Quick Installation Guide

12 | Quick Installation Guide
5. Enter the appropriate information for the Fiery Spark, then click Add.
[
6. Make sure the printer name is selected in the Devices list, then click OK.
7. At the next window, select the printer name in the list of Available Servers,
then click
Select.
8. After ColorWise Pro Tools is installed, you see the following window:
For this printer... Enter this New Device name...
Stylus Pro 7600 UltraChrome Pro7600UC
Stylus Pro 9600 UltraChrome Pro9600UC
Stylus Pro 10000 PhotoGraphic Dye Pro10000DYE
Stylus Pro 10000 Archival Ink Pro10000CF
Stylus Pro 10600 UltraChrome Pro10600UC
Stylus Pro 10600 PhotoGraphic Dye Pro10600DYE
Stylus Pro 10600 Archival Ink Pro10600CF
The nickname can be
different from the Fiery Spark
server name, but cannot
contain [ ] _ " ' <space> <tab>
Type localhost
Click Add
Enter the device
name for your
printer listed in
the following
table