this: 9. Select Job Monitor. 10. Select Communication Job. 11. Select the stored fax job you want to send. 12. Select Send/View and select Send. You can store only one document at a time. Subsequent documents overwrite the existing document. You can also delete a stored document from the Status Menu.
2. Press the home button, if necessary. 3. Dial the fax number from the connected telephone. Speak to the recipient if necessary. 4. Select Start Fax on the LCD screen. 5. Select Send. Note: Your product now communicates with the recipient's fax machine. Do not hang up the telephone. 6. When you hear a fax tone, press one of the buttons to start sending the fax. Note: If your recipient's fax machine does not print in color, your fax is automatically sent in blackand-white. 7. Hang up the telephone.
You see a window like this: 2. Select your product with the FAX option as the printer. 3. To change the Paper Size, Orientation, Color, Image Quality, or Character Density settings, click the Preferences or Properties button. Note: If you see a Setup, Printer, or Options button, click it. Then click Preferences or Properties on the next screen. For more information about selecting fax print settings, click Help. 4. Select the Page Range as necessary. (Leave the Number of copies set to 1.) 5. Click Print.
If you’re faxing for the first time, you see a window like this one: 6. Enter your sender information so that recipients can identify the origin of the fax. Then click OK to save the sender information.
You see a window like this: 7. Enter the recipient's name and fax number or select a recipient from the phonebook, then click Next. Note: For detailed instructions on using the Epson FAX Utility, click Help. 8. Select a cover sheet and enter a subject and message, then click Next. 9. Click Send to transmit your fax. Parent topic: Sending Faxes Sending Faxes Using the Fax Utility - OS X You can send a fax from a OS X printing program using the FAX Utility.
2. Select the print command in your application. Note: You may need to select a print icon on your screen, the Print option in the File menu, or another command. See your application's help utility for details. 3. Select your product FAX option as the Printer setting. 4. If necessary, click the arrow next to the Printer setting or the Show Details button to expand the print window. 5. Select the number of pages you are faxing as the Pages setting. Note: Leave the Copies setting set to 1. 6.
You see this window: 7. Do one of the following to choose your recipient: • Select a name or group from the Recipient List. • Enter a name, company, and fax number and click the + button. • Click the icon and select a recipient from your address book. 8. Select Fax Settings from the pop-up menu.
You see this window: 9. Select the Color and Image Quality settings you want to use for your fax. 10. Click Fax. Parent topic: Sending Faxes Receiving Faxes See these sections to receive faxes with your product. Fax Reception Receiving Faxes Automatically Receiving Faxes Manually Receiving a Fax by Polling Viewing a Fax on the LCD Screen Parent topic: Faxing Fax Reception Your product will automatically receive and print faxes when you set the Receive Mode to Auto.
Note: If you run out of paper during fax printing, load more paper and press the button indicated on your product's LCD screen to continue. Parent topic: Receiving Faxes Receiving Faxes Automatically To receive faxes automatically, make sure Receive Mode is set to Auto (the default setting for the product). To change the Receive Mode if necessary, select Setup > System Administration > Fax Settings > Receive Settings > Receive Mode.
Related tasks Receiving Faxes Automatically Receiving a Fax by Polling You can use polling to receive a fax from another fax machine (such as a fax information service). 1. Press the home button, if necessary. 2. Select Fax. You see a screen like this: 3. Select Menu. 4. Select Polling Receive and select On. 5. Enter the fax number you expect to receive the fax from. 6. Press one of the buttons to start receiving the fax.
1. Press the home button, if necessary. 2. Check the icon on the LCD screen. It turns on if there are any unread or unprinted faxes in the product's memory. 3. Select Fax. 4. Select Open Inbox. Enter the administrator password, if necessary. 5. Select the fax you want to view. You see the fax displayed on the screen. 6. Select Menu. 7. Select one of the printer/deleting options and follow the on-screen instructions.
2. Do one of the following: • To check the status of currrent fax jobs, select Job Monitor, select Communication Job, and select the fax job you want to check. • To check the history of faxes that have been sent or received, select Job History, select Receive Job or Send Job, and select the job you want to check. • To check received faxes that have been saved in the product's memory, select Job Storage and select Inbox.
Related references Output Settings - Fax Fax Report Options Select the fax report or list you want to print. Fax Settings List Print a list of the current fax communication settings. Fax Log View or print a report on recent fax transmissions. Last Transmission Print a report on the previous fax that was sent or received through polling. Stored Fax Documents Print a list of the fax jobs currently stored in the product's memory. Protocol Trace Print a detailed report for the previous sent or received fax.
Using USB Flash Drives With Your Product Follow the instructions here to work with a USB flash drive inserted into your product. Inserting a USB Flash Drive Removing a USB Flash Drive Viewing and Printing From the LCD Screen Transferring Files on a USB Flash Drive Inserting a USB Flash Drive Insert your USB flash drive into the USB port on the front of the product. Note: Epson cannot guarantee the compatibility of your device. Make sure the files on the device are compatible with the product.
1. If your product is connected to your computer using a USB cable, do one of the following: • Windows: Open the My Computer, Computer, or Windows Explorer utility. Then right-click the name of your flash drive (listed as a removable disk) and select Eject. • OS X: Drag the removable disk icon for your flash drive from the desktop into the trash. Caution: Do not remove a flash drive before completing the procedure above or you may lose data from the flash drive. 2.
