User's Guide

18
18 | Installing and Setting Up the Server Software
3. From the Options menu, choose Printer Options, then click the
General tab.
4. Under Print Queue, choose
EPSON Stylus Pro 4000.
5. Click
Use page dimensions to set paper width and height settings, to
center the image on the page, or offset it by a specific distance.
6. Click the
Epson 4000 tab.
Make changes to these settings, as necessary:
• Choose 4 Pass for the MicroWeave
®
setting. If you notice any type
of banding, then try
8 Pass. If you still see banding in 8 Pass mode,
perform a nozzle check (see your Stylus Pro 4000 Printer Guide for
details).
Note: The Use page
dimensions options are
only used for files with
unknown page
description information,
such as when you drop a
TIFF or JPEG file into a
hot folder. If you are
printing from an
application, your print
settings will override
these settings.
ColorBurst.book Page 18 Thursday, September 9, 2004 12:41 PM