User's Guide
• You may need to disable the firewall and any anti-virus software on your wireless router or access
point.
• If you see the message "Network product is not available: currently being used by user", there may be
a communication error between the scanner and computer. Restart the scanner.
• Epson Scan does not support networks that use only IPv6. Use Epson Scan on a network that
supports IPv4.
• If the Firewall function is active on Windows XP or later, the scanner may not be discovered by Epson
Scan Settings. Open Epson Scan Settings, click Add, and enter the IP address for your scanner.
Parent topic: Solving Scanning Problems
Related topics
Wi-Fi Networking
Scanner Cannot Connect to a Wireless Router or Access Point
If your scanner has trouble finding or connecting to a wireless router or access point, try these solutions:
• If you are connecting the scanner via Wi-Fi Protected Setup (WPS), make sure you press the WPS
button on the router or access point within 2 minutes of activating WPS on your scanner.
• Make sure to place your scanner within contact range of your router or access point. Avoid placing
your scanner near a microwave oven, 2.4 GHz cordless phone, or large metal object, such as a filing
cabinet.
Note: If you are using a 5 GHz wireless router, set the router to operate in dual band (2.4 GHz and 5
GHz) mode. See your router documentation for instructions.
• Verify that your router or access point is operating correctly by connecting to it from your computer or
another device.
• You may need to disable the firewall and any anti-virus software on your wireless router or access
point.
• Check to see if access restrictions, such as MAC address filtering, are set on the router or access
point. If access restrictions are set, add your scanner's MAC address to your router's address list. To
obtain your scanner's MAC address, check the label on the back of your scanner. Then follow the
instructions in your router or access point documentation to add the address to the list.
• If your router or access point does not broadcast its network name (SSID), follow the instructions that
came with your scanner to enter your wireless network name manually.
88