You see a screen like this: Note: If you have more than 999 JPEG images on your device, the images are divided into groups, and you must first select the group you want to display. 4. Do one of the following to select your photos: • To select individual photos, select the thumbnail image of the photo you want to print, then use the numeric keypad on the control panel or press + or – on the LCD screen to select the number of copies (up to 99).
Print Setting Options - Device Mode Printing TIFF Files You can select and print files in the TIFF format from a USB flash drive or other device. 1. Press the home button, if necessary. 2. Select Memory Device. 3. Select TIFF. You see a list of the available files. 4. Select the file you want to print. You see information about the file. 5. Select Proceed. 6.
Photo adjustment settings Available options Description Fix Photo On Automatically adjusts the brightness, contrast, and saturation of the photo based on the Advanced > Scene Detection setting that is selected Off Turns off automatic adjustments; see Note below P.I.M.
Print settings Available options Description Fit Frame On Automatically crops the photo to fit into the selected photo layout Off Turns off automatic cropping On Prints at normal speed Off Slows down printing to improve print quality Last Page on Top Select the order for printing multi-page TIFF files.
5. Select Memory Device Interface. You see a screen like this: 6. Make sure Memory Device is set to Enable. 7. Select File Sharing. 8. Select the way your computer is connected to the product: either USB or Wi-Fi/Network.
• OS X with a network connection: Select the hard drive icon on your desktop or select Computer from the Go menu, select your product in the SHARED section of the sidebar (you may need to widen the sidebar to see the name), and select the USBSTORAGE icon. 4. Select the folder that contains your files. 5. Drag the files you want to transfer to the desired folder on your computer or on your flash drive.
Replacing Ink Cartridges and Maintenance Boxes The maintenance box stores ink that gets flushed from the system during print head cleaning. When an ink cartridge is expended or the maintenance box is at the end of its service life, you need to replace it. You may also need to replace a cartridge that is more than six months old if your printouts do not look their best, even after cleaning and aligning the print head.
You see a screen like this: The ink and maintenance box levels are displayed at the bottom of the screen. Note: The displayed ink and maintenance box levels are approximate. 3. For more information, select the ink cartridge images at the bottom of the screen.
You see this window: 2. Replace or reinstall the maintenance box or any ink cartridge as indicated on the screen. Note: If any of the cartridges installed in the product is broken, incompatible with the product model, or improperly installed, Epson Status Monitor will not display an accurate cartridge status. 3. To disable the low ink reminder, right-click the product icon in the Windows taskbar and select Monitoring Preferences.
You see this window: 4. Deselect the See Low Ink Reminder alerts checkbox at the bottom of the screen. 5. To disable promotional offers, deselect the Display Epson Offers checkbox.
Checking Cartridge and Maintenance Box Status with OS X You can check the status of your ink cartridges and maintenance box using a utility on your Mac. 1. Do one of the following: • OS X 10.6/10.7/10.8/10.9: In the Apple menu or the Dock, select System Preferences. Select Print & Fax, Print & Scan, or Printers & Scanners, select your product, and select Options & Supplies. Select Utility and select Open Printer Utility. • OS X 10.5: In the Apple menu or the Dock, select System Preferences.
3. Do the following as necessary: • You can update the ink cartridge and maintenance box status by clicking Update. • Replace or reinstall the maintenance box or any ink cartridge as indicated on the screen. Note: If any of the cartridges installed in the product is broken, incompatible with the product model, or improperly installed, Epson Status Monitor will not display an accurate cartridge status.
Ink color Part number Standard-capacity High-capacity Black 786 786XL Cyan 786 786XL Magenta 786 786XL Yellow 786 786XL Parent topic: Purchase Epson Ink Cartridges and Maintenance Box Removing and Installing Ink Cartridges Make sure you have your replacement cartridges handy before you begin. You must install new cartridges immediately after removing the old ones.
4. Push the ink cartridge in, then pull it out of the slot. Note: Dispose of used cartridges carefully. Do not take the used cartridge apart or try to refill it. Warning: If ink gets on your skin, wash it thoroughly with soap and water. If ink gets into your eyes, flush them immediately with water. If ink gets into your mouth, spit it out and see a doctor right away. Keep ink cartridges out of the reach of children.
5. Remove the cartridge from the package. Caution: Do not touch the green chip on the cartridge. Install the new cartridge immediately after removing the old one; if you do not, the print head may dry out and be unable to print. 6. Gently shake the ink cartridge horizontally for about five seconds as shown. Caution: Do not remove any labels or seals, or ink will leak.
7. Insert the new cartridge into the holder and push it in until it clicks into place. 8. Select Check on the LCD screen to make sure the cartridges are installed correctly. Caution: If you see a message that an ink cartridge is installed incorrectly, press in the ink cartridge until it clicks into place. 9. When you are finished, close the front cover. The product starts priming the ink and returns to its previous state when finished. Note: Do not turn off the printer during ink replacement.
