Product Information Guide

ManualsBrandsEpson ManualsAll in One PrinterEpson Epson Stylus Photo RX700 All-in-One Printer

Epson Stylus Photo RX700

16 - Epson Stylus Photo RX700 5/05

Aligning the Print Head

If your printouts have vertical lines that appear jagged, you

may need to align the print head.

1. Make sure plain letter-size paper is loaded in the front tray

(see page 4).

2. Press the

Setup button, select Head Alignment, then press

the

OK button.

3. Press

OK again to print the alignment pattern.

4. Examine the printout. For each section (#1 through #4),

circle the box with the least amount of streaking (light or

dark vertical lines). You may need to use a magnifying glass

or loupe.

5. On the RX700 screen, use the l and r buttons to select the

number of the circled box in section #1.

6. Press the d button to highlight each of the remaining

sections (#2, #3, and #4), and use the l and r buttons to

select the circled number for each one.

7. Press

OK when done.

8. You see a message that head alignment is complete. Press

OK to return to the Setup menu.

Transporting the RX700

If you move your RX700 some distance, you need to prepare

it for transportation in its original box or one of a similar size.

Caution:

To avoid damage, always leave the ink cartridges installed when

transporting the RX700. Never transport or store the RX700 on its

side or in a tilted or upside-down position.

1. Press the POn button to turn off the RX700. Wait until

the Ppower light turns off, then unplug the RX700 from

the electrical outlet and disconnect the USB cable from

your computer.

2. Open the scanner lid and slide the transportation lock to

the locked position. Then close the scanner lid.

Caution:

Be sure to move the transportation lock back to the unlocked

position after installing the RX700 in its new location.

3. Remove any paper from the RX700. Then close the paper

output tray, CD/DVD guide, front paper tray, and rear

sheet feeder.

4. Repack the RX700 and in its original box (or equivalent)

using the protective materials that came with it.

Caution:

Keep the RX700 level as you transport it.

After transporting the RX700, unlock the transportation lock

and print a test copy. If you notice a decline in quality, clean

the print head (see page 14); if output is misaligned, align the

print head (see “Aligning the Print Head” on this page).