Product Guide
Table Of Contents
- Front Matter
- Contents
- Introduction
- Chap1-Connecting Your Printer and Installing Drivers
- Chap 2-Handling Paper
- Chap 3-Printing with EPSON Drivers for Macintosh
- Chap 4-Printing with EPSON Drivers for Windows
- Chap 5-Monitoring the Printer
- Chap 6-Maintaining and Transporting the Printer
- Running a Cleaning Cycle
- Aligning the Print Head
- Running the Print Head Alignment Utility
- Replacing Ink Cartridges
- Replacing the Paper Cutter Blade
- Running the Speed and Progress Utility for Improved Windows Printing
- Cleaning the Printer
- Transporting the Printer
- Replacing the Waste Ink System
- Diagnosing Problems
- Chap 7-Resolving Problems
- Chap 8-Specifications
- Appendix A-Configuring the Printer
- Index
6-12
6-12 | Maintaining and Transporting the Printer
4. Push in the side pin while turning the paper cutter cover to the left to
close the casing.
CLOSE LOWER COVER
appears on the display.
5. Close the lower cover. The cutter holder moves to the home (far right)
position and
READY
appears on the display.
After you replace the cutter blade, the print head nozzles may be clogged.
Run a nozzle check and cleaning cycle if necessary.
Running the Speed and Progress Utility for
Improved Windows Printing
With this utility, you can speed up the way your printer driver processes
multiple-copy print jobs, optimize your printer port for the fastest data
transfer rate, and configure the progress meter.
To access the Speed & Progress dialog box, you must open your printer
software from the Windows Printers utility as described below.
1. Click
Start
, point to
Settings
, then click
Printers.
2. Right-click your printer icon and select Properties (Windows 95 and 98)
or Document Defaults (Windows NT) from the menu.
3. Click the
Utility
tab. You see the Utility menu.
4. Click the
Speed & Progress
button.