Caution: If you remove an ink cartridge for later use, protect the ink supply area from dirt and dust and store it in the same environment as the printer. The valve in the ink supply port is designed to contain any excess ink, but do not touch the ink supply port or surrounding area. Always store ink cartridges with the label facing up; do not store cartridges upside-down.
6. Select the Black/Grayscale checkbox. 7. Click OK. 8. Print your document. Epson Status Monitor 3 displays a print message. 9. Click Print in Black to print your document. Parent topic: Printing With Black Ink and Expended Color Cartridges Printing With Expended Color Cartridges - OS X If printing stops, you can cancel your print job and select settings to temporarily print with only black ink on plain paper or on an envelope. 1. Click the printer icon in the Dock. 2.
You see a screen like this: 6. Select On as the Permit temporary black printing setting. 7. Click OK. 8. Close the utility window. 9. Load plain paper or an envelope in your product. 10. Access the print settings in your print application. 11. Select Print Settings from the pop-up menu. 12. Select Plain Paper/Bright White Paper or Envelope as the paper type setting. 13. Select the Grayscale option. 14. Click Print to print your document.
Conserving Low Black Ink with Windows The following window appears when black ink runs low and there is more color ink. Note: The window appears only when you have selected Plain Paper/Bright White Paper as the paper type setting, and depends on other selected print settings. To use this feature, Epson Status Monitor must be enabled. • Click Yes to use a mixture of color inks to create black, or No to continue using the remaining black ink for the document you are printing.
2. Remove the new maintenance box from its package. Caution: Do not touch the green chip on the maintenance box. 3. Press the buttons on the sides of the rear cover and remove it. 4. Grasp the maintenance box as shown and pull it out of its holder. Note: Do not tilt the used maintenance box or take it apart.
Warning: If ink gets on your skin, wash it thoroughly with soap and water. If ink gets into your eyes, flush them immediately with water. If ink gets into your mouth, spit it out and see a doctor right away. Keep the maintenance box out of the reach of children and do not drink the ink. 5. Place the used maintenance box in the plastic bag that came with the new maintenance box. Seal the bag and dispose of it carefully. 6. Insert the new maintenance box into the holder and push it all the way in. 7.
Related concepts Purchase Epson Ink Cartridges and Maintenance Box 241
Adjusting Print Quality If your print quality declines, you may need to run a utility to clean or align the print head. If running these utilities does not solve the problem, you may need to replace the ink cartridges. Print Head Maintenance Print Head Alignment Cleaning the Paper Guide Print Head Maintenance If your printouts become too light, or you see dark or light bands across them, you may need to clean the print head nozzles. Cleaning uses ink, so clean the nozzles only if print quality declines.
3. Select Setup. 4. Select Maintenance. You see a screen like this: 5. Select Print Head Nozzle Check. You see a screen like this: 6. Press the Color button. The nozzle pattern prints.
7. Check the printed pattern to see if there are gaps in the lines. Print head is clean Print head needs cleaning 8. Do one of the following: • If there are no gaps, select Done. • If there are gaps or the pattern is faint, select Clean the Print Head and continue. 9. Follow the instructions on the screen to clean the print head, check the nozzles, and repeat the process as necessary.
2. Load a few sheets of plain paper in the product. 3. Do one of the following: • Windows: Access the Windows Desktop and right-click the product icon in the Windows taskbar. • OS X 10.6/10.7/10.8/10.9: In the Apple menu or the Dock, select System Preferences. Select Print & Fax, Print & Scan, or Printers & Scanners, select your product, and select Options & Supplies. Select Utility and select Open Printer Utility. • OS X 10.5: In the Apple menu or the Dock, select System Preferences.
6. Check the printed pattern to see if there are gaps in the lines. Print head is clean Print head needs cleaning 7. If there are no gaps, click Finish. If there are gaps or the pattern is faint, clean the print head. Parent topic: Print Head Nozzle Check Print Head Cleaning If print quality has declined and the nozzle check pattern indicates clogged nozzles, you can clean the print head.
1. Make sure there are no errors on the LCD screen. 2. Load a few sheets of plain paper in the product. 3. Press the home button, if necessary. 4. Select Setup. 5. Select Maintenance. You see a screen like this: 6. Select Print Head Cleaning.
7. Press the Color button to clean the print head. When the cleaning cycle is finished, you see a message on the screen. Caution: Never turn off the product during a cleaning cycle or you may damage it. 8. Select Print Nozzle Check Pattern. 9. Press the Color button to confirm that the print head is clean. If you don’t see any improvement after cleaning the print head up to 4 times, leave the product turned on and wait at least 6 hours. Then try cleaning the print head again.
You see a window like this: 5. Click Start to begin the cleaning cycle. Note: Do not open the front cover during the cleaning cycle. Caution: Never turn off the product during a cleaning cycle or you may damage it. 6. When the cleaning cycle is finished, you can check to see if the nozzles are clean; click Print Nozzle Check Pattern and click Print.
7. Check the printed pattern to see if there are gaps in the lines. Print head is clean Print head needs cleaning • If there are no gaps, click Finish. • If there are gaps or the pattern is faint, click Clean to clean the print head again. If you don’t see any improvement after cleaning the print head up to 4 times, leave the product turned on and wait at least 6 hours. Then try cleaning the print head again.
