Product Guide
Table Of Contents
- Front Matter
- Contents
- Introduction
- Chap1-Connecting Your Printer and Installing Drivers
- Chap 2-Handling Paper
- Chap 3-Printing with EPSON Drivers for Macintosh
- Chap 4-Printing with EPSON Drivers for Windows
- Chap 5-Monitoring the Printer
- Chap 6-Maintaining and Transporting the Printer
- Running a Cleaning Cycle
- Aligning the Print Head
- Running the Print Head Alignment Utility
- Replacing Ink Cartridges
- Replacing the Paper Cutter Blade
- Running the Speed and Progress Utility for Improved Windows Printing
- Cleaning the Printer
- Transporting the Printer
- Replacing the Waste Ink System
- Diagnosing Problems
- Chap 7-Resolving Problems
- Chap 8-Specifications
- Appendix A-Configuring the Printer
- Index
1-8
1-8 | Connecting Your Printer and Installing Drivers
Setting Up Printer Sharing
If you want to share the printer, you first need to set it up as a shared printer
on the Macintosh to which it is connected. Then, you must specify the
network path to the printer from each Macintosh that will use it, and install
the printer software on those Macintosh systems.
Follow these steps to share a printer connected directly to a Macintosh with
other systems on an AppleTalk
®
network.
1. Turn on the printer.
2. Open the Chooser and click the printer’s icon. Then select the port to
which the printer is connected.
3. Click the
Setup
button. You see the following dialog box:
4. Check
Share this Printer
, then type the printer name and password
information as needed.