User's Guide

14 | Installing and Setting Up the Server Software

Enabling the RIP to Receive Print Jobs and Print

By default, the ColorBurst RIP receives and holds print jobs until it is set to

RIP On and the print jobs are activated. You can change this setting to

automatically receive and print jobs as they are sent to the RIP.

1. To start the RIP server, double-click the

ColorBurst RIP for Epson

icon on your desktop.

Or double-click the

ColorBurst RIP icon in the

Applications > ColorBurst RIP for Epson folder.

You see the ColorBurst RIP server window:

2. To enable the RIP to print active jobs, click the

RIP On button.

3. To receive print jobs with active status and automatically print them in

the order they are received, click the

Receive On Hold checkbox to

deselect it. If you keep it selected, all the print jobs that are sent to the

RIP will be held until you activate them.

RIP On button Receive On Hold box

ColorBurst.book Page 14 Thursday, September 9, 2004 12:41 PM