User's Guide

Installing and Setting Up the Server Software | 19

•

Choose Roll fed media or Sheet fed media, depending on the

paper source you are using

• Choose Borderless printing to allow edge-to-edge printing

• Choose Bidirectional Printing to print in both directions (turn

this off for best quality)

• Choose Cut media to allow the printer to use the printer’s cut

method to cut roll paper

• Enter a value in the Micro media feed adjustment box if you

need to adjust the setting for precise paper feeding

7. Click

OK.

8. From the Environment menu, click

Load.

9. Open the

Color or Grayscale folder, then choose the environment file

for your paper type and resolution.

10. Click

Open, then click Yes.

11. Click

Start Spooler to start the RIP.

ColorBurst.book Page 19 Thursday, September 9, 2004 12:41 PM