Product Guide
Table Of Contents
- Front Matter
- Contents
- Introduction
- Chap1-Connecting Your Printer and Installing Drivers
- Chap 2-Handling Paper
- Chap 3-Printing with EPSON Drivers for Macintosh
- Chap 4-Printing with EPSON Drivers for Windows
- Chap 5-Monitoring the Printer
- Chap 6-Maintaining and Transporting the Printer
- Running a Cleaning Cycle
- Aligning the Print Head
- Running the Print Head Alignment Utility
- Replacing Ink Cartridges
- Replacing the Paper Cutter Blade
- Running the Speed and Progress Utility for Improved Windows Printing
- Cleaning the Printer
- Transporting the Printer
- Replacing the Waste Ink System
- Diagnosing Problems
- Chap 7-Resolving Problems
- Chap 8-Specifications
- Appendix A-Configuring the Printer
- Index
1
You can use the SelecType menus on the printer’s control panel to configure
printer settings (as well as check the printer and perform maintenance
operations.) The following table lists the menus, their functions, and where
to find additional information:
This chapter describes the following configuration settings:
•
Selecting the printer’s interface
•
Configuring the parallel interface
•
Changing the printer’s code page setting
•
Setting the control panel language
•
Restoring default settings
SelecType menus
Menu Description
For more
information,
see page
Printer Setting Configure the printer 2-12, 2-18
Test Print Print a nozzle check or status check 6-1, 5-4
Printer Status Check ink levels and component life 5-3
Paper
Configuration
Register paper thickness and drying time,
and select registered configurations
2-21
Cutter
Replacement
Replace the paper cutter blade 6-9
Head Alignment Align the print head 6-5
Appendix A:
Configuring
the Printer