Product Guide
Table Of Contents
- Front Matter
- Contents
- Introduction
- Chap1-Connecting Your Printer and Installing Drivers
- Chap 2-Handling Paper
- Chap 3-Printing with EPSON Drivers for Macintosh
- Chap 4-Printing with EPSON Drivers for Windows
- Chap 5-Monitoring the Printer
- Chap 6-Maintaining and Transporting the Printer
- Running a Cleaning Cycle
- Aligning the Print Head
- Running the Print Head Alignment Utility
- Replacing Ink Cartridges
- Replacing the Paper Cutter Blade
- Running the Speed and Progress Utility for Improved Windows Printing
- Cleaning the Printer
- Transporting the Printer
- Replacing the Waste Ink System
- Diagnosing Problems
- Chap 7-Resolving Problems
- Chap 8-Specifications
- Appendix A-Configuring the Printer
- Index
3-2
3-2 | Printing with EPSON Drivers for Macintosh
3. Select the type of paper you loaded in the printer from the
Paper
Source
list.
If your image is more than 62 inches long, select
Roll Paper (Banner)
.
You can also use this setting to print a series of continuous images
without any “margin space” between them.
4. When you’re using roll paper, set the following options:
• Auto Rotate
Saves paper if your document length is shorter than the printable
width of the paper roll. Your image will be turned automatically by
90 degrees and printed crosswise. This setting is not available for
Roll Paper (Banner).
•Auto Cut
Choose this option if you want the paper to be cut automatically
after each page is printed.
• Print Page Line
Prints trim lines on the right and bottom edges of your pages.
• Save Roll Paper
Saves paper by not feeding the blank portion of the last page of your
document. Applicable in Roll Paper (Banner) mode only.
5. Make the settings you want for
Orientation
and
Reduce or Enlarge
.
6. After making your settings, click
OK
.