Product Guide
Table Of Contents
- Front Matter
- Contents
- Introduction
- Chap1-Connecting Your Printer and Installing Drivers
- Chap 2-Handling Paper
- Chap 3-Printing with EPSON Drivers for Macintosh
- Chap 4-Printing with EPSON Drivers for Windows
- Chap 5-Monitoring the Printer
- Chap 6-Maintaining and Transporting the Printer
- Running a Cleaning Cycle
- Aligning the Print Head
- Running the Print Head Alignment Utility
- Replacing Ink Cartridges
- Replacing the Paper Cutter Blade
- Running the Speed and Progress Utility for Improved Windows Printing
- Cleaning the Printer
- Transporting the Printer
- Replacing the Waste Ink System
- Diagnosing Problems
- Chap 7-Resolving Problems
- Chap 8-Specifications
- Appendix A-Configuring the Printer
- Index

2-15
Handling Paper | 2-15
3. Make sure the
Operate
light and
Pause
light are not flashing. Then
push the paper set lever all the way down.
4. Feed the sheet into the paper slot until it extends through the slot. Align
the paper with the two rows of holes.
5. Pull the paper set lever all the way up.
PRESS PAUSE BUTTON
appears on the control panel display.
Caution
Avoid touching the
printable surface of the
paper with bare hands.
Fingerprints may affect
print quality.