Basic Guide
Table Of Contents
- Front Matter
- Contents
- Welcome!
- Copying
- Making Prints From Your Digital Camera
- Printing on CDs and DVDs
- Scanning to a Memory Card
- Saving and Storing Photos
- Maintaining Your RX700
- Solving Problems
- Notices
- Index
- How to Copy, Print, and Scan Without a Computer
- How To Order Epson Ink and Paper
- Warranty
Quick Printing of 4 × 6-inch Snapshots 29
The memory card light flashes, then turns green.
Caution:
Do not insert more than one card at a time.
Wait for the memory card light to stop flashing before removing your card or turning off
the RX700, or you may lose data on the card.
Remove any cards before connecting or disconnecting the RX700 and your computer.
Quick Printing of 4 × 6-inch Snapshots
After inserting a memory card, you can view and select the photos you want to
print from the RX700 screen. Follow these steps to make beautiful 4 × 6-inch
borderless prints quickly and easily. You’ll need to have some 4 × 6-inch Epson
Premium Glossy Photo Paper before starting.
1. Load up to 20 sheets of 4 × 6-inch Epson Premium Glossy Photo Paper in the
rear sheet feeder.
2. Press the
Memory Card button.
3. Select
Basic Print 4"×6", then press OK.
You see your memory card’s first photo displayed on the screen:
4. Use the l and r arrow buttons to preview each of your photos.
5. While a photo is displayed, use the
+ and – buttons to select how many copies
of it you’d like.
Memory
card light