User's Guide

Loading documents in the ADF
Important:
Do not feed photographs or valuable original artwork into the ADF. Misfeeding may wrinkle or
damage the original. Scan these documents on the scanner glass instead.
Remove any documents from the scanner glass. Make sure there is no dust on the glass before
loading documents in the ADF.
Slide the edge guides on the ADF input tray all the way outward.
Place the first page of your document in the ADF input tray with the printed side up and the top edge first. Slide the
paper into the feeder until it meets resistance. Then slide the edge guides to the edges of the paper.