User's Guide

Installing and Setting Up the Server Software | 13

5. Click OK. You return to the ColorBurst RIP server window.

Continue with the next section to set a Print Server Name.

Setting the Print Server Name

Before you set up any client computers to print to the RIP, you should check

the Print Server Name and change it, if desired. You need to know the Print

Server Name to set up Windows clients to print to the ColorBurst RIP.

1. Choose

Preferences from the ColorBurst RIP menu. You see this

menu:

2. Write down the Print Server Name that appears in the box (the default

is ColorBurst_RIP), or change it to something else to identify the

printer over the network.

3. When you are done, click

OK.

Note: For Windows

clients, you also need to

know the IP address of

the computer that is

running the ColorBurst

RIP. The IP address

should be static (manual

setting) and can be

found under the System

Preferences > Network

settings.

Print Server

Name

ColorBurst.book Page 13 Thursday, September 9, 2004 12:41 PM