Product Information Guide

EPSON Stylus Pro 10000
10 - EPSON Stylus Pro 10000 5/01
Following is a list of the items displayed. All parts on the list
except the ink cartridges and paper cutter need to be
replaced by an authorized EPSON service center.
INK LEFT-K
(black)
TOTAL PRINTS
INK LEFT-C
(cyan)
WASTE INK
INK LEFT-M
(magenta)
CR MOTOR
INK LEFT-LC
(light cyan)
PF MOTOR
INK LEFT-LM
(light magenta)
HEAD UNIT
INK LEFT-Y
(yellow)
CLEANER
CUTTER LIFE
4. Press the
SelecType
button to exit the Printer Status
menu.
Replacing an Ink Cartridge
When one of the
Ink Out
lights is flashing (and
INK LOW
is
displayed on the control panel), the corresponding cartridge is
almost out of ink. Make sure you have a replacement
cartridge. When the light stays on and
INK OUT
is displayed,
the cartridge is empty. You must replace the cartridge before
you can continue printing.
Note:
You must use the EPSON ink cartridges designed for your printer.
Other ink cartridges will not work and may cause damage not
covered by your warranty. If you don’t use the cartridges designed for
your model, you will see an error message.
Use only the following EPSON ink cartridges:
Before you start, make sure the printer is turned on. Then
follow these steps to replace an ink cartridge:
1. Note the color of the
Ink Out
light which is on or flashing.
This is the cartridge that you need to replace.
2. Push the indentation on the ink compartment cover to
release the lock and open the cover.
INK COMPART. OPEN
appears on the control panel display.
EPSON Stylus Pro 10000 Photographic Dye Ink
Cartridge Part number
Black T499201
Cyan T502201
Light Cyan T504201
Magenta T501201
Light Magenta T503201
Yellow T500201
EPSON Stylus Pro 10000 Archival Ink
Cartridge Part number
Black T511201
Cyan T514201
Light Cyan T516201
Magenta T513201
Light Magenta T515201
Yellow T512201