Aligning the Print Head Using the Product Control Panel Aligning the Print Head Using a Computer Utility Parent topic: Adjusting Print Quality Related concepts Print Head Cleaning Aligning the Print Head Using the Product Control Panel You can align the print head using the control panel on your product. 1. Make sure there are no errors on the LCD screen. 2. Load a few sheets of plain paper in the cassette (or in cassette 1 if your product has two cassettes). 3. Press the home button, if necessary. 4.
You see a screen like this: 7. Do one of the following: • If your printouts look blurry or vertical lines are misaligned, select Vertical Alignment. • If you see horizontal bands at regular intervals, select Horizontal Alignment. 8. Follow the on-screen instructions to print an alignment sheet. Note: Do not cancel printing while you are printing head alignment patterns. 9.
• If you printed a horizontal alignment sheet, select the number representing the pattern with the least amount of separation or overlap on the LCD screen. Parent topic: Print Head Alignment Related references Product Status Messages Related tasks Loading Paper in the Cassette Aligning the Print Head Using a Computer Utility You can align the print head using a utility on your Windows computer or Mac. 1. Make sure there are no errors on the LCD screen. 2.
You see a window like this: 6. Check the printed pattern and follow the instructions on the screen to choose the number representing the best printed pattern for each set.
• After choosing each pattern number, click Next. • If no patterns are aligned in one or more of the sets, choose the closest one in each set and click Realignment. Then print another alignment sheet and check it. Note: Click Skip (where available) if you want to skip a particular alignment sheet. 7. When you are done, click Finish.
You see a screen like this: 6. Scroll down and select Paper Guide Cleaning. 7. Select the paper source to clean. 8. Press the Color button. 9. Check the back of the ejected paper to see if it is clean. 10. Repeat as necessary until the paper comes out clean. Note: If the paper comes out stained even after several cleaning attempts, try cleaning the other paper sources.
Cleaning and Transporting Your Product See these sections if you need to clean or transport your product. Cleaning Your Product Transporting Your Product Cleaning Your Product To keep your product working at its best, you should clean it several times a year. Note: Close the rear paper feed slot and the output tray when you are not using the product to protect it from dust. Caution: Do not use a hard brush, alcohol, or paint thinner to clean the product or you may damage it.
5. Clean the scanner glass and the glass area on the left with a soft, lint-free cloth (microfiber is recommended), moistened with a little glass cleaner. Caution: Do not spray glass cleaner directly on the glass and do not press the glass surface with any force. Note: If lines appear on the printout or in scanned images, carefully clean the scanner glass on the left. 6. Open the ADF cover and use a soft, dry, lint-free cloth (microfiber is recommended), to clean the rollers and the interior of the ADF.
Transporting Your Product If you need to ship your product or transport it a long distance, prepare it for transportation as described here. Caution: During transportation and storage, follow these guidelines: • Avoid tilting the product, placing it vertically, or turning it upside down; otherwise ink may leak. • Leave the ink cartridges installed. Removing the cartridges can dry out the print head and may prevent the product from printing. 1. Turn off the product. 2. Remove all the paper from the product.
Solving Problems Check these sections for solutions to problems you may have using your product.
• OS X: You can manually update the software by opening the Applications > Epson Software folder and selecting EPSON Software Updater. Parent topic: Solving Problems Product Status Messages You can often diagnose problems with your product by checking the messages on its LCD screen. You can also check for errors by pressing the Status button to display the Status Menu. Note: If the screen is dark, press the screen to wake the product from sleep mode.
LCD screen message Condition/solution Communication error See the link below to the Error Code section in this manual. Authentication error DNS error Recovery mode An error has occurred during firmware updating. Connect your product using a USB cable and try downloading the Firmware Update from the Epson support site. If you still need help, contact Epson for support.
Code Condition/solution 102 Collated printing has failed due to a lack of available memory. Reduce the size of the print job or print one copy at a time. 103 Print quality was decreased due to a lack of available memory. If the quality of the printout is unacceptable, try simplifying the page by reducing the number of graphics or the number and size of the fonts. 104 Reverse printing has failed due to a lack of available memory. Reduce the data size of the print job.
Code Condition/solution 208 The fax could not be sent to some of the specified recipients. Print a fax log to check which recipients failed to receive the fax. If the Save Failure Data setting is turned on, you can resend a fax from Job Monitor in the Status Menu. 301 401 302 There is not enough storage space available on the external memory device. Clear space on the device or use a different device. The external memory device is write-protected. Disable write protection.
Printing Fax Reports Related topics Sending Faxes Wi-Fi or Wired Networking Running a Product Check Running a product check helps you determine if your product is operating properly. 1. Disconnect any interface cables connected to your product. 2. Load plain paper in the product. 3. Press the home button, if necessary. 4. Select Setup. 5. Select Maintenance. You see a screen like this: 6. Select Print Head Nozzle Check.
You see a screen like this: 7. Press the Color button. The nozzle pattern prints. 8. Do one of the following, depending on the results of the product check: • If the page prints and the nozzle check pattern is complete, the product is operating properly. Any operation problem you may have could be caused by your computer, cable, software, or selected settings. Check the other solutions in this book or try uninstalling and reinstalling your printer software.
