Product Guide
Table Of Contents
- Front Matter
- Contents
- Introduction
- Chap1-Connecting Your Printer and Installing Drivers
- Chap 2-Handling Paper
- Chap 3-Printing with EPSON Drivers for Macintosh
- Chap 4-Printing with EPSON Drivers for Windows
- Chap 5-Monitoring the Printer
- Chap 6-Maintaining and Transporting the Printer
- Running a Cleaning Cycle
- Aligning the Print Head
- Running the Print Head Alignment Utility
- Replacing Ink Cartridges
- Replacing the Paper Cutter Blade
- Running the Speed and Progress Utility for Improved Windows Printing
- Cleaning the Printer
- Transporting the Printer
- Replacing the Waste Ink System
- Diagnosing Problems
- Chap 7-Resolving Problems
- Chap 8-Specifications
- Appendix A-Configuring the Printer
- Index
6-16
6-16 | Maintaining and Transporting the Printer
5. If you’re using the stand, remove the wing screws and washers from the
left and right sides, and keep them in a safe place.
6. Have two or more people lift the printer off the stand, using the hand
grips.
7. Keep the printer level while you move it.
Warning
The printer weighs
approximately 96 lb
(43.5 kg). Always have two
or more people lift it, using
the hand grip areas as
shown.