Basic Guide

Copying Text and Graphics 15
5. Press the
Copy button. You see this screen:
Note:
The RX700 retains the last settings you used, so always check them to make sure
they’re the ones you want to copy with.
6. Use the u, d, l, r arrow buttons to select these settings:
■ Copy Layout: Set to Copy w/Borders (you can’t use the Borderless
setting when making plain-paper copies) or see page 18 for more options.
■ Paper Type: Select Plain(Front) if you’ve loaded plain paper in the front
tray. If you’ve loaded plain paper in the back tray, select
Plain(Back).
■ Paper Size: Letter is automatically selected. (You can’t change this
setting when plain paper is chosen as the Paper Type.)
■ Quality: Make quick copies (Draft) or quality copies of text and graphics
(
Text).
7. To change the number of copies (from 1 to 99), use the
+ and – buttons.
8. To resize the original, highlight
Zoom In/Out and press OK.
■ Use the + and – buttons to resize the original (from 25% to 400%).
■ Use Auto Fit Page to automatically fit the copy to the selected paper size.
■ To print your copy at its original size, select Actual.
9. Press the x
Color button (for color copies) or the x B&W button (for black-
and-white copies). Your document is copied. To cancel a copy job in progress,
press the y
Stop button.
Tip:
If you need to make your copies lighter or darker, press the Options button and adjust
the Copy Density, or select Auto Document to set the copy density automatically for
plain-paper, letter-size copies. Press OK when done to apply the setting.
Arrow
buttons