Resetting Control Panel Defaults If you have a problem with settings on the product control panel, you can reset them to their factory defaults. You can choose which settings to reset or reset them all. Note: This setting can be locked by an administrator. If you cannot access or change this setting, contact your administrator for assistance. 1. Press the home button, if necessary. 2. Select Setup. 3. Scroll down and select System Administration. Enter the administrator password, if necessary. 4.
6. Select Yes to reset the selected settings. (Select No if you want to cancel the operation.) Parent topic: Solving Problems Solving Setup Problems Check these sections if you have problems while setting up your product. Noise After Ink Installation Software Installation Problems Parent topic: Solving Problems Noise After Ink Installation If you hear noises from your product after installing ink, check the following: • The first time you install the ink cartridge, the product must prime its print head.
Related references Windows System Requirements OS X System Requirements Solving Network Problems Check these solutions if you have problems setting up or using your product on a network. Note: Breakdown or repair of this product may cause loss of fax and network data and settings. Epson is not responsible for backing up or recovering data and settings during or after the warranty period. We recommend that you make your own backup or print out your fax and network data and settings.
obtain your product's MAC address, print a network status sheet. Then follow the instructions in your router or access point documentation to add the address to the list. • If your router or access point does not broadcast its network name (SSID), follow the instructions that came with your product to enter your wireless network name manually. • If your router or access point has security enabled, determine the kind of security it is using and any required password or passphrase for connection.
2. Windows only: uninstall your product software. 3. Initialize your router following the instructions in your router documentation. Note: If you are reading these instructions online, you will lose your internet connection when you initialize your router, so note the next step before initializing it. 4. Download your product software from the Epson website, or install it from the CD that came with your product using the instructions on the Start Here sheet.
• Print a network status sheet and verify that the network settings are correct. If the network status is Disconnected, check any cable connections and turn your product off and then on again. • If you are using TCP/IP, make sure the product's IP address is set correctly for your network. If your network does not assign IP addresses using DHCP, set the IP address manually. • Make sure your computer and product are both using the same wireless network.
Cannot Scan Over a Network If you cannot start Epson Scan for scanning over a network, try these solutions: • If you cannot scan from your product control panel, make sure you restarted your computer after installing the product software. Make sure the Event Manager program is not being blocked by your firewall or security software. • If you are scanning a large original at a high resolution, a network communication error may occur. Try scanning again at a lower resolution.
Solving Copying Problems Check these solutions if you have problems copying with your product. Product Makes Noise, But Nothing Copies Product Makes Noise When It Sits for a While Parent topic: Solving Problems Product Makes Noise, But Nothing Copies If your product makes a noise, but nothing copies, try these solutions: • Run a nozzle check to see if any of the print head nozzles are clogged. Then clean the print head, if necessary.
Paper Feeding Problems If you have problems feeding paper, try these solutions: • If paper does not feed for printing, remove it from the rear feed slot or cassette. Reload it, then adjust the edge guides. Make sure the paper stack is not above the tab on the edge guides inside the cassette or rear feed slot. • If multiple pages feed at once, remove the paper, fan the edges to separate the sheets, and reload it. • Do not load more than the recommended number of sheets.
2. Open the front cover. 3. Remove any paper inside, including torn pieces. 4. Close the front cover.
5. If any jammed paper remains near the output tray, carefully remove it. 6. Follow the prompts on the LCD screen to clear any error messages. If you still see a paper jam message, check the other paper jam solutions.
4. Carefully remove any paper jammed inside the product. 5. Carefully follow all paper loading instructions and reload the paper. 6. Keep the cassette flat as you gently insert it. 7. Follow the prompts on the LCD screen to clear any error messages. If you still see a paper jam message, check the other paper jam solutions.
Paper Jam Problems in the Duplexer (Rear Cover) Paper Jam Problems in the Duplexer (Rear Cover) If paper has jammed in the duplexer, follow the steps here to clear the jam. 1. Cancel the print job from your computer, if necessary. 2. Press the buttons on the sides of the rear cover and remove it. 3. Carefully remove any jammed paper.
4. Remove any jammed paper from the duplexer. 5. Press the buttons on the rear cover as you reattach it. 6. Follow the prompts on the LCD screen to clear any error messages. If you still see a paper jam message, check the other paper jam solutions.
Document Jams in the Automatic Document Feeder If you have problems with document jams in the automatic document feeder (ADF), follow the steps here to clear the jam. 1. Cancel the print job, if necessary. 2. Remove your originals from the ADF. 3. Open the ADF cover. 4. Carefully remove any jammed pages. Caution: Make sure you open the ADF cover before removing any jammed paper. Otherwise the product may be damaged.
5. Close the ADF cover open, then raise the document cover. 6. Carefully remove any jammed pages. 7. Lower the document cover.
8. Raise the ADF input tray. 9. Carefully remove any jammed pages. 10. Lower the ADF input tray. 11. Reload your originals. Caution: Make sure you do not load the ADF beyond its capacity for your paper size. Also make sure the originals you load are not bent, folded, or curled and do not have tape, staples, or other materials that could obstruct the feeder. 12. Follow the prompts on the LCD screen to clear any error messages. If you still see a paper jam message, check the other paper jam solutions.
