Product Guide
Table Of Contents
- Front Matter
- Contents
- Introduction
- Chap1-Connecting Your Printer and Installing Drivers
- Chap 2-Handling Paper
- Chap 3-Printing with EPSON Drivers for Macintosh
- Chap 4-Printing with EPSON Drivers for Windows
- Chap 5-Monitoring the Printer
- Chap 6-Maintaining and Transporting the Printer
- Running a Cleaning Cycle
- Aligning the Print Head
- Running the Print Head Alignment Utility
- Replacing Ink Cartridges
- Replacing the Paper Cutter Blade
- Running the Speed and Progress Utility for Improved Windows Printing
- Cleaning the Printer
- Transporting the Printer
- Replacing the Waste Ink System
- Diagnosing Problems
- Chap 7-Resolving Problems
- Chap 8-Specifications
- Appendix A-Configuring the Printer
- Index
1-4
1-4 | Connecting Your Printer and Installing Drivers
8. Connect the appropriate cable to the card and to your network hub or
computer.
To remove an interface card, turn off the printer, unplug the power cord,
and follow the steps in reverse order.
Before you can use the EpsonNet Internal Print Server, you must configure
it for your network protocols and operating system. See the EpsonNet
Internal Print Server Administrator’s Manual
for instructions.
Before you can print, you must install the printer software, as described on
page 1-7 (Macintosh) or page 1-10 (Windows).