Product Information Guide

EPSON Stylus Pro 10000
5/01 EPSON Stylus Pro 10000 - 3
Interfaces
Parallel interface
The built-in parallel interface supports compatibility and ECP
modes.
Compatibility mode
Forward channel
Reverse channel
ECP mode
USB interface
Supported Connections
* Supported on pre-installed operating systems, not upgraded from
earlier versions of Windows
®
.
Data format 8-bit parallel, IEEE-1284 compatibility
mode
Synchronization
STROBE
pulse
Handshake
timing
BUSY
and
ACKNLG
signals
Signal level TTL compatible
Connector 57-30360 Amphenol connector or
equivalent
Transmission
mode
IEEE-1284 Nibble mode
Adaptable
connector
57-30360 Amphenol connector or
equivalent
Synchronization Refer to the IEEE-1284 specification
Handshaking Refer to the IEEE-1284 specification
Signal level IEEE-1284 Level 1 device
Data
transmission
timing
Refer to the IEEE-1284 specification
Transmission
mode
IEEE-1284 ECP mode
Adaptable
connector
57-30360 Amphenol connector or
equivalent
Synchronization Refer to the IEEE-1284 specification
Handshaking Refer to the IEEE-1284 specification
Signal level IEEE-1284 Level 1 device
Data
transmission
timing
Refer to the IEEE-1284 specification
Standard Based on Universal Serial Bus Specifications
Revision 1.1, Universal Serial Bus Device
Class Definition for Printing Devices
Version 1.1
Bit rate Approximately 12M bps (full speed device)
Data encoding NRZI
Connector USB Series B
Recommended
cable length
6 feet
System
Parallel
(standard)
USB
(standard)
IEEE 1394
(standard)
Ethernet
®
(optional)
Win 95 X X
Win 98 X X* X
Win Me X X* X X
Win NT X X
Win 2000 X X* X X
Mac
®
OS 8.51 X X
Mac OS 8.6 X X X
Mac OS 9.x X X X