Related references Paper Jam Problems Inside the Product Paper Jam Problems in the Cassette Paper Jam Problems in the Duplexer (Rear Cover) Paper Ejection Problems If you have problems with paper ejecting properly, try these solutions: • If paper does not eject fully, you may have set the wrong paper size. Cancel printing to eject the paper. Select the correct paper size when you reprint. • If paper is wrinkled when it ejects, it may be damp or too thin.
• Make sure any interface cables are connected securely at both ends. • If you connected your product to a USB hub, make sure it is a first-tier hub. If it still does not print, connect your product directly to your computer instead of the hub. • Run a product check to see if a test page prints. If the test page prints, check to see if your product software is installed correctly. • In Windows, make sure your product is selected as the default printer.
• Windows XP: Click Start and select Printers and Faxes. (Or open the Control Panel, select Printers and Other Hardware, if necessary, and Printers and Faxes.) 2. Right-click your product name, select Printing Preferences, and select your product name again if necessary. 3. Click the Maintenance tab. 4. Click the Extended Settings button. 5. Select Enable EPSON Status Monitor 3, then click OK. 6. Click the Monitoring Preferences button. 7.
• Windows: Click the Maintenance tab, select Extended Settings, and select the following settings: • High Speed Copies • Always Spool RAW Datatype • Page Rendering Mode • Print as Bitmap Parent topic: Solving Problems Printing from a Computer Related references Windows System Requirements OS X System Requirements Paper Type Settings Related tasks Selecting Basic Print Settings - Windows Selecting Extended Settings - Windows Selecting Basic Print Settings - OS X Solving Page Layout and Content Problems Chec
Note: Leave these options turned on when you print on Epson Iron-on Cool Peel Transfer paper, if available for your product. Parent topic: Solving Page Layout and Content Problems Related tasks Selecting Additional Layout and Print Options - Windows Selecting Basic Print Settings - OS X Too Many Copies Print Make sure that the Copies setting in your printing program or printer software is not set for multiple copies.
• Make sure you selected the correct margins for your paper size in your printing program. • Make sure your paper is positioned correctly for feeding into the printer. You can use the preview option in your printer software to check your margins before you print.
Incorrect Image Size or Position If your printed image is the wrong size or in the wrong position, try these solutions: • Make sure you selected the correct paper size and layout settings in your printing program and printer software. • Make sure your paper is positioned correctly for feeding into the printer. You can use the preview option in your printer software to check your margins before you print.
Blurry or Smeared Printout Faint Printout or Printout Has Gaps Grainy Printout Incorrect Colors Parent topic: Solving Problems White or Dark Lines in Printout If you notice white or dark lines in your prints (also called banding), try these solutions before you reprint: • Run a nozzle check to see if any of the print head nozzles are clogged. Then clean the print head, if necessary. • Make sure the paper type setting matches the type of paper you loaded.
• Make sure your paper meets the specifications for your product. • Use Epson papers to ensure proper saturation and absorption of genuine Epson inks. • Make sure the paper type setting in your product software matches the type of paper you loaded. • If you are printing on thick paper or envelopes, turn on the Thick Paper setting from the control panel or select Thick Paper and Envelopes in the Extended Settings of the printer software. (Turning this setting on will decrease print speed.
Selecting Double-sided Printing Settings - OS X Faint Printout or Printout Has Gaps If your printouts are faint or have gaps, try these solutions: • Run a nozzle check to see if any of the print head nozzles are clogged. Then clean the print head, if necessary. • The ink cartridges may be old or low on ink, and you may need to replace them. • Make sure the paper type setting matches the type of paper you loaded. • Make sure your paper is not damp, curled, old, or loaded incorrectly in your product.
• Run a nozzle check to see if any of the print head nozzles are clogged. Then clean the print head, if necessary. • Align the print head. • You may need to increase the image resolution or print a smaller size; see your software documentation. • If you enlarged the image in an image-editing program, you need to increase the resolution setting to retain a high image quality. Increase the resolution by the same amount you increased the image size.
• Your printed colors can never exactly match your on-screen colors. However, you can use a color management system to get as close as possible. Try using the color management options in your printer software. • For best results, use genuine Epson ink and paper.
Note: With OS X 10.6, 10.7, 10.8, or 10.9, in addition to scanning with Image Capture, you can download and install Epson Scan scanning software. Epson Scan provides additional image adjustment and photo correction features for enhancing scanned images, and provides an interface for TWAIN-compliant OCR scanning software, such as ABBYY FineReader. To download Epson Scan, visit Epson's driver download site (U.S. downloads or Canadian downloads).
Note: With OS X 10.6, 10.7, 10.8, or 10.9, in addition to scanning with Image Capture, you can download and install Epson Scan scanning software. Epson Scan provides additional image adjustment and photo correction features for enhancing scanned images, and provides an interface for TWAINcompliant OCR scanning software, such as ABBYY FineReader. To download Epson Scan, visit Epson's driver download site (U.S. downloads or Canadian downloads).
Related references Available Image Adjustments - Office Mode Related topics Placing Originals on the Product Line of Dots Appears in All Scanned Images If a line of dots appears in all your scanned images, clean the scanner glass with a soft, dry, lint-free cloth or use a small amount of glass cleaner on the cloth, if necessary. Paper towels are not recommended. Caution: Do not spray glass cleaner directly on the scanner glass.
