User's Guide

Installing and Setting Up the Server Software | 9

3. When you see this message, click OK.

4. When you see this message, click

OK.

5. Type a name for the printer in the Printer Name box. It can be any

name you want. This name is used only within the RIP/server interface

and is not the name that will be used on the network. (See “Setting the

Print Server Name” on page 13 to change the RIP name used on the

network.)

6. Choose

USB or Ethernet as the Printer Connection setting.

7. Choose

Stylus Pro 4000 from the Which Printer list that appears, if

necessary.

If you see the message “There are no printers connected to this

computer using USB,” check your USB connection and make sure the

printer is set up and turned on as described on your Stylus Pro 4000

Start Here sheet.

ColorBurst.book Page 9 Thursday, September 9, 2004 12:41 PM