Product Guide
Table Of Contents
- Front Matter
- Contents
- Introduction
- Chap1-Connecting Your Printer and Installing Drivers
- Chap 2-Handling Paper
- Chap 3-Printing with EPSON Drivers for Macintosh
- Chap 4-Printing with EPSON Drivers for Windows
- Chap 5-Monitoring the Printer
- Chap 6-Maintaining and Transporting the Printer
- Running a Cleaning Cycle
- Aligning the Print Head
- Running the Print Head Alignment Utility
- Replacing Ink Cartridges
- Replacing the Paper Cutter Blade
- Running the Speed and Progress Utility for Improved Windows Printing
- Cleaning the Printer
- Transporting the Printer
- Replacing the Waste Ink System
- Diagnosing Problems
- Chap 7-Resolving Problems
- Chap 8-Specifications
- Appendix A-Configuring the Printer
- Index

2-7
Handling Paper | 2-7
5. To keep the paper wound when you’re not printing, use the roll paper
belt included with your printer.
6. See the next section to load the paper for printing.
Loading Roll Paper for Printing
Once the roll paper is attached to the spindle and inserted in the printer,
you’re ready to load it for printing. Follow these steps:
1. Make sure the printer is turned on. Then press the
Paper Source
button until one of the
Roll
lights comes on.
Caution
To avoid feeding excess
paper through the printer,
make sure you don’t
select Sheet when you’re
using roll paper.