• Increase the Resolution setting. Parent topic: Solving Scanned Image Quality Problems Related topics Selecting Epson Scan Settings Image Colors are Patchy at the Edges If you are scanning a thick or warped original, cover its edges with paper to block external light as you scan it.
Parent topic: Solving Scanned Image Quality Problems Related topics Selecting Epson Scan Settings Scanned Image Colors Do Not Match Original Colors Printed colors can never exactly match the colors on your computer monitor because printers and monitors use different color systems: monitors use RGB (red, green, and blue) and printers typically use CMYK (cyan, magenta, yellow, and black).
Scanned Image Edges are Cropped If the edges of a scanned image are cropped, make sure your original is placed correctly for scanning. If necessary, move your original away from the edges of the scanner glass slightly. Parent topic: Solving Scanned Image Quality Problems Related topics Placing Originals on the Product Solving Faxing Problems Check these solutions if you have problems faxing with your product.
• Make sure the error correction mode (ECM) setting is turned on if you are trying to send or receive a color fax. • If your telephone line uses call waiting and you have trouble receiving faxes, turn off call waiting to prevent disruption of incoming faxes. Note: If your product is connected to a VoIP (Voice over Internet Protocol) phone line, keep in mind that fax machines are designed to work over analog phone lines. Epson cannot guarantee that fax transmission will work when using VoIP.
When to Uninstall Your Product Software If you have a problem that requires you to uninstall and re-install your software, follow the instructions for your operating system. Uninstalling Product Software - Windows Uninstalling Product Software - OS X Parent topic: Solving Problems Uninstalling Product Software - Windows You can uninstall and then re-install your product software to solve certain problems. 1. Turn off the product. 2. Disconnect any interface cables. 3. Do one of the following: • Windows 8.
5. Do one of the following to uninstall Epson Scan, then follow any on-screen instructions: • Windows 8.x, Windows 7, or Windows Vista: Select EPSON Scan and click Uninstall/Change. • Windows XP: Select EPSON Scan and click Change/Remove. 6. Restart your computer, then see the Start Here sheet to re-install your software. Note: If you find that re-installing your product software does not solve a problem, contact Epson.
Internet Support Visit Epson's support website at epson.com/support (U.S.) or epson.ca/support (Canada) for solutions to common problems. You can download drivers and documentation, get FAQs and troubleshooting advice, or e-mail Epson with your questions.
Technical Specifications These sections list the technical specifications for your product. Note: Epson offers a recycling program for end of life products. Please go to epson.com/recycle for information on how to return your products for proper disposal.
Note: Visit Epson's support website at epson.com/support (U.S.) or epson.ca/support (Canada) for the latest in compatibility and drivers for your product. Parent topic: Technical Specifications OS X System Requirements To use your product and its software, your Mac should use one of these operating systems: • OS X 10.9.x • OS X 10.8.x • OS X 10.7.x • OS X 10.6.x • OS X 10.5.8 Note: Visit Epson's support website at epson.com/support (U.S.) or epson.
Scanning Specifications Scanner type Flatbed, color Photoelectric device CIS Effective pixels 10200 × 14040 pixels at 1200 dpi; scanning area may be restricted if resolution setting is large Document size Maximum: A4 (8.3 × 11.7 inches [210 × 297 mm]) or Letter (8.
Parent topic: Technical Specifications Fax Specifications Fax type Walk-up black-and-white and color fax capability (ITU-T Super Group 3) Supported lines Standard analog telephone lines PBX (Private Branch Exchange) telephone systems Speed Up to 33.
reduce print quality and cause paper jams or other problems. If you encounter problems, switch to a higher grade of paper. Single-sheets Size B5 (7.2 × 10.1 inches [182 × 257 mm]) A4 (8.3 × 11.7 inches [210 × 297 mm]) A5 (5.8 × 8.2 inches [148 × 210 mm]) A6 (4.1 × 5.8 inches [105 × 148 mm]) Letter (8.5 × 11 inches [216 × 279 mm]) Legal (8.5 × 14 inches [216 × 357 mm]) 4 × 6 inches (102 × 152 mm) 5 × 7 inches (127 × 178 mm) Executive (7.25 × 10.5 inches [184 × 267 mm]) 16:9 wide (4 × 7.
Single sheets 1 Top: 0.12 inch (3 mm) minimum 2 Left: 0.12 inch (3 mm) minimum 3 Right: 0.12 inch (3 mm) minimum 4 Bottom: 0.
1 Left: 0.12 inch (3 mm) minimum; 1.89 inches (48 mm) recommended 2 Bottom: 0.20 inch (5 mm) minimum 3 Top: 0.20 inch (5 mm) minimum 4 Right: 0.12 inch (3 mm) minimum; 0.83 inch (21 mm) recommended Parent topic: Technical Specifications Ink Cartridge Specifications Note: This product uses only genuine Epson-brand cartridges. Other brands of ink cartridges and ink supplies are not compatible and, even if described as compatible, may not function properly.
