Product Guide
Table Of Contents
- Front Matter
- Contents
- Introduction
- Chap1-Connecting Your Printer and Installing Drivers
- Chap 2-Handling Paper
- Chap 3-Printing with EPSON Drivers for Macintosh
- Chap 4-Printing with EPSON Drivers for Windows
- Chap 5-Monitoring the Printer
- Chap 6-Maintaining and Transporting the Printer
- Running a Cleaning Cycle
- Aligning the Print Head
- Running the Print Head Alignment Utility
- Replacing Ink Cartridges
- Replacing the Paper Cutter Blade
- Running the Speed and Progress Utility for Improved Windows Printing
- Cleaning the Printer
- Transporting the Printer
- Replacing the Waste Ink System
- Diagnosing Problems
- Chap 7-Resolving Problems
- Chap 8-Specifications
- Appendix A-Configuring the Printer
- Index
6-10
6-10 | Maintaining and Transporting the Printer
4. When the holder stops moving and
OPEN LOWER COVER
appears on
the display, open the lower cover by pulling down on the handles.
5. When
REPLACE CUTTER
appears on the display, you can open the
casing. Push in the side pin while turning the paper cutter cover to the
right.
6. Slowly take your finger off the side pin. The paper cutter raises so it can
be removed.
Note
Be careful not to let the
cutter or the spring coil
pop out of the casing.