Product Guide
Table Of Contents
- Front Matter
- Contents
- Introduction
- Chap1-Connecting Your Printer and Installing Drivers
- Chap 2-Handling Paper
- Chap 3-Printing with EPSON Drivers for Macintosh
- Chap 4-Printing with EPSON Drivers for Windows
- Chap 5-Monitoring the Printer
- Chap 6-Maintaining and Transporting the Printer
- Running a Cleaning Cycle
- Aligning the Print Head
- Running the Print Head Alignment Utility
- Replacing Ink Cartridges
- Replacing the Paper Cutter Blade
- Running the Speed and Progress Utility for Improved Windows Printing
- Cleaning the Printer
- Transporting the Printer
- Replacing the Waste Ink System
- Diagnosing Problems
- Chap 7-Resolving Problems
- Chap 8-Specifications
- Appendix A-Configuring the Printer
- Index
3-12
3-12 | Printing with EPSON Drivers for Macintosh
•Print Time
opens the Set Print Time
dialog box. Enter the date and time
you want to print the document, then
click
OK
.
Click
Stop Print Queue
to stop all printing
until you click
Start Print Queue.
You can also click to check your ink levels or click to start the print
head cleaning utility. See page 6-2 for more information about the cleaning
utility.
Cancelling Printing
If you need to cancel a print job, follow these steps:
1. Press the
Power
button to turn off the printer.
2. Do one of the following, depending on whether you’re using
background printing:
•
If background printing is turned off, hold down the
J key on your
keyboard and press the (.) period key to cancel the print job.
•
If background printing is turned on, select
EPSON Monitor3
from
the application menu. Click the
button, then click the stop
button
to cancel the print job.