Dimension Specifications Height WF-4630: Stored: 13.5 inches (342 mm) Printing: 15.1 inches (383 mm) WF-4640: Stored: 16.6 inches (422 mm) Printing: 18.2 inches (462 mm) Width Stored: 18.1 inches (461 mm) Printing: 18.1 inches (461 mm) Depth Stored: 16.6 inches (422 mm) Printing: 25.8 inches (655 mm); with the output tray extension extended Weight WF-4630: (without ink cartridges or power cord) 31.3 lb (14.2 kg) WF-4640: 37 lb (16.
Power consumption WF-4630: (with USB connection) Standalone copying: 20 W (ISO/IEC24712) Ready mode: 7.5 W Sleep mode: 1.8 W Power off mode: 0.3 W WF-4640: Standalone copying: 21 W (ISO/IEC24712) Ready mode: 8.2 W Sleep mode: 2.0 W Power off mode: 0.
Note: Epson cannot guarantee the operation of externally connected devices. External storage devices that are powered via USB are not recommended. Use only external storage devices with independent AC power sources. Parent topic: Technical Specifications Network Interface Specifications Wi-Fi Standard IEEE 802.11 b/g/n; complies with either IEEE 802.11 b/g or IEEE 802.
Parent topic: Technical Specifications Safety and Approvals Specifications United States Safety: UL60950-1 EMC: FCC part 15 Subpart B class B Canada Safety: CAN/CSA C22.2 No. 60950-1 EMC: CAN/CSA-CEI/IEC CISPR 22 Class B This equipment contains the following wireless module: • Manufacturer: Askey Computer Corporation. • Type: WLU6117-D69 (RoHS) This product conforms to Part 15 of FCC Rules and RSS-210 of the IC Rules.
Notices Check these sections for important notices about your product. Note: Epson offers a recycling program for end of life products. Please go to epson.com/recycle for information on how to return your products for proper disposal. Epson offers postage-paid ink cartridge recycling with an environmental incentive. Go to epson.com/cartridgereturn (U.S.) or epson.ca/cartridgereturn (Canada) to learn more.
• Place the product on a flat, stable surface that extends beyond its base in all directions. It will not operate properly if it is tilted or at an angle. • Make sure the back of the product is at least 4 inches (10 cm) away from the wall. • Allow space behind the product for the cables, and space above the product so that you can fully raise the document cover. • Leave enough space in front of the product for the paper to be fully ejected.
• Before transporting the product, make sure that the print head is in the home (far right) position and the ink cartridges are in place. • When storing or transporting the product, do not tilt it, stand it on its side, or turn it upside down; otherwise ink may leak.
• After bringing an ink cartridge inside from a cold storage site, allow it to warm up at room temperature for at least three hours before using it. • Store ink cartridges with their labels facing upward. Do not store cartridges upside down. Parent topic: General Product Safety Instructions LCD Screen Safety Instructions • Use only a dry, soft cloth to clean the LCD screen. Do not use liquid or chemical cleansers. • If the LCD screen is damaged, contact Epson.
Parent topic: General Product Safety Instructions FCC Compliance Statement For United States Users This equipment complies with Part 68 of the FCC rules and the requirements adopted by the Administrative Council for Terminal Attachments ("ACTA") . On the surface of this equipment is a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. If requested, this number must be provided to the telephone company.
If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved. This equipment may not be used on coin service provided by the telephone company. Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission or corporation commission for information.
WARNING The connection of a non-shielded equipment interface cable to this equipment will invalidate the FCC Certification or Declaration of this device and may cause interference levels which exceed the limits established by the FCC for this equipment. It is the responsibility of the user to obtain and use a shielded equipment interface cable with this device. If this equipment has more than one interface connector, do not leave cables connected to unused interfaces.
This printer product includes software developed by the OpenSSL project for use in the OpenSSL Toolkit (http://www.openssl.org/). This product includes cryptographic software written by Eric Young (eay@cryptsoft.com). 5. The license terms of each open source software program are described in OSS.pdf on the Epson support site. 6. The list of open source software programs which this printer product includes are as follows.
Net-SNMP license This printer product includes the open source software program "Net-SNMP" which applies the terms and conditions provided by owner of the copyright to the "Net-SNMP". OpenSSL License/Original SSLeay License This printer product includes t he open source software program "OpenSSL toolkit" which applies the license terms of OpenSSL License and Original SSLeay License.
This printer product includes the open source software program "OpenLDAP 2.4.30" which applies the terms and conditions provided by owner of the copyright to the "OpenLDAP". Parent topic: Notices Trademarks EPSON® and Supplies Central® are registered trademarks, EPSON Exceed Your Vision is a registered logomark, and Epson ConnectTM, Epson iPrintTM , and Remote PrintTM are trademarks of Seiko Epson Corporation. Epson StoreSM is a service mark of Epson America, Inc.
Seiko Epson Corporation shall not be held liable for any damage resulting from electromagnetic interference that occurs from the use of any interface cables other than those designated as Epson approved Products by Seiko Epson Corporation. This information is subject to change without notice.
Default Delay Times for Power Management for Epson Products This product will enter sleep mode after a period of nonuse. This is to ensure that the product meets Energy Star standards of energy efficiency. More energy savings can be achieved by setting the time to sleep to a shorter interval. Parent topic: Copyright Notice Copyright Attribution © 2014 Epson America, Inc.