Product Support Bulletin

ON Professio

lGr

phics Group

Note: The Standard EPSON Printer Driver and Status Monitor 3 must be installed in order to use this

software.

System Requirements:

Microsoft

Windows

: Windows 95, 98, Millennium Edition, 2000, XP or NT 4.0 with EPSON Standard Printer Driver

and EPSON Status Monitor 3 installed and USB, IEEE1394 or Parallel connection.

Apple

Macintosh

: Mac OS 8.6 to 9.2.2 with USB or IEEE1394 connection with EPSON Standard Printer Driver

(Status Monitor is part of driver) installed.

Note: Ethernet Connection is not supported on either platform.

Minimum of 30Mb free Hard Disk space and 128Mb RAM (both Macintosh and PC platforms).

Basic Output Quality Requirements:

When performing these and any adjustments, it is recommended to use EPSON genuine coated media such as

Enhanced Matte Paper, Doubleweight Matte Paper, Photo Semigloss Papers or Photo Glossy Papers. Also prior to

performing any adjustments, always perform a nozzle check to ensure no nozzles are missing so that the best print

quality will be possible. The nozzle check can be performed from either the Control Panel of the printer or via the Util-

ity tab of the printer driver.

Firmware Compatibility Requirements:

In order for the Print Head Alignment utility to function properly, please update your printers Firmware to version

BN0526 (SP7600) or BW0526 (SP9600) or Higher. For information on updating your printers firmware, please refer

to page 28.