Product Information Guide

EPSON Stylus Pro 9000 series
6 - EPSON Stylus Pro 9000 series 8/00
Options
Control Panel
Control Panel Buttons and Functions
Control Panel Lights and Messages
Normal printer operation
Option Product Code
EPSON RS-5100 Fiery X2 Printing System:
EPSON Stylus Pro 9000
EPSON Stylus Pro 9500
C850122
C850152
Automatic take-up reel system C815082
Replacement 44” take-up reel core C815121
Roll paper spindle—2 inch C811041
Roll paper spindle—3 inch C811051
High tension spindle—2 inch C811042
High tension spindle—3 inch C811052
Replacement cutter blade C815131
EpsonNet Internal Print Server
(multiprotocol 10/100 Base-TX Ethernet Card)
C823632A
EPSON FireWire
®
Interface Card C823722
Printer only service plan—1 year EPP90B1
Printer only service plan—2 years EPP90B2
Printer and EPSON RS-5100 service plan—1 year EPP90S1
Printer and EPSON RS-5100 service plan—2 years EPP90S2
Power
Operate
Sheet
Paper Out
Roll
Cutter Off
Roll
Auto Cut
Cleaning
3 sec.
Enter
Cut /Eject
_
Paper Feed
+
Item
Paper Source
SelecType
Reset
3 sec.
Pause
Ink Out
KC LCMLMY
display
Button Function
Power Turns the printer on and off.
Cleaning Runs print head cleaning when pressed for
3 seconds.
Pause (Reset 3 Sec.) Stops printing temporarily. Press a second
time to resume printing.
Clears print data in the printer memory if
pressed and held for three seconds.
Returns the printer to READY status, when
pressed in SelecType mode.
SelecType Causes the printer to enter SelecType mode
when pressed in READY status.
In SelecType mode, this button can be used
to select a desired menu.
Paper Source (Item) Selects the paper source:
Roll Auto Cut
,
Roll
Cutter Off
, or
Sheet
. If you press this button
during the ink drying process, you will need to
press
Enter
to make your setting.
In SelecType mode, this button can be used
to select an item in a menu.
Paper Feed
▲
(+) Feeds paper in reverse.
In SelecType mode, a desired parameter can
be selected for the item (forward order).
Paper Feed
▼
(–) Feeds paper forward.
In SelecType mode, a desired parameter can
be selected for the item (reverse order).
Cut/Eject (Enter) Ejects the cut sheet when the
Sheet
light is
on.
Feeds the roll paper before cutting it when the
Roll Auto Cut
light is on.
Feeds the roll paper a small amount when the
Roll Cutter Off
light is on.
Feeds the roll paper and then prints a page
line below the document when the
Roll Cutter
Off
light and
Print Page Line
option are on.
In SelecType mode, sets the selected
parameter for an item as the default value.
Message/Light Explanation
READY
/
Operate
light on Printer is ready to print.
PRINTING
/
Operate
light
flashing
Printer is receiving data.
INK DRY <number> MIN
/
Pause
light flashing
Printer is paused to let ink dry. Wait
for the number of minutes shown.
RESET
/ all lights flash briefly Printer is resetting.
PRESS PAUSE BUTTON
/
Pause
light on
Press the
Pause
button to continue.
WAIT
/
Pause
light on or
flashing
Printer is warming up, performing
maintenance, or charging ink.
PAUSE/ Pause light on
Printer is paused. To resume printing,
press the
Pause
button.