Product Information Guide

EPSON Stylus Pro 9000 series
8/00 EPSON Stylus Pro 9000 series - 3
Mechanical
Environmental
Safety Approvals
Interfaces
Parallel interface
The built-in parallel interface supports compatibility and ECP
modes.
Compatibility mode
Forward channel
Reverse channel
ECP mode
You can use a USB conversion cable, such as the EPSON USB
adapter (C-USB-PK4), to connect to the printer’s parallel
port. Make sure the printer’s parallel interface is set to
compatible (the default setting).
Paper feed
method
Friction
Paper path Roll paper or cut sheets with manual
insertion
Dimensions Width: 66.46 inches (1688 mm)
Depth: 27.52 inches (699 mm)
Height: 49.57 inches (1259 mm)
Weight 211.64 lb (96 kg) without ink cartridges
Temperature Operation: 50 to 95 °F (10 to 35 °C)
Storage:
–
4 to 104 °F (
–
20 to 40 °C)
1 month at 104 °F (40 °C)
Transit
–
4 to 140 °F (
–
20 to 60 °C),
stored in shipping container
120 hours at 140 °F (60 °C)
Humidity
(without
condensation)
Operation: 20 to 80% RH
Storage: 20 to 85% RH
Transit 5 to 85% RH (stored in
shipping container)
Safety standards UL 1950, CSA C22.2 950
EMC FCC part 15 subpart B class B
CSA C108.8 class B
Data format 8-bit parallel, IEEE-1284 compatibility
mode
Synchronization
STROBE
pulse
Handshake
timing
BUSY
and
ACKNLG
signals
Signal level TTL compatible
Connector 57-30360 Amphenol connector or
equivalent
Transmission
mode
IEEE-1284 Nibble mode
Adaptable
connector
57-30360 Amphenol connector or
equivalent
Synchronization Refer to the IEEE-1284 specification
Handshaking Refer to the IEEE-1284 specification
Signal level IEEE-1284 Level 1 device
Data
transmission
timing
Refer to the IEEE-1284 specification
Transmission
mode
IEEE-1284 ECP mode
Adaptable
connector
57-30360 Amphenol connector or
equivalent
Synchronization Refer to the IEEE-1284 specification
Handshaking Refer to the IEEE-1284 specification
Signal level IEEE-1284 Level 1 device
Data
transmission
timing
Refer to the IEEE-1284 specification