User's Guide

If you are viewing the normal preview, you can do the following to adjust the image(s).
To select your scan area, click the
auto locate icon to create a marquee that marks the edges of your
image area. You can move the marquee to change the scan area. See Creating a Marquee on a Preview
Image for instructions.
Note:
If you are going to scan at a different size than your original, you must first select your Target
Size and automatically create a marquee that is proportioned to that size. See Selecting the Scan
Size for instructions. You can then copy the marquee and place it on each image you will scan at
that size.
To zoom in on an image, click inside the scan area and click the Zoom button. Epson Scan prescans again
and displays a larger preview on the Zoom tab.
To adjust the image quality, click the scan area(s) you want to modify and make the adjustments. See
Adjusting the Color and Other Image Settings for instructions.
If you are viewing the thumbnail preview, you can do the following to adjust the image(s).